Noctua NF-A14x25 G2 PWM Sx2-PP, Dual Fan Set for Push-Pull and Side-by-Side Applications (Brown)
Bottom line: The Noctua NF-A14x25 G2 PWM Sx2-PP ($84.95 on Amazon as of 2026-10-21 04:20 UTC): Two fans offset ~25rpm to prevent acoustic interaction; main trade-off: brown/beige colorway clashes with most build themes.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Two fans offset ~25rpm to prevent acoustic interaction
- ✓ Premium SSO2 bearing rated MTTF over 150,000 hours
- ✓ Sterrox LCP blades with ultra-tight tip clearance
- ✓ Includes LNAs, y-cable, anti-vibration mounts and gaskets
Cons
- ✗ Brown/beige colorway clashes with most build themes
- ✗ 140mm size won't fit 120mm fan mounts
- ✗ Standard 25mm thickness can crowd very tight cases
- ✗ Y-cable splits one header, limiting independent PWM control
SpecPicks Verdict
SpecPicks scored Noctua NF-A14x25 G2 PWM Sx2-PP using a rating × review-volume × price-fit model applied to published specs and reviews across the PC & gaming hardware category. Noctua's PC & gaming hardware lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for PC & gaming hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Dedicated dual fan set with two NF-A14x25 G2 PWM 140x25mm fans that are slightly off-set in speed (+/- ~25rpm) in order to avoid undesired acoustic interaction phenomena
- State-of-the-art engineering (Progressive-Bend impeller with winglets and Centrifugal Turbulator, Flow Acceleration Channels, AAO frame) and construction (Sterrox LCP, ultra-tight tip clearance)
- Ideal choice for push-pull applications as well as situations where two fans are operating side by side (280mm water cooling radiators, case intake or exhaust fans, etc.)
- Includes anti-vibration mounts, anti-vibration gaskets for tighter seal on radiators, fan screws, Low-Noise Adaptors (LNA), extension cables and y-cable for running two fans on the same header
- Trusted Noctua quality with premium-grade SSO2 bearing (MTTF > 150,000 h), safety certifications from UL and TÜV, protected against reverse polarity, over voltage and over current (short-circuits)
Full Specifications
| Brand | Noctua |
|---|---|
| Model | NF-A14x25 G2 PWM Sx2-PP |
| Voltage | 12 Volts |
| Material | Sterrox LCP |
| Unit Count | 2.0 Count |
| Noise Level | 24.8 Decibels |
| Part Number | NF-A14x25 G2 PWM Sx2-PP |
| Material Type | Sterrox LCP |
| Cooling Method | Air |
| Number of Items | 2 |
| Vibration/Rumble | Yes |
| Compatible Devices | Desktop |
| Power Connector Type | 4-Pin |
| Maximum Rotational Speed | 1500 RPM |
| Item Dimensions L x W x H | 5.51"L x 5.51"W x 0.98"H |
Ready to buy?
Noctua NF-A14x25 G2 PWM Sx2-PP, Dual Fan Set for Push-Pull and Side-by-Side Applications (Brown) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Minecraft on Raspberry Pi via Vulkan: 2026 Setup Guide
- Build a RetroPie Handheld with the Raspberry Pi Zero W in 2026: Full BOM + Setup
- Best Budget NVMe SSD for a Big Steam Library: WD Blue SN550 vs SATA
- Best Controller for PC Gaming in 2026: GameSir G7 SE vs DualSense vs HORI
- Best CPU Cooler for Ryzen 7 5800X Heavy Workloads (2026)
- Period-Correct Storage for a Windows XP Gaming Rig: SSD, CompactFlash, or IDE?
- Hugging Face Says an AI Agent Breached Its Infrastructure
- Hackaday Europe 2026: Building a Retro PC From Scratch
- RTX 5070 Ti vs 4070 Ti SUPER
- Best Raspberry Pi Alternative for Home Assistant (2026)
- Imaging Vintage IDE Drives in 2026: A CompactFlash + USB Adapter Workflow
- What Happened to the LLM Training Data Shortage?
- Build a Wireless Fingerprint Door Lock on a Raspberry Pi Zero W
- Quietest AM4 CPU Cooler in 2026: Noctua NH-U12S vs DeepCool AK620 vs AC Infinity
- RTX 5090 vs RTX A6000 for Local LLMs: Speed (5090) or Capacity (A6000)?
- Build a Retro Emulation Handheld on Raspberry Pi Zero W with RetroPie
- Best Streaming Starter Kit for New Twitch Streamers in 2026
- How to Identify Any Vintage GPU: A Visual + GPU-Z Guide for Retro PC Builders
- Modern CRT Monitor for Retro Gaming: The 2025 Reality Check
- Best Raspberry Pi Alternative for AI Inference in 2026: When to Step Up
- Aureal Vortex 2 vs Sound Blaster Live!: A3D 2.0 vs EAX in Vintage PC Gaming
- Best Wireless Gaming Controller for PC and Console (2026)
- Ideogram 4.0 Open Weights: Native 2K Image Gen on a 12GB GPU
- Best Raspberry Pi Alternative for Emulation (2025)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090