Thermal Grizzly
Thermal Grizzly Minus Pad Basic
Bottom line: The Thermal Grizzly Minus Pad Basic ($17.99 on Amazon as of 2026-10-06): Two 100x100mm sheets per pack, enough to cut pads for several components; main trade-off: single 1.5mm thickness; the wrong gap size means poor contact, so measure first.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Two 100x100mm sheets per pack, enough to cut pads for several components
- ✓ 1.5mm thickness fills larger gaps between chips and their heatsinks
- ✓ Electrically non-conductive, so no short risk if it touches board traces
- ✓ High compressibility helps it conform to uneven component heights
- ✓ Cut-to-fit sheets work for M.2 SSDs, GPUs and graphics card coolers
Cons
- ✗ Single 1.5mm thickness; the wrong gap size means poor contact, so measure first
- ✗ Thermal conductivity rating (W/mK) is not stated in the listing
- ✗ Must be cut by hand for each chip; no pre-cut shapes included
- ✗ GPU repads with mixed gap heights need a second pack in another thickness
SpecPicks Verdict
SpecPicks scored Thermal Grizzly Minus Pad Basic using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Thermal Grizzly's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Premium Thermal Performance: Enjoy top-tier cooling efficiency with heat dissipation for your high-performance systems.
- Thermal Conductivity: Engineered to rapidly transfer heat, ensuring optimal performance under heavy loads.
- Exceptional Gap Filling: High compressibility delivers flawless contact between components for improved cooling.
- Electrically Non-Conductive: Safely protects sensitive electronics by preventing electrical shorts.
- Versatile Compatibility: Perfect for cooling SSDs, GPUs, graphics card coolers, and various other electronic components.
Full Specifications
| Brand | Thermal Grizzly |
|---|---|
| Model | TG-MP-B-100-100-15-2 |
| Dimensions | 100x100x1.5mm |
| Part Number | TG-MP-B-100-100-15-2 |
| Mounting Type | Chassis Mount |
| Thermal Conductivity | Engineered to rapidly transfer heat, ensuring optimal performance under heavy loads. |
| Warranty Description | 2 Years |
| Exceptional Gap Filling | High compressibility delivers flawless contact between components for improved cooling. |
| Versatile Compatibility | Perfect for cooling SSDs, GPUs, graphics card coolers, and various other electronic components. |
| Item Dimensions L x W x H | 3.94"L x 3.94"W x 0.59"H |
| Electrically Non-Conductive | Safely protects sensitive electronics by preventing electrical shorts. |
| Premium Thermal Performance | Enjoy top-tier cooling efficiency with heat dissipation for your high-performance systems. |
| Global Trade Identification Number | 04260711991479 |
| Full listing title | Thermal Grizzly Minus Pad Basic - 100x100x1.5mm 2-Pack Thermal Interface Pad, Electrically Non-Conductive, High Thermal Conductivity & Compressibility for SSDs, GPUs & Electronics |
Ready to buy?
Thermal Grizzly Minus Pad Basic - 100x100x1.5mm 2-Pack Thermal Interface Pad, Electrically Non-Conductive, High Thermal Conductivity & Compressibility for SSDs, GPUs & Electronics is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Training an LLM in Swift, Part 1: Matrix Mult Speed
- Sega Genesis Mini vs SNES Classic: The Definitive 2026 Plug-and-Play Retro Showdown
- AI-Driven Driver Install on Windows 98: TNT2, Voodoo3, and SoundBlaster Live! Walked by Claude
- Turtle Beach Recon 50 in 2026: Is the $40 Gaming Headset Still Worth It?
- FIDECO vs Unitek SATA/IDE-to-USB Adapters: Imaging and Rescuing Vintage Drives in 2026
- Best Mid-Range CPU for Streaming and Gaming in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- Intel Arc Pro B60 Gaming Guide: 24GB Battlemage in 2026
- LiteLLM as a Fallback Router: Keep Working When Limits Hit
- Gemma-4-Harmonia-31B Heretic: What the Uncensored Merge Adds Over Base Gemma 4
- Best Budget Gaming Peripherals Under $100 in 2026
- AMD Radeon RX 9070 GRE Review: Thoroughly Midrange
- Ryzen 5 2600 vs Ryzen 5 5600G for CPU-Only Llama 3.2 3B in 2026
- Best Budget GPU for Local 12B–14B LLM Inference: Why the RTX 3060 12GB Still Wins
- Noctua NH-U12S vs NZXT Kraken M22 in a Mini-ITX Ryzen 7 5800X Build
- How to Find and Join Active UT99 and UT2004 Servers in 2026
- NEEWER 18" vs UBeesize 22" Ring Light for Webcam Streaming (2026)
- ASUS ProArt PA27USD Lands: 27-Inch OLED Aims at Gaming
- Build a Pi Zero 2 W Retro Mini-TV: Full Parts List and Setup
- MAYFLASH F300 vs DualSense for PC Rhythm Games (2026)
- OpenAI Codex Now Encrypts Agent-to-Agent Instructions: The Case for Local, Auditable Agents
- Best Budget PC Upgrades Under $250 in 2026
- Sound Blaster Audigy FX in a Period-Correct Win98 Gaming Build
- Building a Period-Correct 2003 WinXP Gaming Rig with Sound Blaster Audigy and a Modern 8BitDo Controller
- Custom Steam Controller Startup: Reviving OG Big Picture Mode
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090