Skip to main content
GuliKit Hall Effect Joystick Replacement Module for Steam Deck Type A&B | No Drift Hall Effect Sticks, Electromagnetic Joystick, Thumb Grip Accessories, No Soldering(Left/Right, 2-Pack, Not Fit OLED)
GuliKit

GuliKit Hall Effect Joystick Replacement Module for Steam Deck Type A&B

Bottom line: The GuliKit Hall Effect Joystick Replacement Module ($29.70 on Amazon as of 2026-10-27 22:19 UTC): 3D Hall Effect sensors read position magnetically, targeting stick drift at the source; main trade-off: not compatible with the Steam Deck OLED.

$29.70 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $29.70 Compare to similar handheld consoles

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For retro and handheld gaming devices, synthesises manufacturer specs and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-10-27. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ 3D Hall Effect sensors read position magnetically, targeting stick drift at the source
  • ✓ No soldering needed: drop-in modules ship with caps included
  • ✓ Keeps the original stick's touch sensing, so touch-based bindings still work
  • ✓ 2-pack replaces both left and right sticks in one order
  • ✓ GuliKit rates it at 50% lower power draw than its previous module version

Cons

  • ✗ Not compatible with the Steam Deck OLED
  • ✗ You must check Controller ID (MEDA/MHDA) first to confirm Type A or B fit
  • ✗ May not return to exact center when no dead zone is set
  • ✗ Still requires opening the Deck to swap modules, even without soldering

Manufacturer description

Stick drift on your Steam Deck doesn't have to mean a repair ticket. The GuliKit Hall Effect Joystick Replacement Module replaces both thumbsticks with GuliKit's patented 3D Hall Effect sensor design. It reads stick position electromagnetically, without the contact pads that wear out in standard sticks. It is built to fix the usual failure symptoms: drift, creeping, stuttering, blind spots, dead zones, a missing click, and sticks that are off-center or loose. The 2-pack covers the left and right sticks and fits Steam Deck Type A and Type B only. It does not fit the OLED model. To check your…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored GuliKit Hall Effect Joystick Replacement Module using a rating × review-volume × price-fit model applied to published specs and reviews across the handheld consoles category. GuliKit's handheld consoles lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for handheld consoles of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will the GuliKit Hall Effect joystick fit my Steam Deck?

It fits Steam Deck Type A and Type B boards but not the Steam Deck OLED. Go to Settings > System > Steam Deck Controller ID. MEDA means Type A and MHDA means Type B.

Do I need to solder anything to install these sticks?

No. The GuliKit modules are no-solder replacements and come with caps, so you swap out the original stick modules directly.

Will the touch-sensing function on my thumbsticks still work?

Yes. GuliKit says the module keeps the touch function of the original Steam Deck stick, so touch-based controls keep working after installation.

How do I calibrate the GuliKit sticks after installing them?

Turn on the Steam Deck and press the small switch on each GuliKit module's board without touching the sticks. Then open the joystick calibration screen and check that both sticks return to 0,0. If a stick is off-center, follow GuliKit's detailed calibration steps.

Why doesn't the stick return to exactly center sometimes?

GuliKit notes that the Hall Effect stick and the original Steam Deck stick differ in precision. In no-dead-zone mode, the stick may not return to exact center every time. Adding a small dead zone or recalibrating usually takes care of it.

Key Features

  • [Universal Stick for Steam Deck] GuliKit new upgraded electromagnetic joystick for Steam Deck. It has been tested to work with Steam Deck Type A and Type B. You can easily select the correct model by using the buttons on the back. [Please click]: ‘Settings → System → Steam Deck Controller ID’, ‘MEDA’ is Type A, ‘MHDA’ is Type B.[Not compatible with OLED version]
  • [No Drift Stick] GuliKit's patented 3D Hall Effect Sensor joystick. Revolutionary electromagnetic stick solves the drifting problem and fix for problems like creeping, stuttering, blind spots, dead zones, no click, non-centered, broken, and loose joysticks.
  • [Hassle-Free Installation] Say goodbye to soldering and time-consuming installation processes. GuliKit joystick comes with caps and also preserve the touch function like your original steam deck stick, making installation a breeze.
  • [About Calibration] Turn on Steam Deck, press tiny switch on the board of gulikit joystick to get it calibrated. Please do not touch them during the process. Go to joystick calibration interface on Steam Deck, calibration is well finished if you see the joysticks return to center position(0,0).If the spot is off-center, please follow the detail steps in our picture.
  • [Warm Tip] Because of the difference in precision between the Steam Deck stick and GuliKit stick, the joystick may not return to center exactly each time under no dead zone mode. Rest assured that will not affect your gaming experience. If you encounter any issues, please reach out to us and we'll reply within 24 hours. Play worry-free!

Full Specifications

BrandGuliKit
ColorUniversal Stick
Power SourceWireless
CompatibilitySwitch
Controller TypeJoystick
Hardware PlatformSteam Deck Type A&B, pc
Compatible DevicesSteam Deck Type A, Steam Deck Type B
Additional FeaturesWireless
Connectivity TechnologyUSB
Compatible Video Game Console ModelsValve Steam Deck
Full listing titleGuliKit Hall Effect Joystick Replacement Module for Steam Deck Type A&B | No Drift Hall Effect Sticks, Electromagnetic Joystick, Thumb Grip Accessories, No Soldering(Left/Right, 2-Pack, Not Fit OLED)

Hardware benchmark data

Ready to buy?

GuliKit Hall Effect Joystick Replacement Module for Steam Deck Type A&B | No Drift Hall Effect Sticks, Electromagnetic Joystick, Thumb Grip Accessories, No Soldering(Left/Right, 2-Pack, Not Fit OLED) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $29.70

*Price sourced from Amazon.com. Last updated 2026-10-27. Price and availability subject to change.

Related Handheld Consoles

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
GuliKit Hall Effect Joystick Replacement Module for Steam Deck Type A&B | No Drift Hall Effect Sticks, Electromagnetic Joystick, Thumb Grip Accessories, No Soldering(Left/Right, 2-Pack, Not Fit OLED)
$29.70
View on Amazon →