Scythe Fuma 3 CPU Air Cooler, Intel LGA1700, LGA1151, AMD AM5/Ryzen 120mm, Dual Tower, Black Top Cover
Bottom line: The Scythe Fuma 3 CPU Air Cooler: Dual-tower design with 6 x 6mm heat pipes and a copper base plate; main trade-off: two towers plus fans occupy far more case volume than a single-tower cooler.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Dual-tower design with 6 x 6mm heat pipes and a copper base plate
- ✓ Two Kaze Flex II fans (25mm + 15mm) counter-rotate for higher static pressure
- ✓ 154mm height clears Mini-ITX boards like the ROG Strix Z690I
- ✓ HPMS V bracket covers LGA1700/1200/115x/2066/2011(V3) plus AM5 and AM4
Cons
- ✗ Two towers plus fans occupy far more case volume than a single-tower cooler
- ✗ Rear RAM clearance of 54mm only applies to LGA2011/2066 layouts
- ✗ Third fan needs a separate purchase; only the clips are included
- ✗ Air cooling this large complicates access to top motherboard headers
Manufacturer description
Two heatsink towers, six 6mm heat pipes, and a copper base plate pull heat off high-TDP chips like the 13900K, 12700K, 10980XE, and Ryzen 3700X without the maintenance overhead of a liquid loop. Scythe pairs two Kaze Flex II fans of different thicknesses (25mm and 15mm) on fluid dynamic bearings, spinning them in opposite directions to raise static pressure while keeping the acoustic profile low. Fan clips for a third fan are in the box. The asymmetrical fin array leaves your front high-profile RAM slot unrestricted, and a cut-out fin design gives 54mm of clearance over the rear slot on…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Scythe Fuma 3 CPU Air Cooler, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Dual-tower design with 6 x 6mm heat pipes and a copper base plate"; the main trade-off is "Two towers plus fans occupy far more case volume than a single-tower cooler". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will the Scythe Fuma 3 fit in a Mini-ITX case?
It stands 154mm tall, which clears most Mini-ITX cases and boards on the market, including the ROG Strix Z690I. Measure your case's stated CPU cooler clearance against 154mm before ordering.
Which CPU sockets does the Fuma 3 support?
The HPMS V mounting system supports Intel LGA1700, LGA1200, LGA115x, LGA2066, and LGA2011(V3), plus AMD AM5 and AM4.
Can it handle a 13900K or other high-TDP processor?
Scythe lists it for high-TDP chips including the 13900K, 12700K, 11900K, 10900K, 10980XE, 9900K, and Ryzen 3700X, using dual heatsinks, six 6mm heat pipes, and a copper base plate.
Will the Fuma 3 block my RAM slots?
The asymmetrical layout leaves the front high-profile RAM slot unrestricted, and the cut-out fin design provides 54mm of clearance over the rear slot on LGA2011/2066 boards.
How many fans come with it, and can I add another?
It ships with two Kaze Flex II 120mm PWM fans on fluid dynamic bearings, one 25mm and one 15mm thick. Extra fan clips are included so you can mount a third fan, sold separately.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- The true successor of the award-winning Fuma 2 Twin Tower Cooler, dual heatsinks and fans accelerate and enhance heat dissipation for top-tier high performance. 6 x 6mm heat pipes and copper base plate ensure heat from CPU and drop temps. Ideal for mainstream, PC gaming rig and workstations with high TDP processor(13900K, 12700K, 11900K, 11700K, 10900K, 10980XE, 9900k, 9700k, 9600k,3700x)
- The Fuma 3 state-of-the-art sturdy radiator structure combines with premium-quality aluminum fin array with higher fin density which increases the surface area of thermal dissipation and maximizes the cooling efficiency during the operations.
- The improved asymmetrical design allows unrestricted use of any front high RAM slot, and the cut-out fin design gives highly clearance(54mm) of the rear RAM slot(LGA2011/2066). Standing only 154mm tall, the cooler fits most Mini ITX motherboards on the market such as ROG Strix Z690I.
- Using Kaze Flex II 120mm quiet fan(Fluid Dynamic Bearing), FUMA3 uses two different thickness(25mm & 15mm) PWM fans rotating in opposite direction. This generates higher static pressure as well as stable airflow thus pushing cooling performance to maximum while keeping silent operation. Addition fan clips is included to add 3rd fan.
- Premium HPMS V provides Fuma 3 with an easy-to-install experience, making installation a breeze and is highly secure for CPU cooler socket INTEL LGA 1700 / LGA1200 / LGA115x / LGA2066 / LGA2011(V3) AMD AM5 / AM4
Full Specifications
| Brand | SCYTHE |
|---|---|
| Model | SCFM-3000 |
| Voltage | 12 Volts |
| Wattage | 2.88 Watt-hours |
| Material | Aluminum, Copper |
| Unit Count | 1.0 Count |
| Noise Level | 14 Decibels |
| Part Number | SCFM-3000 |
| Compatibility | PC |
| Material Type | Aluminum, Copper |
| Cooling Method | Fan |
| Number of Items | 1 |
| Air Flow Capacity | 3000 Cubic Feet Per Minute |
| Compatible Devices | Desktop |
| Power Connector Type | 4-Pin |
| Warranty Description | 2 years |
| Maximum Rotational Speed | 1500 RPM |
| Item Dimensions L x W x H | 8"L x 7"W x 6"H |
Benchmark data for other processors
Ready to buy?
Scythe Fuma 3 CPU Air Cooler, Intel LGA1700, LGA1151, AMD AM5/Ryzen 120mm, Dual Tower, Black Top Cover is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- GPT-5.6 Deleted User Files With Full Disk Access, OpenAI Says It Shouldn't Have
- How to Find and Join Active UT99 and UT2004 Servers in 2026
- Intel Arc Pro B60 24GB: AI Workstation GPU Guide 2025
- Best SSD for a Homelab NAS in 2026: Crucial BX500 vs Samsung 870 EVO vs WD Blue SN550
- CPU Fan Angled Left on a New Prebuilt: Normal or Not?
- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026
- Build a Frigate AI Security-Camera NVR on a Raspberry Pi 4 8GB in 2026
- Build a Self-Updating 24/7 FM Radio Station on a Raspberry Pi Zero W
- DeepSeek Hits the US Entity List: What It Means for Local Inference
- Best 1440p Gaming Monitor for an RTX 3060: ASUS TUF 2K vs KOORUI 4K
- Voodoo 3 3500 TV vs Voodoo 5 5500: Which Late-3dfx Card Should You Hunt For in 2026?
- Best Budget SATA SSD for 2026 Builds
- Best Fight Stick and Pad for Fighting Games on PC (2026)
- Best SSD for Raspberry Pi Boot: USB SATA vs NVMe
- Run a Local LLM on a Raspberry Pi 4 8GB: What Works in 2026
- Horse Riding Game Controller for PC/Mac: Buy or Build
- Best 4K Gaming Monitor for the PS5 Pro and PC in 2026
- Late 2000s Windows XP Gaming PC Build: Parts & Setup Guide
- Voodoo3 3000 PCI vs AGP — Driver Install Troubleshooting in 2026
- Ryzen 9 9950X3D vs Core Ultra 9 285K
- Running local LLMs on the Ryzen 5 5600G iGPU (no dedicated GPU) in 2026
- Qwen Plays DCSS: What Roguelike Runs Tell Us About Long-Context Agent Performance
- Best PC Gaming Controllers in 2026: 5 Picks for Every Budget
- Raspberry Pi AI Kit 2025: Specs, Uses, and Limits
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090