AA AUDIO ACCESSORY
AA AUDIO ACCESSORY Short Mic Stand Desk
Bottom line: The AA AUDIO ACCESSORY Short Mic Stand Desk: Ultra-low 5 to 7.6 inch height range puts tall mics at seated mouth level; main trade-off: 7.6 inch max height is too short for standing or boom-arm style setups.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Ultra-low 5 to 7.6 inch height range puts tall mics at seated mouth level
- ✓ 6.6lbs load rating handles an SM7B plus pop filter without sagging
- ✓ 900g weighted metal base resists tipping with no counterweight needed
- ✓ Ships with 3/8-to-5/8 and 3/8-to-1/4 adapters plus a cable clip
Cons
- ✗ 7.6 inch max height is too short for standing or boom-arm style setups
- ✗ No shock mount included, so desk thumps transfer through the pole
- ✗ Fixed vertical pole only, with no horizontal reach or swivel arm
- ✗ 900g base takes up permanent desk real estate versus a clamp mount
SpecPicks Verdict
SpecPicks scored AA AUDIO ACCESSORY Short Mic Stand Desk using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. AA AUDIO ACCESSORY's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- [Ultra-Low 5 Inch Height Adjustment] The short mic stand is adjustable from 5 Inch to 7.6 Inch (12.7 - 19.3cm), making it ideal for taller microphones or mics with built-in stand. Position your mic right at mouth level for comfortable, natural recording while seated.
- [6.6lbs Load Capacity] Supports microphones up to 6.6lbs, handling heavy studio mics with confidence. Even with a pop filter or windscreen attached, the table mic stand remains steady without sagging.
- [Self-Weighted Anti-Tip Base] The solid 900g weighted base provides built-in stability, no extra counterweights needed. Four eco-friendly non-slip pads help prevent sliding and protect your desk surface.
- [All-Metal Construction] Crafted entirely from metal, including the base, telescopic pole, and adjustment knob, for a premium feel and long-lasting durability. Perfect for professional recording, podcasting, interviews, and streaming setups.
- [Universal Mic Compatibility, Especially Heavy Mics] This desk mic stand is compatible with a wide range of popular microphones, including Shure SM7B, SM7dB, MV7, MV7+, MV7X, RODE PodMic, AT2020, AT2035, FIFINE AM8, K669B, HyperX QuadCast, SoloCast, Snowball iCE, Elgato Wave, Blue Yeti, and more. Equipped with sturdy 1/4", 3/8" and 5/8" adapters for a tight, wobble-free connection, this mic boom arm connects seamlessly to most mic mounts.
- [What’s in the Box] Weighted base, telescopic pole, 3/8” to 5/8” adapter, 3/8” to 1/4” adapter, and cable clip.
Full Specifications
| Brand | AA AUDIO ACCESSORY |
|---|---|
| Color | Black |
| Style | Industrial Desk Mic Stand, Compact Desk Mic Stand |
| Weight | 900g |
| Material | Aluminum, Metal |
| Base Type | Flat |
| Unit Count | 1 Count |
| Model Number | ADS01 |
| Material Type | Aluminum, Metal |
| Product Style | Industrial Desk Mic Stand, Compact Desk Mic Stand |
| Item Type Name | Microphone Mount |
| Maximum Height | 19.3 centimeters |
| Number of Items | 1 |
| Body Material Type | Metal |
| Included Components | Weighted base, telescopic pole, 3/8” to 5/8” adapter, 3/8” to 1/4” adapter, cable clip |
| Warranty Description | 1 year warranty. |
| Manufacturer Part Number | ADS01 |
| Microphone Stand Thread Size | 3/8 inch, 5/8 Inch |
| Maximum Weight Recommendation | 3 kg |
| Full listing title | AA AUDIO ACCESSORY Short Mic Stand Desk, Ultra Low 5 Inch Adjustable, 6.6lbs Load Capacity, All-Metal Desktop Microphone Stand Table for Shure SM7B SM7dB MV7+ MV7X MV6, Fifine Yeti Rode PodMic MAONO |
Ready to buy?
AA AUDIO ACCESSORY Short Mic Stand Desk, Ultra Low 5 Inch Adjustable, 6.6lbs Load Capacity, All-Metal Desktop Microphone Stand Table for Shure SM7B SM7dB MV7+ MV7X MV6, Fifine Yeti Rode PodMic MAONO is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi 4 8GB vs Pi 5 vs Pi Zero W for a 2026 Homelab
- Steam Deck OLED vs ROG Ally Z1 Extreme: 2025 Comparison
- Ryzen 5 2600 vs Ryzen 9 3900X: Do 12 Cores Buy CPU-Only 8B Inference?
- Mistral Medium 3.5 Dense Local Inference: Hardware Tiers from 24GB to 192GB
- Surprise AI Bills: Moving LLM Work to a Local RTX 3060 12GB Rig
- Athlon XP + Radeon 9800 Pro AGP Build Guide: 2003 Period-Correct Rig
- Best Budget Streaming Setup in 2026: 5 Picks Under Budget
- Intel Arc Stable Diffusion Guide: Setup & Benchmarks 2025
- Raspberry Pi AI HAT+ 26 TOPS: Specs, Setup, and Verdict
- llama.cpp vs vLLM for Single-User Local Chat on a 12GB GPU (2026)
- Logitech G502 Hero vs Modern FPS Mice: Is the Classic Still Worth It in 2026?
- Best GPU for ComfyUI and SDXL Under $400 in 2026
- Logitech G29 vs HORI Force Feedback: Which Sim Wheel for Beginners?
- Using a Raspberry Pi 5 with AI to Recover Lost Windows 98 INF Files (2026)
- Jellyfin vs Plex on a Raspberry Pi 4 (8GB) in 2026: Transcoding, Power Draw, and Which to Self-Host
- Dual RTX 3090 LLM Training: 2026 Benchmarks & Build Guide
- vLLM on an RTX 3060 12GB: Is It Worth It for Single-User Chat?
- OpenAI Says GPT-5.5-Cyber Beats Anthropic's Mythos on Security
- 3dfx Voodoo3 3000 PCI vs Voodoo5 5500 AGP: Win98 Performance Synthesis (2026)
- Best Raspberry Pi 4 Starter Kit Bundle for First-Time Robotics Builders in 2026
- Raspberry Pi 4 8GB as a Local LLM Box: What Models Actually Run?
- KOORUI 27" QD-Mini LED vs Samsung Odyssey 27" 4K: Which 4K Panel for Console + PC?
- CompactFlash as an IDE Hard Drive for Your Win98 Retro Build
- Best Gaming Monitors in 2026: 1080p, 1440p, and 4K Picks
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090