Monoprice MIDI Cable - 5 Pin DIN Connectors, Shielded, Molded Connector Shells, 28 AWG, 10 Feet, Black
As an Amazon Associate, SpecPicks earns from qualifying purchases.
*Price sourced from Amazon.com. Last updated 2026-04-20. Price and availability subject to change.
Bottom line: The Monoprice MIDI Cable - 5 Pin DIN Connectors, Shielded, Molded Connector Shells, 28 AWG, 10 Feet, Black is a specs-and-price decision rather than a crowd-consensus one in the audio & midi category, priced around $8.99. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.
The Monoprice MIDI Cable connects any two pieces of gear that speak MIDI over the standard keyed 5-pin DIN interface: vintage synths, drum machines, samplers, MIDI interfaces, and modern controllers with legacy DIN ports. At 10 feet, it spans a typical two-tier keyboard stand or a desk-to-rack run without forcing you to daisy-chain adapters. The 28 AWG conductors are shielded to keep clock and note data clean alongside power supplies and audio cables in a crowded rig, and molded connector shells take the strain at the plug so repeated setup and teardown does not loosen the pins. The jacket…
SpecPicks Verdict
SpecPicks scored Monoprice MIDI Cable - 5 Pin DIN Connectors, Shielded, Molded… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the audio & midi category. Monoprice's audio & midi lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for audio & midi of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Frequently Asked Questions
Will this work with my vintage synth or drum machine?
Yes, if the gear uses standard 5-pin DIN MIDI ports. Both ends are standard keyed 5-pin DIN connectors, which is the same MIDI interface used on classic synths, drum machines, samplers, and hardware sequencers.
How long is the cable, and is 10 feet enough for a two-tier keyboard rig?
It is 10 feet. That typically covers a two-tier keyboard stand or a desk-to-rack run. For longer distances you would need a second cable or a longer length from the Monoprice MIDI range.
Does it work with USB MIDI or TRS mini-MIDI devices?
No. This is a 5-pin DIN to 5-pin DIN cable only. Devices that use USB-MIDI or 3.5mm TRS MIDI require a separate adapter or interface, which is not included.
Is the cable shielded enough to run next to power cables?
It is shielded and uses 28 AWG conductors, which is intended to protect MIDI data in a crowded rig. Monoprice does not publish the specific shield type in this listing.
What warranty does Monoprice offer on this cable?
Monoprice states a lifetime warranty on its cables. Check the product listing for the current warranty terms and claim process before purchase.
Pros & Cons
Pros
- ✓ Feature a standard, keyed 5-pin DIN connector on each end with molded connector shells.
- ✓ Backed by Monoprice's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
Key Features
- Buy with confidence: with Monoprice lifetime on all cables, you can rest assured we stand behind our products and our customers.
- Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices.
- Feature a standard, keyed 5-pin DIN connector on each end with molded connector shells.
- The cable jacket is soft, but durable, and will last a lifetime.
- Rohs compliant
Full Specifications
| Brand | Monoprice |
|---|---|
| Color | Black |
| Gauge | 28.0 |
| Model | 108533 |
| Cable Type | MIDI Cable |
| Item Shape | Round |
| Model Name | 10ft MIDI Cable with 5 Pin DIN Plugs |
| Unit Count | 1 Count |
| Item Length | 10 Feet |
| Part Number | 108533 |
| Connector Type | Midi |
| Number of Pins | 5 |
| Outer Material | Plastic |
| Maximum Voltage | 15 Volts |
| Number of Items | 1 |
| Special Feature | Durable |
| Connector Gender | Male-to-Female |
| Specification Met | RoHS |
| Compatible Devices | Musical Instrument |
| Buy with confidence | with Monoprice lifetime on all cables, you can rest assured we stand behind our products and our customers. |
Ready to buy?
Monoprice MIDI Cable - 5 Pin DIN Connectors, Shielded, Molded Connector Shells, 28 AWG, 10 Feet, Black is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-04-20. Price and availability subject to change.
Related Audio & MIDI
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- AMD Ryzen 9 9950X3D2 Runs Faster on Linux Than Windows 11
- Build a Silent Windows 98 Boot Drive with CompactFlash + IDE
- OpenAI Codex Price War vs Running a Local Coding Model on an RTX 3060
- AI-Driven Sound Blaster Driver Install on WinXP via Vision LLM
- Raspberry Pi Projects on GitHub: 2025 Guide
- Best Cooling for AMD Ryzen Overclocking in 2026
- Build a Wall-Mounted Raspberry Pi 4 Arcade Cabinet: 3D-Printed Case, SSD Boot, Real BOM
- Corsair Launches Lightweight Budget HS35 v3 Gaming Headset
- Local AI Server LLM Setups 2025: What Hardware Matters
- Build a RetroPie Handheld with the Raspberry Pi Zero W in 2026: Full BOM + Setup
- Can a Raspberry Pi 4 8GB Run a Local LLM in 2026? Phi & TinyLlama tok/s
- RTX 4090 vs RX 7900 XTX
- 180Hz 1440p Gaming Monitors Hit Entry-Level Pricing
- Best Sim Racing Wheel for PC and Console in 2026
- Ideogram 4.0 Open Weights: Running It Locally on an RTX 3060 12GB
- Why FurMark Has a 'GPU Killer' Reputation
- DeepSeek 4 Flash on 128GB MacBook: Local Inference Throughput Reality Check
- Ryzen AI Max 385 Mini PC: Specs and What It's Really For
- Asus ROG Xreal R1: 240Hz AR Glasses Hit Review
- 8BitDo Pro 2 on Win98 SE and WinXP: Mapping a Modern Bluetooth Pad to DOSBox, Glide Games, and…
- Best Budget GPU for CNN & Vision Inference 2026: RTX 3060 12GB
- RTX 3060 12GB vs RTX 4060: Best Budget GPU for 1080p Gaming + Local AI
- Which GPU Runs Which LLM? A Per-Model VRAM Compatibility Guide (2026)
- How to run Qwen 3 32B on AMD Radeon RX 7900 XTX
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090