WINSINN
40mm Fan 12V, 3D Printer Micro 12 Volt Fans 4010 Dual Ball Bearing, Brushless Cooling 40mmx10mm 2PIN (Pack of 2Pcs)
*Price sourced from Amazon.com. Last updated 2026-06-10. Price and availability subject to change.
Bottom line: The 40mm Fan 12V, 3D Printer Micro 12 Volt Fans 4010 Dual Ball Bearing, Brushless Cooling 40mmx10mm 2PIN (Pack of 2Pcs) is a niche pick — read recent reviews before buying in the cpu coolers & fans category, priced around $11.99. Read recent reviews carefully before committing.
SpecPicks Verdict
SpecPicks classifies WINSINN 40mm Fan 12V, 3D Printer Micro 12 Volt Fans 4010 Dual Ball… as a niche pick — read recent reviews before buying in the cpu coolers & fans category, based on our editorial and benchmark analysis and our ranking model that weights rating × review-volume × price-fit. WINSINN's positioning sits within the broader category mid-tier. Use the Compare tool to put it side-by-side with two or three close alternatives before clicking through to Amazon.
Common buyer scenarios for cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Pros & Cons
Pros
- ✓ Backed by WINSINN's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
Key Features
- ✔️WINSINN 40mm fan 12V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 12V, Current: 0.1A, Power: 1.2W, Speed: 6500PRM, Air Pressure: 3.92mmH₂O, Airflow: 7.1CFM, Noise: 28.2dBA
- ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation.
- ✔️Packing List: 2 x 40mm Fan 12v - Dual Ball Bearing, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm
Full Specifications
| Brand | WINSINN |
|---|---|
| Model | 2PFAN401012D |
| Voltage | 12 Volts |
| Wattage | 1.2 watts |
| Material | Plastic |
| Unit Count | 2.0 Count |
| Noise Level | 28.2 Decibels |
| Part Number | DB401012F2P |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 2 |
| Air Flow Capacity | 7.1 Cubic Feet Per Minute |
| ✔️Widely Used | Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation. |
Ready to buy?
WINSINN 40mm Fan 12V, 3D Printer Micro 12 Volt Fans 4010 Dual Ball Bearing, Brushless Cooling 40mmx10mm 2PIN (Pack of 2Pcs) is available on Amazon with Prime shipping and the full Amazon returns policy. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-06-10. Price and availability subject to change.
Related CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- How to run DeepSeek-R1 32B on AMD Radeon RX 7900 XTX
- Best GPU for Llama 70B at Home in 2026: RTX 3060 12GB Stack vs Single Workstation Card
- Self-Hosting DeepSeek on an RTX 3060 12GB: What Fits in 2026
- MiMo-V2.5-Pro Local Hardware Requirements: VRAM, Tok/s, and Quantization on Consumer GPUs
- Best Wired Mouse and Pad for FPS in 2026: Logitech G502 Hero and SteelSeries QcK
- Best Retro Gaming Storage Adapters for Win98 and DOS PCs in 2026
- OpenAI Says 'Chat Is Dead': Building a Local Agent Rig in 2026
- Framework Desktop & Ryzen AI Max+ 395 Review: Best Strix Halo Mini PCs in 2026
- Best RGB Lighting for a Gaming PC Desk: LED Strips and Case Fans Done Right
- Samsung Winds Down Memory Output Before 18-Day Strike — SSD Price Watch
- llama.cpp MTP support landed - Qwen3.6 27B at 2.44× on a Strix Halo, 2.17× on a RTX 3090 rig
- Microsoft + Nvidia Agent PCs vs a DIY RTX 3060 12GB Local-Agent Box
- Best SSD for a PS4 Pro Upgrade in 2026
- Shared ChatGPT & Claude Chats Are Spreading Malware — Run a Local LLM on a 12GB GPU Instead
- ATI Radeon 9700 Pro Install Guide: Catalyst Versions, AGP 8x Compatibility, and Period-Correct Drivers
- Best Streaming Starter Kit for New Creators in 2026
- Ryzen 7 5800X + RTX 3060 12GB: Best 1440p AM4 Build
- Best Gaming CPUs for 1080p and 1440p Builds (2026)
- GeForce FX 5900 Ultra vs Radeon 9800 Pro: The 2003 DirectX 9 Showdown Revisited
- Ryzen 7 5800X vs Ryzen 7 5700X for 2026 Budget Gaming Builds
- Best SSD for the Steam Deck and Handheld PCs (2026)
- Best Sim Racing Wheel and Shifter Combo for Beginners: Logitech G920 + Thrustmaster TH8A
- Best CPU Cooler for Ryzen 7 5800X & AM4 Overclocking (2026)
- Qwen 3.6 35B-A3B KV Cache Deep Dive: Memory, PPL, and Quantization Tradeoffs