![[20W 5V 4A] Raspberry Pi 4 Case, with iUniker 20W 5V 4A USB C Raspberry Pi 4 Power Supply with Switch Heatsink 40mm Cooling Fan for Pi 4 4 8gb/4gb/2gb](https://m.media-amazon.com/images/I/61isgudgHHS._AC_SL1500_.jpg)
SAFFUN
SAFFUN 2 Pack Wireless USB SNES Controller for Switch 1/2
Bottom line: The SAFFUN 2 Pack Wireless USB SNES Controller for Switch 1/2 ($39.99 on Amazon as of 2026-10-21 16:13 UTC): 2.4 GHz USB receiver gives plug-and-play wireless out to 10m (33 ft); main trade-off: 2.4 GHz dongle only - no Bluetooth, so a free USB port is required.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 2.4 GHz USB receiver gives plug-and-play wireless out to 10m (33 ft)
- ✓ One pad covers Switch, Switch OLED, PC, Mac, Android, Steam Deck, and Raspberry Pi
- ✓ Up to 10 hours of play per charge, with a full recharge in 2.5 hours
- ✓ Built-in screenshot button captures gameplay without extra mapping
Cons
- ✗ 2.4 GHz dongle only - no Bluetooth, so a free USB port is required
- ✗ Small 420mAh cell needs recharging sooner than larger modern gamepads
- ✗ Classic SNES layout has no analog sticks, limiting 3D and modern titles
- ✗ Tiny USB receiver is easy to misplace with no Bluetooth fallback
SpecPicks Verdict
SpecPicks scored SAFFUN 2 Pack Wireless USB SNES Controller for Switch 1/2 using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. SAFFUN's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- USB Wireless SNES Controller-fully compatible with Switch & Switch 2. Great for retro emulators on Windows PC, macOS, Linux and Raspberry Pi.
- 2.4GHz Wireless: Stable 10m(33ft) range with zero-lag performance
- Plug & Play: Standard USB receiver; no drivers needed for compatible devices
- Responsive Controls: High-sensitivity buttons for precise retro gaming
- Built-in rechargeable battery, 10-hour runtime
- Screenshot Capture: Built-in button for in-game screenshots (Switch only)
Full Specifications
| Brand | SAFFUN |
|---|---|
| Color | Switch-Compatible Purple |
| Model Name | SNES |
| Plug & Play | Standard USB receiver; no drivers needed for compatible devices |
| Connectivity | Wireless, USB, 2.4GHz |
| Model Number | SAFFUN |
| Power Source | Battery Powered |
| Compatibility | PC, Switch, SNES, Android, Mac, Linux |
| 2.4GHz Wireless | Stable 10m(33ft) range with zero-lag performance |
| Button Quantity | 1 |
| Connection Type | Wireless |
| Controller Type | Wireless |
| Item Dimensions | 8 x 6 x 0.72 inches |
| Hardware Platform | Laptop, Nintendo Switch, Nintendo Switch 2, Raspberry Pi, Windows PC, macOS |
| Incompatible with | Android TV Box, Fire TV, Chromebook, SteamOS, Tesla, C64 |
| What's in the box | Wireless Controllers, USB receivers, Charging Cables, User manual |
| Compatible Devices | Nintendo Switch, Nintendo Switch 2, Raspberry Pi, Windows PC, macOS |
| Screenshot Capture | Built-in button for in-game screenshots (Switch only) |
| Additional Features | Ergonomic, Multiuse, Wireless |
| Responsive Controls | High-sensitivity buttons for precise retro gaming |
| Full listing title | 2 Pack Wireless USB SNES Controller for Switch 1/2, Windows PC, Mac(Purple) | (Rechargeable), (Plug & Play), (Ultra-Low Latency 2.4GHz Receiver), Compatible with Switch Online / Switch OLED, Raspberry Pi |
Ready to buy?
2 Pack Wireless USB SNES Controller for Switch 1/2, Windows PC, Mac(Purple) | (Rechargeable), (Plug & Play), (Ultra-Low Latency 2.4GHz Receiver), Compatible with Switch Online / Switch OLED, Raspberry Pi is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Single Board Computers
2 Pack Wireless USB SNES Controller for Switch 1/2 head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc Pro B70 vs RTX 3060 12GB for Local LLMs
- Best GPU for AI Workstations in 2026
- Sound Blaster Audigy 2 ZS in 2026: The Last Great Win98/XP Sound Card Install Guide
- Ryzen 5 5600G vs Core i7-9700K for 1080p Gaming
- Best AMD Ryzen 5000 CPU for Gaming in 2026: 5 Picks
- Best CPU Cooler for Ryzen 7 5800X Overclocking (2026)
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
- Building a DualSense PC Adapter with a Raspberry Pi for $20 (2026)
- 768GB Optane vs RTX 3060 12GB: The Trillion-Param LLM Reality
- Qwen3.6 35B on a Single RTX 3060 12GB: What Actually Fits
- Replace a Dying IDE Drive With CompactFlash in a Win98 Retro PC
- Best Storage for a Windows 98 Retro PC: CompactFlash vs IDE-to-USB SSD Adapters
- First Homelab Setup: Hardware, Security & Networking Guide
- Intel Core Ultra 5 250K Plus Takes On the Ryzen 5 7600X3D for Mid-Range Gaming
- NVK Open-Source Vulkan Driver Gains Experimental DLSS on Linux
- Building a Period-Correct 1998 Voodoo2 SLI Rig (and Imaging Its Boot Drive)
- Step 3.7 Flash Benchmarks: What You Can Actually Run on 12GB
- Sega Genesis Games Loaded Off a Vinyl Record — and What It Means for Retro Collectors
- Best Raspberry Pi 5 Projects and Kits for 2026
- Best SSD for PS5 Console Storage Expansion in 2026
- Best Local LLM for Coding Agents on a 24GB GPU (Late 2026)
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- Build a Local Voice Assistant on a Raspberry Pi 4 8GB in 2026: Full BOM and Real Limits
- Dual GPU Llama.cpp Speedup: What Actually Helps
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090