Mount-It Dual Monitor Arm
Bottom line: The Mount-It Dual Monitor Arm ($25.94 on Amazon as of 2026-10-07): Holds two 13-32 in monitors at up to 19.8 lbs each; main trade-off: 19.8 lb per-arm limit rules out heavier 34 in+ ultrawides.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Holds two 13-32 in monitors at up to 19.8 lbs each
- ✓ 17.1 in arm extension plus 360 degree rotation for portrait mode
- ✓ 16 in pole allows independent height and bezel alignment
- ✓ C-clamp fits 0.39-3.3 in desks; grommet base covers 0.39-1.6 in
- ✓ Lifetime warranty with US-based installation support
Cons
- ✗ 19.8 lb per-arm limit rules out heavier 34 in+ ultrawides
- ✗ 32 in screen ceiling excludes larger panels
- ✗ Needs solid wood or single-stud desks, not drywall-only surfaces
- ✗ Cable clips route wires but do not fully enclose them
Manufacturer description
The Mount-It! Dual Monitor Arm clears two screens off your desk and puts them exactly where your eyes want them. The steel desk mount holds two 13-32 inch displays at up to 19.8 lbs each, fitting VESA 75x75mm and 100x100mm patterns on most flat and curved panels. Full-motion articulation gives you +90/-45 degrees of tilt, 180 degrees of swivel, 360 degrees of rotation, and 17.1 inches of arm extension, so you can pull a screen forward for detail work, angle it away from a window to kill glare, or flip one vertical for code and documents. The 16-inch pole lets you slide each monitor up or…
SpecPicks Verdict
SpecPicks scored Mount-It Dual Monitor Arm using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Mount-It!'s accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What size monitors does this Mount-It! arm fit?
It supports two displays from 13 to 32 inches, each weighing up to 19.8 lbs, using VESA 75x75mm or 100x100mm mounting holes. Both flat and curved panels are listed as compatible.
Can I mount my monitors vertically for coding?
Yes. Each arm offers 360 degrees of rotation, so you can turn either screen to portrait orientation, along with 180 degrees of swivel and +90/-45 degrees of tilt.
Will it clamp to my desk?
The C-clamp fits desktops 0.39 to 3.3 inches thick, and the included grommet base fits 0.39 to 1.6 inches. Mount-It! specifies solid wood, concrete, or single-stud surfaces, not drywall-only.
How far can the arms reach across the desk?
Each arm extends up to 17.1 inches, and the 16-inch pole lets you slide monitors up or down to align them side by side.
Is there a warranty on this monitor arm?
Mount-It! lists a lifetime warranty on this steel mount, plus US-based technical specialists for help before, during, and after installation. Check the product listing for current terms.
Key Features
- Maximize your workspace – Raise two monitors off your desk to free up valuable space and create a cleaner, more organized workstation for home, office, or gaming setups.
- Fits your everyday screens – Supports two 13–32 inch displays up to 19.8 lbs each, compatible with VESA 75x75mm and 100x100mm mounting patterns for most flat and curved monitors.
- Full motion flexibility – Achieve perfect screen positioning with +90°/-45° tilt, 180° swivel, 360° rotation, and 17.1” arm extension. Work comfortably, reduce glare, and improve posture.
- Height adjustment made easy – Slide monitors along the 16” pole and fine-tune alignment for seamless side-by-side viewing. Ideal for dual setups in offices or creative studios.
- Built strong for daily use – Heavy-duty steel construction provides stable, long-lasting support. Integrated cable clips keep wires neat for a polished, professional look.
- Fits most desks – Choose between a C-clamp (0.39"–3.3" thick desktops) or grommet base (0.39"–1.6"). Designed for single-stud or solid wood/concrete surfaces (not drywall-only).
Full Specifications
| Brand | Mount-It! |
|---|---|
| Color | Black |
| Material | Metal |
| Model Number | MI-2752 |
| Mounting Type | Desk Mount (Clamp or Grommet) |
| Movement Type | Full Motion, Swivel, Tilt, Height Adjustable |
| Mfr Part Number | MI-4752 |
| Number of Packs | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Metal |
| Maximum Tilt Angle | 45 Degrees |
| Warranty Description | Limited Lifetime Warranty |
| Maximum-Supported Screen Size | 32 Inches |
| Minimum-Supported Screen Size | 32 Inches |
| Global Trade Identification Number | 00810041738172 |
| Full listing title | Mount-It Dual Monitor Arm, Desk Mount for 2 Screens 13-32 in, Steel | Holds up to 19.8 lbs Each, Full Motion Tilt Swivel Rotate, VESA 75x75 100x100, Cable Management, C-Clamp or Grommet, Black |
Ready to buy?
Mount-It Dual Monitor Arm, Desk Mount for 2 Screens 13-32 in, Steel | Holds up to 19.8 lbs Each, Full Motion Tilt Swivel Rotate, VESA 75x75 100x100, Cable Management, C-Clamp or Grommet, Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best AM4 CPU for Gaming in 2026: 5 Ranked Picks
- Top 20 Most Played Steam Deck Games: April 2026
- 8BitDo Pro 2 vs DualSense for PC Emulation: Which Controller Wins
- Raspberry Pi 4 8GB vs Ryzen 5 2600 for Gemma 3 4B: Which Cheap Box Wins?
- Ollama vs llama.cpp vs vLLM — which local LLM runtime wins in 2026?
- Best Budget SSD for PS5 and Steam Download Cache in 2026
- Qwen3.6-35B-A3B vs Gemma4-26B-A4B: Which MoE Fits a 12GB RTX 3060
- Beijing's $295B AI Buildout Wants 80% Domestic Chips — What It Means for GPU Buyers
- A New Benchmark Says AI Fails at Real Knowledge Work — Does a Bigger Local Rig Help?
- Qwen 3.6 27B at 2x tok/s: Luce DFlash on One RTX 3090
- Best Gaming Headset for PlayStation 5 Under $80 (2026)
- Best GPU for Local LLMs Under $350: Why the RTX 3060 12GB Still Wins
- Raspberry Pi 4 8GB as a Local LLM Box: What Models Actually Run?
- Best Controller for Retro Emulation on PC: 8BitDo Pro 2 vs GameSir G7 SE
- Best Budget PC Upgrades for 1440p Gaming in 2026
- Raspberry Pi 4 8GB vs Pi 5 for a 2026 Homelab: Is the Pi 4 Still Worth It?
- Crucial BX500 vs Samsung 870 EVO: Best 1TB SATA SSD for Game Storage
- Intel Arc B580 LLM Inference: 12GB Battlemage Benchmarks
- Best Streaming Setup Gear for Beginners in 2026
- CompactFlash as a Win98 Boot Drive: Transcend CF133 + IDE Adapter Walkthrough
- Legion Go vs Steam Deck vs ROG Ally: 2026 Buying Guide
- NVIDIA H200 vs B200 for LLM Inference: What Changes in 2026
- ASUS ROG Crosshair 2006 X870E: A Retro-Styled AM5 Mobo for ROG's 20th Anniversary
- Forza Horizon 6 on the RTX 3060 12GB: 1080p and 1440p Settings Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090