MECCANIXITY IDC 14Pin Flat Ribbon Cable
Bottom line: The MECCANIXITY IDC 14Pin Flat Ribbon Cable is a specs-and-price decision rather than a crowd-consensus one in the retro cases & modding category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Easy to install, just plug directly into the PCB.
- ✓ Backed by MECCANIXITY's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
What is this?Flat ribbon cable is most suitable for data transmission between moving parts and the motherboard, and between board-to-board. It is widely used in the connection between the print heads of various printers, and the signal transmission of scanners, copiers, audio, LCD appliances, various DVD players, etc.What will I get?Connector Type: FC to FCPitch: 2.0mmPin Number: 14Cable Length: 30cm/11.8 inchCable Width: 14mm/0.55 inchIn the package of:2pcs x Flat Ribbon CableAre there any advantages of the product?The flat ribbon cable has a flat and compact profile, allowing it to be…
SpecPicks Verdict
SpecPicks scored MECCANIXITY IDC 14Pin Flat Ribbon Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cases & modding category. MECCANIXITY's retro cases & modding lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cases & modding of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Flat ribbon cable is most suitable for data transmission between moving parts and the motherboard, and between board-to-board. It is widely used in the connection between the print heads of various printers, and the signal transmission of scanners, copiers, audio, LCD appliances, various DVD players, etc.
- Connector Type: FC to FC; Pitch: 2.0mm; Pin Number: 14; Cable Length: 30cm/11.8 inch; Cable Width: 14mm/0.55 inch
- The flat ribbon cable has a flat and compact profile, allowing it to be routed in narrow spaces or tight corners more easily than round cables. The ribbon cable minimizes crosstalk and interference between adjacent conductors, ensuring reliable signal transmission.
- Easy to install, just plug directly into the PCB.
- Ensure that the cable is aligned correctly with the connectors. Reversing the orientation could result in improper connections or signal transmission issues.
Full Specifications
| Brand | MECCANIXITY |
|---|---|
| Color | Grey |
| Model | IDC 14Pin |
| Cable Type | Flat Ribbon Cable |
| Item Shape | Flat |
| Unit Count | 2.0 Count |
| Part Number | mea231031ee000021 |
| Connector Type | Fc to Fc |
| Number of Pins | 14 |
| Connector Gender | Female-to-Female |
| Compatible Devices | DVD Player, Personal Computer, Printer, Scanner |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Recommended Uses For Product | Connecting printers, scanners, DVD players, and computers |
| Full listing title | MECCANIXITY IDC 14Pin Flat Ribbon Cable, 2.0mm Pitch FC to FC Connector 30cm Length Grey Jumper Wire for Computer LED Display DVD, 2Pcs |
Ready to buy?
MECCANIXITY IDC 14Pin Flat Ribbon Cable, 2.0mm Pitch FC to FC Connector 30cm Length Grey Jumper Wire for Computer LED Display DVD, 2Pcs is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Is the Ryzen 7 7800X3D Worth It in 2026?
- Claude Opus 4.8 Tops the Intelligence Index — How Close Can a $300 RTX 3060 Get Locally?
- Build a Raspberry Pi 4 NAS in 2026: Best SATA SSD Setup Over USB 3.0
- Budget 4K QD-Mini LED Gaming Monitors Hit New Lows in 2026
- Unified RAM for LLMs: 2025-2026 Hardware Guide
- This Retro Switch 2 Dock Looks Exactly Like an N64 — and Holds Six Cards
- Best 1440p 240Hz Gaming Monitors in 2026
- DeepSeek Seeks More Cash Weeks After $7B Round
- LattePanda Sigma Review (2026): The x86 SBC That Breaks the Pi Pattern
- RTX 3060 12GB vs RTX 5060: Best Value for 1080p Gaming + Local AI
- Ryzen 5 2600 vs Ryzen 5 5600X for CPU-Only gpt-oss 20B (2026)
- Best Gaming Headset Under $50 for Console + PC (2026)
- Noctua NH-U12S vs NZXT Kraken M22 in a Mini-ITX Ryzen 7 5800X Build
- Run a Local LLM on a Raspberry Pi 4 (8GB) in 2026: What Actually Works and How Slow It Is
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput and VRAM Limits in 2026
- 42 LLMs Tested for Apocalypse Compliance: What Data Shows
- Sega Genesis Mini vs Raspberry Pi Emulation in 2026: Which to Buy?
- pxpipe Cuts Claude Code Token Costs Up to 70%: How It Works, When to Go Local
- Period-Correct 1999 Voodoo2 SLI + Pentium III LAN-Party Build Log (2026)
- RTX 5080 vs RTX 5070: Which Blackwell GPU Should You Buy in 2026?
- Is Your First Homelab Right? A 2026 Hardware Sanity Check on a Ryzen 5 5600G
- Running a 3dfx Voodoo5 5500 PCI in a Modern Board in 2026
- Gemma 4 31B Creative-Writing Finetunes on RTX 3060 12GB
- Anthropic May Follow Microsoft to AMD: What It Means for Home AI Rigs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090