TOWOT
TOWOT Solder Wick & Solder Wire & Solder Sucker Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid
Bottom line: The TOWOT Solder Wick & Solder Wire & Solder Sucker Used to Remove the ($8.99 on Amazon as of 2026-10-06): Three tools in one kit: braid, vacuum pump, and 1.0mm solder wire; main trade-off: only 10g of solder wire included - a light roll for regular use.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Three tools in one kit: braid, vacuum pump, and 1.0mm solder wire
- ✓ One-handed vacuum button clears a joint while you hold the iron
- ✓ No-clean rosin-impregnated copper braid skips the flux cleanup step
- ✓ Anti-static nylon nozzle is safer around exposed ICs and boards
Cons
- ✗ Only 10g of solder wire included - a light roll for regular use
- ✗ 30-day return window is short for a tool you use occasionally
- ✗ Braid is listed at 1.5mm length and 50mm width, an odd spec listing
- ✗ ABS pump body is less durable than aluminum-barrel desoldering pumps
Manufacturer description
Desoldering is where most retro PC repairs stall, and the TOWOT 3-in-1 solder set covers all three jobs without forcing you to buy separately. The kit pairs a no-clean copper braid, a 21cm vacuum desoldering pump, and a 10g roll of 1.0mm solder wire, which is the exact combination you need for pulling a leaky capacitor, lifting a socketed chip, or correcting a bridged trace on a vintage motherboard. The pump uses a double-ring plunger with a one-touch vacuum button, so you can tilt the tip into molten solder and clear a joint one-handed while your other hand holds the iron. Its ABS body is…
SpecPicks Verdict
SpecPicks scored TOWOT Solder Wick & Solder Wire & Solder Sucker Used to Remove the… using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. TOWOT's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What comes in the TOWOT solder kit?
Three items: a no-clean copper solder wick braid, a 21cm vacuum solder sucker pump, and a 10g roll of 1.0mm solder wire.
Does the solder wick need cleaning after use?
No. The braid is a no-clean rosin type, so it does not require a post-rework flux cleaning step on the board.
Can I use this to remove capacitors or relays from a PCB?
Yes. TOWOT lists relay removal, component desoldering, re-soldering, and correcting small board errors as intended uses.
Is the desoldering pump safe around static-sensitive chips?
The nozzle is anti-static, heat-resistant nylon and the ABS body is sponge-coated for a non-slip, heat-absorbing grip.
What is the return policy on this kit?
TOWOT states a 30-day return or exchange window. Check the current Amazon listing for the terms that apply to your order.
Key Features
- Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand.
- 3-in-1 Solder Set: Copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5mm; width: 50mm), Suction Pump Size (length: 21cm), Solder Wire(1.0mm,10g).
- High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable.
- Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs.
- Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!
Full Specifications
| Brand | TOWOT |
|---|---|
| Style | 0.04Inch 10g & 0.098Inch 4.9ft & Solder Sucker |
| Weight | 10g |
| Material | sponge |
| Part Number | 2515-RCS1010-SS |
| Package Dimensions | 8.74 x 2.56 x 1.46 inches |
| Batteries Included? | No |
| Batteries Required? | No |
| Item Package Quantity | 1 |
Ready to buy?
TOWOT Solder Wick & Solder Wire & Solder Sucker Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- What Happened to the LLM Training Data Shortage?
- RTX 3060 12GB vs RTX 4070 Super for Local LLMs (2026): Same VRAM, 40% More Bandwidth
- Best SSD for Raspberry Pi Boot (2026): USB SATA vs NVMe
- Best Mouse and Mousepad for FPS in 2026: G502 Hero + SteelSeries QcK
- Best GPU for a Homelab in 2026: AI, VMs & Budget Picks
- Is the RTX 3060 12GB Still Worth It for 1440p Gaming in 2026?
- Local LLM Autocomplete + Agentic Coding on 16GB VRAM
- Can a Raspberry Pi 4 8GB Run a Local LLM in 2026? Real tok/s and What Fits
- Kimi K2.7 Code Is 12x Cheaper Than GPT-5.5 — Run It Local?
- Asus ProArt PA27USD 27-Inch OLED Review: Color Meets Gaming Speed
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- GPU & CPU Upgrade ROI: Cost-per-FPS Calculator Guide
- Best CPU Cooler for AM4 Ryzen Overclocking (2026 Edition)
- Local LLM Benchmarks 2025: AMD Instinct vs Radeon Pro
- Best Sim Racing Wheel for PC and Console in 2026
- Open-WebUI vs LM Studio: Best Local LLM Front-End in 2026
- Ryzen 7 9800X3D vs 7800X3D: The Real-Game FPS Gap at 1080p, 1440p, and 4K
- Cerebras Running GPT-5.4 and GPT-5.5 Internally: What the CFO's Slip Tells Us About Wafer-Scale Inference
- Local LLMs on the Ryzen 5 5600G: llama.cpp CPU Inference Numbers
- Rescue Your Retro PC's Data Before the IDE or SATA Drive Dies
- Best Streaming and Content-Creation Gear in 2026
- Audigy 2 ZS Won't Detect in Win98 SE: A Troubleshooting Decision Tree
- Qwen3.7-Plus Goes Agentic: Cloud Model vs Your Local 12GB Rig
- Athlon 64 + Radeon 9800 Pro Windows XP Build (2026 Revival): CompactFlash-to-IDE Boot Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090