Thermalright TL-8015 CPU Fan
Bottom line: The Thermalright TL-8015 CPU Fan ($7.90 on Amazon as of 2026-11-21 17:29 UTC): 2200RPM max on 4-pin PWM, so the board scales speed to CPU temp; main trade-off: 80mm frame moves far less air than a 120mm or 140mm fan.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ 2200RPM max on 4-pin PWM, so the board scales speed to CPU temp
- ✓ 28.4 CFM airflow rated at only 23.3dBA noise ceiling
- ✓ 15mm-thick 80mm frame clears tight retro cases and low-profile coolers
- ✓ 1.25mm H2O static pressure suits radiators and heatsink fins, not just open airflow
Cons
- ✗ 80mm frame moves far less air than a 120mm or 140mm fan
- ✗ No RGB or ARGB lighting on the gray plastic housing
- ✗ 4-pin PWM header required; 3-pin boards lose speed control
- ✗ Single-fan pack, so multi-intake builds need several orders
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Thermalright TL-8015 CPU Fan, so this read rests on the manufacturer's listed specs and the current price in the retro cpu coolers & fans category (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "2200RPM max on 4-pin PWM, so the board scales speed to CPU temp"; the main trade-off is "80mm frame moves far less air than a 120mm or 140mm fan". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Brand Overview] Thermalright is a Taiwan brand with more than 20 years of development. It has a certain popularity in the domestic and foreign markets and has a pivotal influence in the player market. We have been focusing on the research and development of computer accessories. R & D product lines include: CPU air-cooled radiator, case fan, thermal silicone pad, thermal silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities.
- 【High Performance Cooling Fan】 Automatic speed control of the motherboard through the 4PIN PWM fan cable interface, which can determine the speed according to the temperature of the motherboard, with a maximum speed of 2200RPM.
- 【Dimensions of Silent Fan】 Size: 80*80*15mm, Speed: 2200RPM±10%, Noise ≤23.3dBA Connector: 4pin pwm, wind pressure: 1.25mm H2O,Air Flow: 28.4CFM (MAX), Higher air flow for improved cooling performance.
- 【Quality Bearings】 Carefully developed, solving the problem of shaking fan blades in lifting mode with durability, quality S-FDB V2 bearings keep fan noise to a minimum while providing maximum cooling performance when needed and extending the life of the case fan.
- [Perfect match] The ultra-thin fan can not only be used as a case fan, but also suitable with downward coolers to cooling down CPU jointly aim at maximized heat dissipation performance; Ideal for cases, radiators and CPU coolers.
Full Specifications
| Brand | Thermalright |
|---|---|
| Model | TL-8015 |
| Voltage | 12 Volts (DC) |
| Material | Plastic |
| Unit Count | 1.0 Count |
| Noise Level | 23.3 Decibels |
| Part Number | TL-8015 |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 1 |
| Air Flow Capacity | 28.4 Cubic Feet Per Minute |
| Compatible Devices | Desktop |
| Included Components | CPU FAN |
| Power Connector Type | 4-Pin |
| Maximum Rotational Speed | 2200 RPM |
| Item Dimensions L x W x H | 0.59"L x 3.15"W x 3.15"H |
| Full listing title | Thermalright TL-8015 CPU Fan, High Performance Case Cooler 2200RPM,Low Noise 23.3dBA,4-PIN PWM Cooling Fan(80mm, Gray) |
Benchmark data for other processors
Ready to buy?
Thermalright TL-8015 CPU Fan, High Performance Case Cooler 2200RPM,Low Noise 23.3dBA,4-PIN PWM Cooling Fan(80mm, Gray) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Run Local LLMs on a Ryzen 5 5600G With No GPU (2026)
- Free Retro Game Emulator Online: 2026 Browser Guide
- Raspberry Pi Projects on GitHub: 2025 Guide
- Sound Blaster Audigy FX in a Period-Correct Win98 Gaming Build
- Run Qwen 3.6 27B Locally: What Fits on 12GB in 2026
- Period-Correct Windows XP Gaming PC: 2002-2005 Build Guide for 2026
- Open-WebUI vs LM Studio: Best Local LLM Front-End in 2026
- Noctua-Style Raspberry Pi 5 NAS Build Goes Viral — What Pi 4 Owners Can Borrow
- Add NVMe Boot and Active Cooling to a Raspberry Pi 5 in 2026
- Windows XP Gaming ISO: A Modern Hardware Setup Guide
- Best SATA SSD for a PS4 Slim and Emulation Box in 2026
- Best Mechanical Keyboard for Office Work & Productivity (2026)
- Qwen Plays DCSS: What Roguelike Runs Tell Us About Long-Context Agent Performance
- Open-Source NVK Adds DLSS: What RTX 3060 Owners Get
- Imaging Big-Box CD-ROMs to CompactFlash for a Windows 98 Retro PC
- Best 4K Monitor for the PS4 Pro and PS5 in 2026 (Value Pick)
- Raspberry Pi 5 Price Guide: What You'll Actually Pay
- Samsung Unveils World's First 4K 360Hz QD-OLED Panel
- Self-Host Jellyfin on a Raspberry Pi 4 8GB: Real Transcoding Numbers
- Building a Period-Correct Windows 98 Gaming PC in 2026: Parts, Pitfalls, and Driver Archaeology
- Best PC Game Controllers for 2026: 5 Picks Ranked
- Best Budget PC Gaming Peripherals in 2026: 5 Picks That Punch Above Their Price
- 3D Printed Glow-Spike Bracelet: Adafruit Builder's Guide 2026
- Best 4K Gaming Monitor in 2026: 5 Picks From Budget to Premium
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090