ALINNA
GRLRCR 24 Pin to 18 Pin ATX PSU Power Adapter Cable for HP Z230/Z420/Z620 Motherboards 12inch/30cm 1007-18AWG
Bottom line: The ALINNA GRLRCR 24 Pin to 18 Pin ATX PSU Power Adapter Cable is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category, priced around $7.99 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Technical Specifications: Material is 1007-18AWG with maximum power capacity of 1000 watts
- ✓ Backed by ALINNA's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Specification:Connectors: 1 x 24 pin port, 1 x 18 pin port.Wire gauge: 1007-18AWG, standard tinned copper wire.Length: 30cm/11.8inches.Maximum power: 1000W.24-pin to 18-pin ATX cable with the 24-pin end plugged into a standard 24-pin ATX power supply and the 18-pin end plugged into the motherboard.Solution: This cable converts a standard 24-pin ATX power supply to an 18-pin motherboard power connector, providing a convenient and fast conversion connection solution.Allowing you to convert standard 24 pin ATX power supply to 18 pin HP motherboard power supply connector.Note: This cable is only…
SpecPicks Verdict
SpecPicks scored ALINNA GRLRCR 24 Pin to 18 Pin ATX PSU Power Adapter Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. ALINNA's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Adapter Cable Design: 24-pin to 18-pin ATX cable with the 24-pin end plugged into a standard 24-pin ATX power supply and the 18-pin end plugged into the motherboard
- Convenient Conversion Solution: This cable converts a standard 24-pin ATX power supply to an 18-pin motherboard power connector, providing a convenient and fast conversion connection solution
- System Compatibility: Compatible with computer Z220, Z230, Z420, Z620 system with 18-pin power connector for motherboard
- Technical Specifications: Material is 1007-18AWG with maximum power capacity of 1000 watts
- Important Compatibility Warning: This cable is only compatible with computer Z220, Z230, Z420, Z620 systems with 18-pin power connector on the motherboard, but do not support Z210, incorrect use or installation will burn or damage the motherboard, please check your computer model carefully and do not exceed the maximum power of 1000w when using the ATX cable
- Cable Length: Measures 30cm or 11.8 inches in length for flexible installation and routing
Full Specifications
| Brand | ALINNA |
|---|---|
| Model | ALC-2418 |
| Material | Copper |
| Cable Type | ATX |
| Unit Count | 1 Count |
| Part Number | ALC-2418 |
| Cable Length | Measures 30cm or 11.8 inches in length for flexible installation and routing |
| Material Type | Copper |
| Wire Diameter | 1.02 millimeters |
| Connector Type | 24 Pin Atx |
| Item Dimensions | 4.5 x 3.7 x 0.3 inches |
| Number of Items | 1 |
| Number of Packs | 1 |
| Package Contents | Includes 1 x 24 Pin to 18 Pin ATX Power Cable |
| Included Components | 1007-18AWG |
| Adapter Cable Design | 24-pin to 18-pin ATX cable with the 24-pin end plugged into a standard 24-pin ATX power supply and the 18-pin end plugged into the motherboard |
| System Compatibility | Compatible with computer Z220, Z230, Z420, Z620 system with 18-pin power connector for motherboard |
| Technical Specifications | Material is 1007-18AWG with maximum power capacity of 1000 watts |
| Item dimensions L x W x H | 4.5 x 3.7 x 0.3 inches |
| Recommended Uses For Product | Outdoor, Indoor. |
Ready to buy?
GRLRCR 24 Pin to 18 Pin ATX PSU Power Adapter Cable for HP Z230/Z420/Z620 Motherboards 12inch/30cm 1007-18AWG is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026: Setup and Real Transcode Limits
- 3dfx Voodoo5 5500 AGP Install Guide: Glide, 4-Sample FSAA, and the Last Great 3dfx Driver Stack for Win98SE
- GeForce 4 Ti 4600 AGP in a Windows XP Build: Drivers, Gotchas and Benchmarks
- CRT vs LCD for Retro Gaming: Which Wins in 2026?
- Grok Imagine Video 1.5 Is #2 — What GPU Runs Local Video Gen?
- Gemma 4 12B Fits Multimodal AI Into 16GB of RAM
- Best 4K Monitor for PS5 and Xbox Series X Console Gaming in 2026
- DeepSeek V4 vs Claude Opus 4.6: Local Inference Hardware for the Open-Weight Challenger
- Ryzen 5 2600 vs Ryzen 5 5600G for CPU-Only Llama 3.2 3B in 2026
- Putting a Modern SATA SSD in a Win98/XP Retro Build via an IDE Bridge
- Intel Arc AI Inference: 2025 Performance & Setup Guide
- Local Whisper for Stream VODs: What Mic and GPU You Actually Need
- CompactFlash as an IDE Boot Drive for Your Win98 Retro PC in 2026
- Best SATA SSD in 2026: Crucial BX500 vs Samsung 870 EVO vs WD Blue vs SanDisk
- Intel Arc Pro B60 Review 2025: Xe2 Workstation GPU Guide
- Raspberry Pi 5 16GB for Local LLMs: What Models Actually Fit?
- MSI RTX 3060 Ventus 2X vs ZOTAC RTX 3060 Twin Edge: Which $300 1080p GPU Wins in 2026?
- MacBook Neo Benchmarks 2026: Apple Silicon vs AMD
- Best NVMe SSD for Local AI Model Storage in 2026
- How to run Llama 3.1 70B on AMD Radeon RX 7900 XTX
- Home Assistant Air Quality Monitor: 2025 Setup Guide
- vLLM on Windows in 2026: What Actually Works on a 12GB Card
- Noctua NH-U12S vs DeepCool AK620 on Ryzen in 2026: Honest Pick
- CompactFlash as an IDE Hard Drive: Silent, Solid-State Storage for Win98 & DOS Builds
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090