NGFF SFF-8482 SAS 29Pin Target to 7+15 22Pin SATA Host HDD Disk Drive Raid Adapter 6Gbps
Bottom line: The SFF-8482 SAS 29Pin Target to 7+15 22Pin SATA Host HDD Disk Drive Raid is a specs-and-price decision rather than a crowd-consensus one in the storage adapters category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by NGFF's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored SFF-8482 SAS 29Pin Target to 7+15 22Pin SATA Host HDD Disk Drive… using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. NGFF's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 1) This adapter has built-in chip, Can convert SAS disk to the SATA interface of the common motherboard, so SATA computers can also use the SAS disk and no need any SAS raid card.
- 2) if your SATA interface without SAS function, Connect our adapter, it can directly read/write SAS hard disk, support win7, win10, win11, lunix operating system.
- 3) It is not recommended to connect the USB disk enclosure or cable, The USB master chipset is not adapted, incompatibility may occur.
- 4) After conversion, the SMART of the SAS hard disk will display incomplete or no information, but it will not affect normal reading and writing.
- 5) Supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.Only SFF-8482 SAS hard disks are supported, and SFF-8639 U.2 hard disks are not supported.
Full Specifications
| Brand | NGFF |
|---|---|
| Color | Black |
| Unit Count | 1 Count |
| Connectivity | USB |
| Model Number | SF-090-SATA-NG |
| Connector Type | SAS SFF-8482 29pin, SATA |
| Mfr Part Number | SF-090-SATA-NG |
| Number of Items | 1 |
| Number of Ports | 2 |
| Compatible Devices | Laptop & Desktop & Disk & NAS & Server |
| Warranty Description | One Year Manufacturer |
| Full listing title | SFF-8482 SAS 29Pin Target to 7+15 22Pin SATA Host HDD Disk Drive Raid Adapter 6Gbps with Chipset and Power Port |
Ready to buy?
SFF-8482 SAS 29Pin Target to 7+15 22Pin SATA Host HDD Disk Drive Raid Adapter 6Gbps with Chipset and Power Port is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a 2026 Build
- Grok 4.5 at $0.31 a Task: When Cheap Cloud Beats a Local Build
- Build a Raspberry Pi Bird-Song Logger with a USB Mic (2026)
- AMD Radeon RX 9070 GRE Review: Thoroughly Midrange
- Kimi K3 Just Launched: What You Can (and Can't) Run Locally Instead
- Best CPU Under $300 for a 1080p Gaming Build (2026)
- A New Benchmark Says AI Fails at Real Knowledge Work — Does a Bigger Local Rig Help?
- USB-to-IDE Adapter vs CF-to-IDE for Imaging Retro PC Drives
- Bridging Retro Audio: Sound Blaster Legacy to a Modern Sound BlasterX G6
- Jetson Orin Nano Super vs Hailo-8 AI HAT+: Which Edge-AI Path Is Right for You?
- Running a Local LLM on a Raspberry Pi 4 Cluster — Realistic Expectations for 2026
- CompactFlash Boot Drive for Windows 98: Transcend CF133 Setup and Benchmarks
- Best Travel Gaming Kit in 2026: 5 Picks for Hotels and Flights
- Best GPU for Running Llama 3.1 8B Locally on a Budget (2026)
- Jellyfin on a Raspberry Pi 4 8GB: What It Can and Can't Transcode
- Best Streaming Gear for New Creators in 2026
- Gemini 3.5 Flash Can Drive Your Screen — Build a Local Agent Rig Instead
- Alienware AW3426DW Review: QD-OLED Ultrawide Gaming at $699
- Sound Blaster on a Retro Gaming PC: Period-Correct Audio and the Modern G6 Bridge
- Quake 3 + UT99 Dedicated Server on Raspberry Pi 4 8GB: Headless AI-Managed Setup (2026)
- Ryzen 7 5800X3D Hard to Find: DDR5 CPU Alternatives Worth It?
- Best Internal SSD for a PS4 Pro Upgrade: 2.5" SATA Picks That Cut Load Times
- Solar-Powered Bird Identifier: Raspberry Pi Zero 2W + AI Camera
- AMD RX 9070 XT Hits All-Time Low $629 in Amazon Lightning Sale
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090