MOPFOL 2.5" SATAs to IDE 44Pin Adapter Card
Bottom line: The MOPFOL 2.5" SATAs to IDE 44Pin Adapter Card is a specs-and-price decision rather than a crowd-consensus one in the storage adapters category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Confirm socket / form-factor / power-rating compatibility against your build before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
This 2.5" SATAs to IDE adapter card enables seamless connection of modern 2.5-inch SATAs hard drives to older IDE motherboard interfaces. It provides a reliable data transfer solution for upgrading legacy systems without requiring external power or additional driversSimply connect the 44-pin male IDE end to your motherboard and the 7+15-pin female SATAs end to your 2.5-inch hard drive. The hot-swap functionality allows drive changes without system reboot, while the ATA 66/100/133 compatibility ensures stable performance across various IDE standards. With a maximum transfer rate of 150MB/s…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOPFOL 2.5" SATAs to IDE 44Pin Adapter Card, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Universal Compatibility: Designed with standard 7+15PIN interfaces to connect modern 2.5-inch SATAs drives to legacy IDE motherboards with broad system support
- High-Speed Data Transfer: Supports with Serial ATA 1.0 specifications delivering maximum transfer rates of 150 MB/s for efficient file operates
- Hot Swap Support: Support hot swap, enables seamless drive swapping without requiring system reboots or additional drivers for effortless data management
- Compact and Durable: Measures 69×11×14 mm with an ABS construction for reliable performance in confined spaces, ideal for install 2.5-inch serial hard drive on the old motherboard machine
- No External Power Required: This adapter card operates without needing an external power supply for simplified setup and immediate use with your 2.5-inch SATAs drive
Full Specifications
| Brand | MOPFOL |
|---|---|
| Color | Green |
| Unit Count | 1 Count |
| Model Number | b408a9f18b |
| Built-In Media | Adapter Card |
| Connector Type | IDE |
| Mfr Part Number | PHMCY1H45/PH06-YT |
| Number of Items | 1 |
| Hot Swap Support | Support hot swap, enables seamless drive swapping without requiring system reboots or additional drivers for effortless data management |
| Compatible Devices | Laptop |
| Universal Compatibility | Designed with standard 7+15PIN interfaces to connect modern 2.5-inch SATAs drives to legacy IDE motherboards with broad system support |
| High-Speed Data Transfer | Supports with Serial ATA 1.0 specifications delivering maximum transfer rates of 150 MB/s for efficient file operates |
| No External Power Required | This adapter card operates without needing an external power supply for simplified setup and immediate use with your 2.5-inch SATAs drive |
| Full listing title | 2.5" SATAs to IDE 44Pin Adapter Card - Hot Swap Converter for Laptop HDD Hard Disk Drive, No External Power Needed |
Ready to buy?
2.5" SATAs to IDE 44Pin Adapter Card - Hot Swap Converter for Laptop HDD Hard Disk Drive, No External Power Needed is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Best Gaming Mouse for FPS Esports Under $80 (2026)
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- Best Raspberry Pi Alternatives for AI in 2026
- Samsung's 2026 Odyssey Lineup Adds 5K, 6K and a 360Hz 4K QD-OLED
- Hy3-Preview vs DeepSeek V4 Flash: Where the New Open-Weights Model Actually Lands
- Old Massive Chieftec Full Tower: Homelab Gem or Junk?
- Best Gaming Desk Setup Essentials in 2026: 5 Picks
- Is the RTX 3060 12GB Still Worth It for Gaming in 2026?
- Intel llm-scaler-vllm 1.4: Arc Pro B70 Inference Support Lands
- Build a Fully Local PDF-to-Audiobook Pipeline on Jetson Orin Nano Super
- Best GPU for 1440p Ultrawide Gaming in 2026: Performance Tier Breakdown
- DIY Ambient Home Hub: Raspberry Pi CM4 + ESP32-S3 for Kids
- Raspberry Pi Zero W Projects for Beginners in 2026
- Build a Retro Emulation Handheld on Raspberry Pi Zero W with RetroPie
- R36S Retro Handheld: Real Specs vs. the Hype (2026 Guide)
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe
- Ryzen 5 5600G vs Ryzen 7 5800X for a Budget 1080p Gaming Build
- Aider vs Cline vs Continue on a Local Coding Rig (RTX 3060, 2026)
- Best CPU for AI Inference Workstations in 2026
- RTX 3090 vs RTX 4090 for LLM Inference: Same 24GB (2026)
- Noctua NH-U12S vs NZXT Kraken M22 in a Mini-ITX Ryzen 7 5800X Build
- Best GPU for Forza Horizon 6 at 1440p in 2026 (Without Breaking the Bank)
- Anthropic Raises $65B Series H Near a Trillion-Dollar Valuation: What It Means for Local-AI Builders
- Best Budget Streaming Setup for Beginners in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090