MOUNTUP Triple Monitor Mount Fits Max 32 Inch Screen (75x75/100x100)
Bottom line: The MOUNTUP Triple Monitor Mount Fits Max 32 Inch Screen ($61.19 on Amazon as of 2026-10-07): Holds three 32-inch monitors on one 28-inch pole, up to 36.3 inches of height; main trade-off: 17.6 lb per-arm ceiling rules out heavier 32-inch VA and mini-LED panels.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Holds three 32-inch monitors on one 28-inch pole, up to 36.3 inches of height
- ✓ Each arm supports 4.4-17.6 lbs and fits both 75x75 and 100x100 VESA patterns
- ✓ Full motion per screen: 90-degree tilt, 180-degree swivel, 360-degree rotation
- ✓ Arms extend 20.5 inches forward, so you can push screens back off the desk
- ✓ C-clamp and grommet kits both included for desks 0.39-3.15 inches thick
Cons
- ✗ 17.6 lb per-arm ceiling rules out heavier 32-inch VA and mini-LED panels
- ✗ 32-inch screen cap means no ultrawide or 34-inch center display
- ✗ Grommet install needs an existing hole between 0.39 and 1.97 inches
- ✗ Three-arm assembly and cable routing take longer than a single-monitor arm
SpecPicks Verdict
SpecPicks scored MOUNTUP Triple Monitor Mount Fits Max 32 Inch Screen using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. MOUNTUP's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Universal Monitor Desk Mount-Hold up to triple 32" monitors. Each arm can hold 4.4 Ibs-17.6 Ibs /2kg-8kg monitor with 75mm x75mm or 100mm x 100mm VESA mounting holes.
- Friendly Height Design-Triple monitor mount for desk has a 28 inch pole and the maximum height can be raised to 36.3 inches. The monitor arm can also extend up to 20.5 inches to the front.
- Customize Your Screen Angle-This full motion triple monitor stand allows your monitor 90° tilt, 180° swivel and 360° rotation to find an optimal view angle to meet your demands.
- Space Saving- 3 monitor installation with cable management hides arm wires and frees up more desktop space to accommodate two monitor arms. Enjoy your work, gaming or viewing time in a more comfortable environment!
- Two Installation Options-We provide both C-clamp and grommet kits. The C-clamp and grommet base allow for 0.39 to 3.15 inches thick. The dimensions of the hole range from 0.39 inches to 1.97 inches.
Full Specifications
| Brand | MOUNTUP |
|---|---|
| Color | Black |
| Weight | 2kg |
| Material | Alloy Steel |
| Unit Count | 1 Count |
| Mounting Type | Clamp/Grommet |
| Movement Type | Rotate, Tilt, Articulating |
| Mfr Part Number | MU6013A |
| Number of Items | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Alloy Steel |
| Maximum Tilt Angle | 90 degrees |
| Maximum-Supported Screen Size | 32 inches |
| Minimum-Supported Screen Size | 13 inches |
| Full listing title | MOUNTUP Triple Monitor Mount Fits Max 32 Inch Screen, Holds 4.4-17.6lbs, 3 Monitors Desk Mount, Triple Monitor Stand for Desk, Adjutable Arm with Clamp/Grommet Base, for Home Office, 75x75/100x100 |
Ready to buy?
MOUNTUP Triple Monitor Mount Fits Max 32 Inch Screen, Holds 4.4-17.6lbs, 3 Monitors Desk Mount, Triple Monitor Stand for Desk, Adjutable Arm with Clamp/Grommet Base, for Home Office, 75x75/100x100 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Qwen-Image vs ERNIE vs FLUX.2 Dev: RTX 5090 Style Test
- GeForce 6800 Ultra AGP Install Guide: Drivers, Benchmarks, and the Last Great AGP Card
- Best USB Microphone for Streaming in 2026: QuadCast 2 vs Yeti
- Build a Pi Zero W Handheld Retro Emulator in 2026: Full Parts List and Setup
- Intel Arc Pro B60 24GB vs RTX 3060 12GB: the VRAM math
- AMD Ryzen 7 9800X3D Bundle: DDR5 + MSI B850 Wi-Fi 7 Guide
- Build a Self-Updating 24/7 FM Radio Station on a Raspberry Pi Zero W
- Best Noctua and Quiet-Tier CPU Coolers in 2026
- Build a Raspberry Pi 4 AirPlay Receiver in 2026: Full Walkthrough
- Best SATA SSD to Revive an Old Laptop: Crucial BX500 vs Samsung 870 EVO
- $100 CPU Shootout: Ryzen 5 5500 vs Core i3-14100F vs i3-12100F
- Asus ROG Xreal R1: 240Hz AR gaming glasses land
- RTX 5090 vs RX 9070 XT: Specs, Gaming & AI Compared
- Best Plug-and-Play Retro Console and Handheld to Buy in 2026: 5 Ranked Picks
- First-Time Steam Deck Emulation Setup: A Complete Guide
- Best Steam Deck Accessories in 2026: Docks, Audio, Controllers, and Storage
- Period-Correct 1999 Voodoo3 + Pentium III LAN Party Build Guide
- 1-Trillion-Param LLM on 768GB of Optane vs a 12GB RTX 3060: What's Practical
- Best Gaming Monitor for 1440p Under $400 (2026)
- Best Sim Racing Wheel and Shifter for Beginners in 2026
- Period-Correct Windows XP Gaming PC: 2002-2005 Build Guide for 2026
- Build a Silent Raspberry Pi 5 NAS with NVMe and Active Cooling in 2026
- IPEX-LLM + Ollama on Intel Arc: Setup, tok/s, and the RTX 3060 Reality Check
- Sound BlasterX G6 on a Windows 98/XP Retro Gaming PC: What It Actually Does
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090