SEDNA - PCIe Quad SATA 6G 4 Port Raid Adapter with HyoperDuo Hard Disk Acceleration Function
Bottom line: The Sedna PCIe Quad SATA 6G 4 Port Raid Adapter is a specs-and-price decision rather than a crowd-consensus one in the expansion cards category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Needs a free PCIe slot — check which of your board's slots are wired for it
Manufacturer description
Features :Chipset: Marvell 88SE9230 support HyoperDuo4 SATA III port provide 6Gbps transfer rate per portRAID function supportedHyoperDuo technology, with low capacity SSD can be used as accelerating cache drive for high capacity standard HDD, making a low cost combination of super fast big capacity storage systemSpecifications :PCIE 4 Port SATA III (6G) PortHyoperDuo technology for Hard disk accelerationPCI Express 2X Specification Rev. 2.02-Lane (x2) PCI-Express with transfer rate 5Gb/s Full Duplex channelCompliant with Serial ATA 3.0 Specification,Data transfer rate up to 6.0Gb/sBackward…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Sedna PCIe Quad SATA 6G 4 Port Raid Adapter, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Chipset: Marvell 88SE9230 support HyoperDuo 4 SATA III port provide 6Gbps transfer rate per port RAID function supported HyoperDuo technology, with low capacity SSD can be used as accelerating cache drive for high capacity standard HDD, making a low cost combination of super fast big capacity storage system
Full Specifications
| Brand | Sedna |
|---|---|
| Weight | 6g |
| Model Number | SE-PCIE-SATA6G-04R-MA-LP |
| Number of Items | 1 |
| Hardware Interface | SATA 6.0 Gb/s |
| Warranty Description | 12 months |
| Item Dimensions L x W x H | 3.9"L x 0.8"W x 4.7"H |
Ready to buy?
SEDNA - PCIe Quad SATA 6G 4 Port Raid Adapter with HyoperDuo Hard Disk Acceleration Function is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best Gaming Monitors in 2026: 1080p, 1440p, and 4K Picks
- KOORUI 27" 4K vs Samsung Odyssey 27" 4K for PS5 and PC Gaming
- Best Gaming Headset in 2026 for Gaming and Music
- Intel Arc GPU for Stable Diffusion: Setup & Benchmarks
- Intel Arc B50 for Stable Diffusion vs RTX 3060 12GB: Which Wins in 2026
- Raspberry Pi 5 + Hailo-8 vs Jetson Orin Nano Super: Which Edge AI Box Wins for Vision Workloads?
- Intel Arc AI Inference: 2025 Performance & Setup Guide
- Best NVMe SSD for PC Gaming Builds in 2026
- Kimi K3 Lands #5 on Coding Agents: What You Can Actually Run Local
- vLLM vs llama.cpp for Single-User Local Chat on a 12GB GPU
- KOORUI vs Samsung Odyssey: Best 27-inch 4K Gaming Monitor in 2026
- Raspberry Pi Home Automation Projects: A 2025 Starter Guide
- Asus ROG Harpe II Extreme: 24K-Gold, 65K-Sensor Gaming Mouse
- GLM-5.2 vs Claude Opus 4.7: Open-Weights Value on Local GPUs
- Can a Raspberry Pi 4 Run a Local LLM? Ollama tok/s Tested
- DualSense vs 8BitDo Pro 2 vs GameSir G7 SE: Best PC Controller in 2026
- Best GPU for Local LLMs Under $350: Why the RTX 3060 12GB Still Wins
- Ryzen 5 5600G vs Ryzen 7 5700X vs Ryzen 7 5800X for 1080p Gaming in 2026
- Gemma 4 Tool-Calling Fix: Re-test Function Calls Locally
- RTX 3090 vs RTX 4090 for LLM Inference: Same 24GB (2026)
- Qwen 3.6 27B at 2x tok/s: Luce DFlash on One RTX 3090
- RTX 3060 12GB vs RX 7600 XT for Local LLMs: The Cheap Inference Card to Buy in 2026
- Best SATA SSD in 2026: Crucial BX500 vs Samsung 870 EVO vs WD Blue vs SanDisk
- Best CPU Coolers for AMD Ryzen 5000 (AM4) in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090