Teyleten Robot Dual-axis XY Joystick Module PS2 Game Joystick Control Lever Sensor Game Controller Sensor Board Module KY-023 for Arduino Raspberry (5pcs)
Bottom line: The Teyleten Robot Dual-axis XY Joystick Module PS2 Game Joystick Control: Five KY-023 modules per pack, enough for multi-axis or multiplayer builds; main trade-off: analog outputs need an external ADC to read on a Raspberry Pi.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Five KY-023 modules per pack, enough for multi-axis or multiplayer builds
- ✓ Dual-axis XY stick built on two 10K potentiometers for analog position
- ✓ Full 0-5V readout range per axis, resting near 2.5V at center
- ✓ Standard 2.54mm pin interface fits breadboards and jumper wires
- ✓ Metal PS2-style joystick lever for a familiar thumbstick feel
Cons
- ✗ Analog outputs need an external ADC to read on a Raspberry Pi
- ✗ Listing specifies 5V supply only; 3.3V behavior is not documented
- ✗ Center voltage is only about 2.5V, so plan to calibrate a dead zone in code
- ✗ Bare sensor board with no enclosure; you must build your own housing
Manufacturer description
The cross rocker is a bi-directional 10K resistor, as the rocker direction is different, the resistance value of the taps change with it. This module uses 5V power supply, the original state of the X,Y readout voltage is about 2.5V, when pressed with the direction of the arrow, the readout voltage value increases, the maximum to 5V; the arrow in the opposite direction, the readout voltage value decreases, the minimum is 0V.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Teyleten Robot Dual-axis XY Joystick Module PS2 Game Joystick…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro consoles category before committing. On the listing's own facts, the case for it is "Five KY-023 modules per pack, enough for multi-axis or multiplayer builds"; the main trade-off is "Analog outputs need an external ADC to read on a Raspberry Pi". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- PS2 joystick Game joystick module Electronic building blocks standard interface and 2.54mm pin Interface lead, metal joystick.
Full Specifications
| Brand | Teyleten Robot |
|---|---|
| CPU Model | Core i7 |
| Model Name | KY-023 |
| Built-In Media | 5 x Teyleten Robot Dual-axis XY Joystick Module |
| Processor Brand | Intel |
| Processor Count | 1 |
| Total Usb Ports | 2 |
| Compatible Devices | Arduino, Raspberry Pi |
| Included Components | 5 x Teyleten Robot Dual-axis XY Joystick Module |
| RAM Memory Technology | LPDDR4 |
| Connectivity Technology | PS2 |
Ready to buy?
Teyleten Robot Dual-axis XY Joystick Module PS2 Game Joystick Control Lever Sensor Game Controller Sensor Board Module KY-023 for Arduino Raspberry (5pcs) is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Consoles
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Raspberry Pi Alternative for Emulation (2025)
- Best Budget Streaming Setup for Beginners in 2026
- Best Budget Gaming Monitor in 2026: 5 Picks From 1440p to 4K
- RX 9070 XT vs RTX 3060 12GB for Local LLMs
- Grok Imagine Video 1.5 Hits #2 — But Local Video Gen on an RTX 3060 Is Still Free
- AMD RX 9070 XT Hits All-Time-Low $629 in Amazon Lightning Sale
- Build a Silent Windows 98 Boot Drive with CompactFlash + IDE
- 9800X3D + RTX 5070 Ti PC Build 2026: 1440p High-Refresh
- Best Streaming Starter Kit for New Creators in 2026
- AI-Driven Sound Blaster Driver Install on WinXP via Vision LLM
- Best SATA SSD for Gaming and Everyday Upgrades in 2026
- Raspberry Pi 4 8GB in 2026: Still the Best Home-Lab SBC for Under $80
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best 27-Inch Gaming Monitor?
- Google's 'Frozen v2' Chip Bakes Gemini Into Silicon: What It Means for Local Rigs
- RTX 3060 12GB vs RX 7600 XT for Local LLMs: The Cheap Inference Card to Buy in 2026
- Qwen 3.6 27B vs Gemma 4 31B Local Inference: VRAM, Tok/s, and Quality Across Quantizations
- How to Find and Join Active Retro Multiplayer Servers in 2026 (Quake 3, UT99, CS 1.6, Diablo II)
- Best Raspberry Pi 4 Starter Kit Bundle for First-Time Robotics Builders in 2026
- Can a Raspberry Pi 4 8GB Run a Local LLM in 2026? Realistic tok/s
- Best Budget SSD for Gaming and Boot Drives in 2026
- Open WebUI on a Raspberry Pi 4: A Self-Hosted LLM Front-End That Sips Power
- Black Friday KVM Switch Deals: 5 Picks for Two-PC Desks
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe
- RTX 3060 12GB vs RTX 4060 Ti 16GB for Qwen2.5-Coder 14B (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090