Lexar E32C 128GB Type-C USB Flash Drive
Bottom line: The Lexar E32C 128GB Type-C USB Flash Drive: True dual connector: USB-C and USB-A on one body, no OTG adapter needed; main trade-off: only a read speed is published; Lexar does not spec write speed here.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ True dual connector: USB-C and USB-A on one body, no OTG adapter needed
- ✓ USB 3.2 Gen 1 on both ends, rated up to 100MB/s read
- ✓ Swivel design protects both connectors without a separate cap to lose
- ✓ 128GB holds a typical Android camera roll plus documents
Cons
- ✗ Only a read speed is published; Lexar does not spec write speed here
- ✗ 100MB/s read is modest next to USB 3.2 Gen 2 drives
- ✗ Falls back to host speed on USB 2.0 ports, so older PCs stay slow
- ✗ Swivel hinges are a wear point over years of daily flipping
Manufacturer description
The Lexar E32C 128GB dual drive solves the phone-to-laptop transfer problem with one stick: a USB-C end for your Android smartphone or tablet, and a USB-A end for any laptop, desktop, or PC that still uses standard ports. Both sides run USB 3.2 Gen 1, rated at up to 100MB/s read, so a folder of 4K clips or a photo library moves off your device in a fraction of the time a USB 2.0 thumb drive would take. The 128GB capacity gives you room for roughly a phone's worth of camera roll plus documents, and the swivel housing rotates the connectors under a solid cap, so there is no loose cover to lose…
SpecPicks Verdict
SpecPicks scored Lexar E32C 128GB Type-C USB Flash Drive using a rating × review-volume × price-fit model applied to published specs and reviews across the external storage category. Lexar's external storage lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for external storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this work with my Android phone without an adapter?
Yes. The E32C has a native USB-C connector on one end for Android smartphones and tablets with USB-C, and a USB-A connector on the other for laptops and PCs. No OTG adapter is required for either side.
How fast is the Lexar E32C?
It uses USB 3.2 Gen 1 and is rated at up to 100MB/s read. Lexar does not publish a write speed for this model, so check the product listing for current specifications.
Does it work in older USB 2.0 and USB 3.0 ports?
Yes, the USB-A end is backward compatible with USB 3.0 and USB 2.0. The drive will run at whatever speed the older port supports rather than the full 3.2 Gen 1 rate.
How much can 128GB actually hold?
128GB is enough for a typical Android camera roll of photos and 4K video clips plus documents. Actual counts vary with resolution, bitrate, and file format.
Full Specifications
| Brand | Lexar |
|---|---|
| Model Name | E32C |
| Read Speed | 100 megabytes_per_second |
| Write Speed | 30 megabytes_per_second |
| Connectivity | USB-C |
| Model Number | LJDE32C128G-BNQEU |
| Compatibility | PC, Android |
| Mfr Part Number | LJDE32C128G-BNQEU |
| Special Feature | Lightweight |
| Flash Memory Type | USB |
| Compatible Devices | Laptop, Mobile, Tablet |
| Hardware Interface | USB 3.2 Gen 1 |
| Additional Features | Lightweight |
| Warranty Description | 2-year manufacturer warranty |
| Connectivity Technology | USB |
| Memory Storage Capacity | 128 GB |
| Item Dimensions D x W x H | 1.59"D x 0.28"W x 0.48"H |
| Hardware Connectivity Technology | USB Type C |
| Full listing title | Lexar E32C 128GB Type-C USB Flash Drive, USB-A&USB-C 3.2 Gen 1 Dual Drive OTG 100MB/s Read, Thumb Drive Swivel Design Jump Drive for USB 3.0/2.0, Memory Stick for Android Smartphone, Laptop, PC |
Ready to buy?
Lexar E32C 128GB Type-C USB Flash Drive, USB-A&USB-C 3.2 Gen 1 Dual Drive OTG 100MB/s Read, Thumb Drive Swivel Design Jump Drive for USB 3.0/2.0, Memory Stick for Android Smartphone, Laptop, PC is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related External Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Why NVIDIA Killed 3dfx: How the Voodoo Brand Still Haunts Modern GPU Launches
- Build a Budget Local-AI Rig in 2026: Ryzen 7 5800X + RTX 3060 12GB
- Best Webcam and Mic Setup for Streaming Under $300 (2026)
- Best Gaming Monitor for Console + PC Dual Setup in 2026
- Dump and Archive Your Retro PC's IDE Drives in 2026: A USB Adapter Workflow
- DeepSeek V4 Flash on a 12GB RTX 3060: The Cheapest Agentic Model, Run Local
- Aider vs Cline vs Cursor for Local + Cloud Coding in 2026
- RTX 5090 vs RTX 4090 — is the Blackwell upgrade worth it?
- Best Sim Racing Wheel Under $300 in 2026: Force Feedback That's Worth It
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: What It Can Really Do
- AI Coding Agents Find the Right File but Miss the Lines — What Local Code Models on a 12GB GPU Get Wrong
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
- MSI RTX 3060 Ventus 2X vs ZOTAC RTX 3060 Twin Edge: Which $300 1080p GPU Wins in 2026?
- Intel Arc Pro B60 Gaming Guide: 24GB Battlemage in 2026
- Best SATA SSD for Gaming and Console Upgrades in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Game Streaming in 2026
- Best Budget 1080p Gaming PC Parts in 2026: 5 Picks
- AOOSTAR MACO 6850H as a Proxmox 9 Home Server
- Mistral Seeks €3B: What a Bigger European Lab Means for Local Rigs
- Self-Host Jellyfin and Home Assistant on a Raspberry Pi 4 8GB in 2026
- Jensen Huang Heads to Tokyo as Sega's 1996 Bet on Nvidia Is Remembered
- 3D Printed Glow-Spike Bracelet: Adafruit Builder's Guide 2026
- Best Gear for Online D&D and Virtual Tabletop Nights in 2026
- Best AI HATs for Raspberry Pi 5 in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090