Cisco-Linksys E2000 Advanced Wireless-N Router
Bottom line: The Cisco-Linksys E2000 Advanced Wireless-N Router ($96.25 on Amazon as of 2026-10-07): Selectable band lets you run on 2.4GHz or 5GHz to avoid congestion; main trade-off: wireless-N (802.11n) predates faster Wi-Fi 5 and Wi-Fi 6 standards.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Selectable band lets you run on 2.4GHz or 5GHz to avoid congestion
- ✓ Gigabit ports with auto-crossover (MDI/MDI-X)—no crossover cables needed
- ✓ Guest Access shares internet without exposing your PCs or data
- ✓ Wireless-N multi-radio design extends range and reduces dead spots
Cons
- ✗ Wireless-N (802.11n) predates faster Wi-Fi 5 and Wi-Fi 6 standards
- ✗ Selectable band runs one frequency at a time, not simultaneous dual-band
- ✗ 802.11n wireless speeds fall short of the Gigabit wired ports
- ✗ Aging platform—verify current firmware and security patches
Manufacturer description
From the ManufacturerIntroducing the Linksys E2000Other Linksys Products
SpecPicks Verdict
SpecPicks scored Cisco-Linksys E2000 Advanced Wireless-N Router using a rating × review-volume × price-fit model applied to published specs and reviews across the networking category. Linksys's networking lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for networking of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Selectable band 2.4 or 5GHz
- Wireless-N technology uses multiple radios to create a robust signal that travels farther and faster, with reduced dead
- All ports support Gigabit speed and Auto-Crossover (MDI/MDI-X) -- no need for crossover cables
- Guest Access feature allows your visitors access to the Internet, but not your computers or data
Full Specifications
| Brand | Linksys |
|---|---|
| Voltage | 110 volts |
| Coverage | Large Household |
| Frequency | 5 GHz |
| Model Name | E2000 |
| Unit Count | 1 Count |
| Antenna Type | Fixed |
| Connectivity | Wireless |
| Model Number | E2000 |
| Control Method | Voice |
| Connection Type | Wireless |
| Controller Type | Switch |
| Mfr Part Number | E2000 |
| Number of Ports | 4 |
| Special Feature | WPS |
| Antenna Location | Home |
| Security Protocol | WPA2 |
| Compatible Devices | Personal Computer |
| Data Transfer Rate | 300 megabits_per_second |
| LAN Port Bandwidth | 10/100/1000 (Gigabit) |
Ready to buy?
Cisco-Linksys E2000 Advanced Wireless-N Router is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Do Wireless Keyboards Work in BIOS? Building a Homelab Crash Cart in 2026
- How to Identify Your Motherboard: A Step-by-Step Guide
- vLLM vs llama.cpp for Single-User Chat on a 12GB GPU (2026)
- Qwen 3.6 35B-A3B on RTX 3060 12GB: Local LLM Throughput Guide (2026)
- NVMe vs SATA SSD for Local LLMs: Does Disk Speed Matter?
- AMD Ryzen AI Max 400 'Gorgon Halo': What 192GB of Unified Memory Unlocks for Local AI
- Open-Source Layer Brings Reflex and Anti-Lag 2 to All GPUs
- Best SATA SSD to Upgrade a PS4 Pro in 2026: Faster Loads on a Budget
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget LLM + Gaming Build
- RTX 5090 and Ryzen 7 9800X3D Benchmark Showdown: 2026 Performance Deep Dive
- Raspberry Pi OS Moves to Linux 6.18 LTS: Performance Gains for Pi 4 Owners
- RTX 5080 vs RTX 4090: Which GPU Is Best in 2026?
- Best Controllers for Steam Deck and PC in 2026
- Best Streaming Gear for New Creators in 2026
- Best Sim Racing Wheel & Pedal Setup in 2026
- Best PC Gaming Peripherals in 2026: 5 Picks for Keyboard, Audio, and Control
- Forza Horizon 6 Cuts Load Times to 4 Seconds With Advanced Shader Delivery
- Leanstral 1.5 on an RTX 3060 12GB: Local Math + Bug-Finding Benchmarks
- Raspberry Pi LLM GPU Guide: What Actually Works in 2026
- Cloudflare CEO: The Web's Future Is 'Pay to Crawl' as Bots Overtake Humans
- Best Gaming Monitors Under $400 in 2026
- Proprietary Models See Your Business: The Case for a Local Ryzen + RTX 3060 Rig
- Raspberry Pi 5 8GB Review (2026): Still the SBC to Beat
- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLM
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090