Monoprice 108535 MIDI Cable - 20 Feet - Black With Keyed 5-pin DIN Connector, Molded Connector Shells
Bottom line: The Monoprice 108535 MIDI Cable: 20-foot length spans a room without a coupler or extension; main trade-off: 20 feet is excess slack for a desktop synth-to-interface run.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 20-foot length spans a room without a coupler or extension
- ✓ Keyed 5-pin DIN ends seat only one way, so no bent pins
- ✓ Molded connector shells cover the strain point at each plug
- ✓ Soft jacket coils flat for gig-bag storage instead of fighting you
Cons
- ✗ 20 feet is excess slack for a desktop synth-to-interface run
- ✗ Standard 5-pin DIN only, no USB or TRS MIDI conversion
- ✗ Black jacket with no color coding to trace in a multi-cable rig
- ✗ Passive cable, so it cannot fix MIDI timing or buffering issues
Manufacturer description
The Monoprice 108535 MIDI cable connects synths, drum machines, and audio interfaces over a 20-foot run without forcing you to rearrange your rig around a short cable. Each end terminates in a standard keyed 5-pin DIN connector with a molded shell, so the plug seats in one orientation and the strain point stays covered instead of exposed at the solder joint. Monoprice specs the jacket as soft but durable, which matters more than it sounds: a stiff 20-foot cable fights you every time you coil it into a gig bag, while a pliable one drops flat behind a keyboard stand or runs cleanly along a…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Monoprice 108535 MIDI Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the audio & midi category before committing. On the listing's own facts, the case for it is "20-foot length spans a room without a coupler or extension"; the main trade-off is "20 feet is excess slack for a desktop synth-to-interface run". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How long is this MIDI cable?
It is 20 feet end to end, which covers stage and studio runs where a typical 6-foot MIDI cable falls short.
What connectors does it use?
A standard keyed 5-pin DIN connector on each end, with molded connector shells. It fits any gear with a conventional 5-pin MIDI In, Out, or Thru port.
Will this work with vintage synths and drum machines?
It uses the standard 5-pin DIN MIDI connector that hardware synths, drum machines, and sequencers have used since the MIDI spec was introduced, so it matches those ports directly.
Does it connect MIDI gear to a computer?
Not on its own. It terminates in 5-pin DIN on both ends, so you need a MIDI interface or a device with a 5-pin DIN port. It is not a MIDI-to-USB cable.
Is it worth the price compared to other MIDI cables?
It undercuts boutique MIDI cable pricing, which makes it a budget-friendly pick. Check the product listing for the current price and any warranty terms.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
- Feature a standard, keyed 5-pin DIN connector on each end with molded connector shells.
- The cable jacket is soft, but durable, and will last a lifetime.
- RoHS Compliant
Full Specifications
| Brand | Monoprice |
|---|---|
| Color | Black |
| Model | 108535 |
| Cable Type | MIDI |
| Item Shape | Round |
| Model Name | Monoprice 10ft MIDI Cable with 5 Pin DIN Plugs |
| Unit Count | 1 Count |
| Item Length | 20 Feet |
| Part Number | 108535 |
| Connector Type | Midi |
| Number of Pins | 5 |
| Outer Material | Synthetic material (plastic or rubber) |
| Maximum Voltage | 15 Volts (DC) |
| Number of Items | 1 |
| Special Feature | Durable |
| Connector Gender | Male-to-Female |
| Specification Met | RoHS |
| Compatible Devices | Personal Computer |
| Included Components | MIDI Cable - 20 Feet - Black With Keyed 5-pin DIN Connector |
| Indoor Outdoor Usage | Indoor, Outdoor |
Ready to buy?
Monoprice 108535 MIDI Cable - 20 Feet - Black With Keyed 5-pin DIN Connector, Molded Connector Shells is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Audio & MIDI
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Gunnir Arc B580 vs RTX 5090D on DeepSeek: The Budget AI-Rig Upset Explained
- Microsoft Mirage and Persistent-Memory Video Gen: How Much VRAM You Actually Need
- Ollama on a 12GB RTX 3060: Best Models and tok/s in 2026
- CompactFlash-to-IDE Boot Drive: The Silent Win98 Build Upgrade
- Best CPU Cooler for AM4 + Ryzen 5000 in 2026
- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026
- Grok 4.5 at $0.31 a Task: When Cheap Cloud Beats a Local Build
- Best Mac for running local LLMs in 2026
- Best Classic Retro RPGs to Play in 2026 (Top 15)
- Best GPU for Training CNNs at Home in 2026: The RTX 3060 12GB Case
- 007 First Light on Steam Deck: Performance & Best Settings
- Ryzen 7 5700X + RTX 3060 12GB: A Balanced 1440p Build in 2026
- Sound BlasterX G6 on a Retro PC: Bringing Modern DAC Quality to Pentium III and Athlon XP Builds
- Best Work-From-Home Kit for Gamers in 2026
- Local PDF-to-Audiobook on a Raspberry Pi 5: Kokoro 82M + Qwen + llama.cpp
- Do you need a shifter for sim racing? Logitech G29 + Thrustmaster TH8A
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- Moving Files On and Off a Retro PC: CompactFlash + IDE-to-USB
- Local LLM Autocomplete + Agentic Coding on 16GB VRAM
- Best SATA SSDs for Gaming and Emulation in 2026
- Samsung's 360Hz 4K QD-OLED vs Budget 4K Gaming Monitors: Is the Premium Worth It?
- Best SteamOS Handheld Gaming PCs in 2025: What to Buy
- Best CPU for Streaming and Gaming Under $300: Ryzen 7 5800X vs 5700X vs 5600G
- Corsair LL120 RGB vs Noctua NH-U12S: Cooling a 5800X for All-Day Gaming
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090