Wanotine 532440934 Zone Control Cable 440934 for Murray
Bottom line: The Wanotine 532440934 Zone Control Cable 440934 for Murray: Direct replacement for OEM part numbers 440934 and 532440934; main trade-off: walk-behind mowers only; not listed for riding mowers or lawn tractors.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Direct replacement for OEM part numbers 440934 and 532440934
- ✓ 53 in. total length with 44-1/2 in. conduit, matching the stock cable spec
- ✓ Z-bend on each end, so there are no end fittings to crimp or adjust
- ✓ Listed for Husqvarna 5521CM, 5521P, 6021P, 7021P, LC153 and R53 mowers
- ✓ Covers Poulan PR500N21SH, PR550N22S and Murray 20, 21 and 22 in. push mowers
Cons
- ✗ Walk-behind mowers only; not listed for riding mowers or lawn tractors
- ✗ Fit depends on exact model number; check it against the listed models first
- ✗ Third-party Wanotine part, not OEM-branded Husqvarna or AYP
- ✗ No mounting clips or hardware listed as included
SpecPicks Verdict
SpecPicks scored Wanotine 532440934 Zone Control Cable 440934 for Murray using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. Wanotine's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Replaces Part Number: Husqvarna / Craftsman / AYP 440934, 532440934
- 532440934 Zone Control Cable Compatible with Husqvarna, Craftsman, AYP, Poulan, Weed Eater, Murray Walk Behind Lawn Mowers
- 440934 Control Cable Used on Murray 20'', 21'', 22'' Push Mower; Husqvarna 38454, 5521CM, 5521P, 6021P, 7021P, 7021KP, LC153, LC153HD, R53 Walk-Behind Mower
- Used on Poulan PR500N21SH, PR550N22S, PO500N22S, PO500N22SH, PR550N22SH, PR625N21RH3, PR625N21RH3X, 96114000400, 9611400100, 96114002300 Lawn Mower
- Cable Total Length: 53 inch, Conduit Length: 44-1/2 inch, Cable ends Z bend on each end
Full Specifications
| Brand | Wanotine |
|---|---|
| Cable Total Length | 53 inch, Conduit Length: 44-1/2 inch, Cable ends Z bend on each end |
| Replaces Part Number | Husqvarna / Craftsman / AYP 440934, 532440934 |
| Full listing title | 532440934 Zone Control Cable 440934 for Murray, Poulan, Husqvarna, Craftsman, AYP Walk-Behind Lawn Mower, Replaces 440934 Control Cable |
Ready to buy?
532440934 Zone Control Cable 440934 for Murray, Poulan, Husqvarna, Craftsman, AYP Walk-Behind Lawn Mower, Replaces 440934 Control Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget PC Upgrades for 1440p Gaming in 2026
- Best 1440p 240Hz Gaming Monitors in 2026
- Best Controller for PC and Steam Gaming in 2026: G7 SE vs 8BitDo Pro 2 vs DualSense
- Vision LLMs Driving Win98 Driver Installs: Inside Our 4-PC Retro Fleet
- Best Raspberry Pi Alternative for Home Assistant (2026)
- Linux Gaming Is Getting Faster: Windows APIs Hit the Kernel
- Qwen 3.6 27B vs Sonnet 4.6: Local Agentic Benchmarks
- AMD Ryzen AI Max 400 'Gorgon Halo': 192GB Unified Memory for Local LLMs
- Anthropic Raises $65B Series H Near a Trillion-Dollar Valuation: What It Means for Local-AI Builders
- Using Claude to Drive Period-Correct Win98 Driver Installs on Voodoo and GeForce 4 Hardware
- Rescue Dying Vintage IDE & SATA Drives with a USB Adapter Before They Fail
- Ryzen 7 5800X vs Ryzen 9 3900X: Mistral Small 24B Offload (2026)
- Can the RTX 3060 12GB Run Qwen3-27B Locally in 2026?
- Run Qwen Locally: Apple Silicon vs a 12GB RTX 3060 Rig in 2026
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5080
- Build a Raspberry Pi 4 NAS With an SSD in 2026
- Advanced Raspberry Pi Projects for Adults (2026 Guide)
- KOORUI 27" 4K vs Samsung Odyssey 4K for Console + PC Gaming
- Best Steam Deck Accessories in 2026: Docks, Audio, Controllers, and Storage
- Crucial BX500 vs Samsung 870 EVO vs SanDisk SSD Plus: Best Budget SATA SSD
- Claude Limits Cut: Why a Local Fallback Rig Just Got Cheaper
- Best GPU for Running Llama 3 8B Locally Under $350 (2026)
- Crucial BX500 vs Samsung 870 EVO for Budget & Retro Builds
- DeepSeek V4 Flash on a 12GB RTX 3060: The Cheapest Agentic Model, Run Local
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090