HUZUM
AC17VX2 Mixer Console Power Supply 3 pin High-Power Mixer Power Supply Mixing Console ac Adapter for Yamaha F4/F7/6FX/MG82X/MG10U/MG10xuf/MG16/MX1804X and Other 10-Channel or Above Mixing Consoles
Bottom line: The AC17VX2 Mixer Console Power Supply 3 pin High-Power Mixer Power is a specs-and-price decision rather than a crowd-consensus one in the accessories category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by HUZUM's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored AC17VX2 Mixer Console Power Supply 3 pin High-Power Mixer Power… using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. HUZUM's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【COMPATIBLE WITH】 : A great replacement power supply for Yamaha PA-10/ Alesis Multimix 8 USB//MG82X/MG10U/MG10xuf/BEHRINGER MX1804X/MG16/MG166CX/MG166C/F4/F7/6FX/for Yamaha 10 channel mixers or other mixers with 3-pin power connector.
- 【Parmeter】: Input volatage is 110V-120VAC @60Hz; Output rating is@ 17VACX2 1500mA 50VA, used Length: 3.9ft+6.5ft; Total 10.4ft with port,capable of meeting the power needs of various mixers
- 【3-Pin Connector Design】:Mixing console power adapter with 3-pin connector: 1 & 3 pins--17V, 2 pin--GND,offering strong adaptability.
- 【Safety Features】: Over current protection; Total power protection; Over voltage protection; Short Circuit Protection.Designed with transformer, providing more stable voltage to your mixing console.
Full Specifications
| Brand | HUZUM |
|---|---|
| Color | Black |
| Amperage | 1.5 A |
| Material | Plastic |
| Unit Count | 1 Count |
| Form Factor | benchtop |
| Connectivity | USB |
| Model Number | Huzum17VX2-1500 |
| Input Voltage | 109.98 volts |
| Maximum Power | 25.5 watts |
| Connector Type | 3-Pin |
| Output Current | 1.5 A |
| Output Voltage | 17 volts |
| Output Wattage | 25.5 watts |
| Specification Met | UL, FCC, RoHS |
| Enclosure Material | Plastic |
| Warranty Description | 2 year |
| Connector Type Used on Cable | 3-Pin |
Ready to buy?
AC17VX2 Mixer Console Power Supply 3 pin High-Power Mixer Power Supply Mixing Console ac Adapter for Yamaha F4/F7/6FX/MG82X/MG10U/MG10xuf/MG16/MX1804X and Other 10-Channel or Above Mixing Consoles is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- ASUS TUF 27" 1440p vs Samsung Odyssey G5 32": Best High-Refresh Esports Monitor
- How to run DeepSeek-R1 32B on Arc B580
- This Open-Source KVM Runs a Pentium 4 Instead of a Raspberry Pi
- Mistral Medium 3.5 Local Inference: VRAM, Quantization & Tokens/sec on Consumer GPUs
- RX 9060 XT vs RX 9070 XT: OLED 1440p or 4K IPS?
- Best Controller for PC Emulation in 2026: Pro 2 vs DualSense
- Microsoft + Nvidia Agent PCs: Hardware to Run Agents Locally
- Bridging Retro Audio: Sound Blaster Legacy to a Modern Sound BlasterX G6
- Intel Arc AI Training in 2026: What Workloads Actually Work
- MAYFLASH F300 vs GameSir G7 SE: Best Controller for PC Fighting Games (2026)
- LiquidAI LFM2.5-8B-A1B: An 8B MoE You Can Run on a 12GB RTX 3060
- Best Parts for an Always-On Local LLM Server in 2026
- RTX 5080 vs RX 7900 XTX: Which GPU Wins in 2026?
- Proprietary Models See Your Business: The Case for a Local Ryzen + RTX 3060 Rig
- AMD Ryzen 7 5800X3D Re-Review: DDR4's Last Gaming Champion in 2026
- Sega Saved Nvidia in 1996: The NV1 Gamble That Shaped Every GPU
- Best Streaming and Content-Creation Gear in 2026
- Rescue a Dying Vintage IDE Drive by Cloning It to CompactFlash
- Best Gaming Setup for Kids and Teens in 2026: 5 Picks
- 1-Trillion-Param LLM on 768GB of Optane vs a 12GB RTX 3060: What's Practical
- Logitech G29 vs HORI Racing Wheel Overdrive: Which Entry Sim Wheel Wins?
- CompactFlash-to-IDE Boot Drive: The Silent Win98 Build Upgrade
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- Best Gaming Mouse Pad for Competitive FPS in 2026: 5 Picks Ranked by Glide, Tracking, and Sweat Resistance
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090