Sirlyr RGB PSU Cables Cover Set with Two Lighting Panels
Bottom line: Per its Amazon listing, the Sirlyr RGB PSU Cables Cover Set with Two Lighting Panels ($32.89 on Amazon as of 2026-11-21 11:27 UTC): in 5V SYNC mode.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ In 5V SYNC mode
- ✓ Backed by Sirlyr's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Sirlyr RGB PSU Cables Cover Set with Two Lighting Panels, so this read rests on the manufacturer's listed specs and the current price in the rgb & lighting category (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Universal Compatibility:Designed for PSU cable extensions and modular cables with a diameter of 2-3.5mm, this RGB lighting kit includes three sizes of cable combs. It supports 24 pin motherboard cables, 3x8pin, 2x8pin PCIe cables, single 8pin and 16pin GPU cables. The set comes with two lighting panels for synchronized RGB effects on both motherboard and GPU cables.
- Easy Installation:The PSU cable RGB panels feature a snap-on design, allowing you to securely attach them to your cables. Use the included cable combs to organize and manage your cables for a clean and tidy PC build. Connect the ARGB controller via a 3-pin header or SATA power to activate vibrant and customizable lighting effects.
- Second-Generation RGB Panels:Upgraded with softer LED strips and increased density, the new RGB panels now feature six LED strips (up from three) for more uniform lighting with reduced hotspots and shadows. With 120 LEDs and a thinner silicone light guide, the panels deliver brighter, more vivid colors and can be easily shaped to fit even compact PC cases.
- Dual Lighting Control Methods:Each LED is individually addressable, offering advanced customization through motherboard ARGB software or the included RGB controller. In 5V SYNC mode, connect to the motherboard 3-pin header or daisy-chain with other ARGB devices for synchronized lighting effects. In controller mode,powered by SATA cable, adjust the lighting effects via the RGB remote control effortlessly.
- Durability and Reliability:The ARGB panels are backed by a 20,000-hour lifespan warranty and have undergone rigorous testing, including 10,000 bend cycles, to ensure consistent performance. The dedicated 8 pin power cable provides sufficient current, preventing power issues commonly seen with standard 3 pin cables when daisy-chaining multiple ARGB devices.
- Comprehensive Kit:The RGB cable extension kit includes two lighting panels, an ARGB controller, a SATA power cable, a 5V 3-pin connector, an ARGB remote, and three sizes of cable combs for 24 pin ATX, 3x8pin GPU, 2x8pin GPU, single 8pin GPU, and 12VHPWR cables.
Full Specifications
| Brand | Sirlyr |
|---|---|
| Model | 6c9c7237-a6da-4bf8-bbb9-d528f712c85f |
| Cable Type | ATX |
| Unit Count | 5 Count |
| Compatibility | PC |
| Connector Type | ATX |
| Number of Pins | 24 |
| Maximum Voltage | 12 volts_of_direct_current |
| Number of Items | 2 |
| Special Feature | Lightweight |
| Connector Gender | Male-to-Female |
| Compatible Devices | Laptop |
| Indoor Outdoor Usage | Indoor |
| Warranty Description | 1 year warranty |
| Recommended Uses For Product | PC Builds |
| Other Special Features of the Product | Lightweight |
| Full listing title | Sirlyr RGB PSU Cables Cover Set with Two Lighting Panels,Modular,fit 24 Pin ATX,8 Pin GPU,12VHPWR Power Supply Extension - Upgrade 120 LEDs 6 Light Strips with Remote ARGB Control for PC Build |
Ready to buy?
Sirlyr RGB PSU Cables Cover Set with Two Lighting Panels,Modular,fit 24 Pin ATX,8 Pin GPU,12VHPWR Power Supply Extension - Upgrade 120 LEDs 6 Light Strips with Remote ARGB Control for PC Build is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- RX 9070 XT vs RTX 3060 12GB for Local LLMs
- DIY Steam Controller Puck Adds Xbox, Switch and PS Emulation Modes
- DeepSeek V4.1-Flash on One RTX 3060 12GB vs Two: Why Neither Can Load It, and What 24 GB Runs Instead
- Ryzen AI Max+ 395 Review: Specs and What It's Really For
- Best Streaming Starter Kit for New Creators in 2026
- Running a 3dfx Voodoo5 5500 PCI in a Modern Board in 2026
- GameSir G7 SE vs DualSense vs 8BitDo Pro 2 for PC Gaming in 2026
- Sound Blaster Live! Restoration Guide: Period-Correct Audigy FX Bridge for Win98 Builds
- Which GPU for Which Model: A Per-LLM VRAM Picker for Local Rigs (2026)
- Local 13B LLM Inference on a $700 Used Build: Ryzen 7 3700X + RTX 3060 12GB Benchmarked
- Is vLLM Worth It If You're Not Serving Other Users?
- Best SSD to Upgrade a PS4 Pro: Samsung 870 EVO vs Crucial BX500
- RX 9070 XT vs RTX 5080 for a 9800X3D Build (2026)
- Best Mouse Pads for Competitive FPS Gaming in 2026
- Best Budget PC Gaming Peripherals in 2026: 5 Picks That Punch Above Their Price
- Best GPU for Llama 3.1 70B (2026)
- Best Performance-per-Dollar Hardware Rankings 2026
- AI-Driven Sound Blaster Driver Install on WinXP via Vision LLM
- Best SSD for a Raspberry Pi 5 Boot Drive in 2026
- Horse Riding Game Controller for PC/Mac: Buy or Build
- Best Capture Device for Recording Retro Consoles and Old PCs in 2026
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: Real Performance
- Run Chrome's Tiny Gemini Nano AI on PC Without a GPU
- Best Streaming Starter Kits in 2026: Mic, Light, Capture, and the One-Box Builds
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090