Arducam for Raspberry Pi Zero Camera Module, 5MP OV5647 1080P Webcam on Raspbian (Cables in 2 Kinds)
Bottom line: The Arducam for Raspberry Pi Zero Camera Module ($9.49 on Amazon as of 2026-10-06): 5MP OV5647 sensor captures 1080P video and sharp stills; main trade-off: 5MP OV5647 is an older, lower-resolution sensor.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 5MP OV5647 sensor captures 1080P video and sharp stills
- ✓ Includes 2 cables for Pi Zero and Model A/B connectors
- ✓ Works natively with all Raspberry Pi models
- ✓ Small form factor suits security cams and 3D-printer monitoring
Cons
- ✗ 5MP OV5647 is an older, lower-resolution sensor
- ✗ 1080P frame rate described only as decent, not high-speed
- ✗ Needs manual camera activation on Raspbian via paper guide
- ✗ Only Raspbian setup is documented, not other OSes
Manufacturer description
Pi compatible - Work natively with all Raspberry Pi models for your new project or drop-in replacement Both cables - 2 cables included so you can switch between the camera connectors for the Pi Zero and Model A&B series Specs - 5MP 1080P OV5647, crisp photos, and sharp videos with a decent frame rate
SpecPicks Verdict
SpecPicks scored Arducam for Raspberry Pi Zero Camera Module using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. Arducam's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Pi compatible - Work natively with all Raspberry Pi models for your new project or drop-in replacement
- Both cables - 2 cables included so you can switch between the camera connectors for the Pi Zero and Model A&B series
- Specs - 5MP 1080P OV5647, crisp photos, and sharp videos with a decent frame rate
- Easy to use – Easy setup with paper instructions to help you activate the camera feature on Raspbian.
- Application: Small form factor for a tiny home video security system, monitoring 3D printer or other camera projects. Feel free to contact Arducam if you need any help with the product
Full Specifications
| Brand | Arducam |
|---|---|
| Color | Extra Pi Zero cable included |
| Model | B0033+B0087 |
| Warranty | 6 months |
| UnitCount | 1 |
| Manufacturer | Arducam |
| ItemPartNumber | UCT_B0033+B0087 |
Ready to buy?
Arducam for Raspberry Pi Zero Camera Module, 5MP OV5647 1080P Webcam on Raspbian (Cables in 2 Kinds) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Read our analysis
SpecPicks coverage that features this Single Board Computer.
Related Single Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Arcade Fight Stick & Controller for PlayStation Fighting Games (2026)
- Anker's Thus Chip Claims 150x AI Boost: No Benchmarks Yet
- Best SSD for Steam Deck and Handheld Gaming Storage Expansion 2026
- Best Sim Racing Wheel and Shifter Combo for Beginners: Logitech G920 + Thrustmaster TH8A
- Best Classic Retro RPGs to Play in 2026 (Top 15)
- Tencent Hunyuan-MT 440MB On-Device Translator: Which Phones and SBCs Can Actually Run It?
- Logitech Prime Day Peripheral Deals Hit 47% Off — What Is Actually Worth Buying
- RTX 5090 and Ryzen 7 9800X3D Benchmark Showdown: 2026 Performance Deep Dive
- CPU-Only LLM Inference on a Ryzen 7 5800X: When 32GB of RAM Beats a 12GB GPU
- Best Controller for RetroPie & Pi Emulation: SN30 Pro vs DualSense
- Crucial BX500 vs Samsung 870 EVO for an Emulation Box
- Steam Deck OLED vs ROG Xbox Ally X: Which Handheld Wins?
- Apple Intelligence Gets a Second Shot With Google and Nvidia Help
- Raspberry Pi 5 IOMMU Driver Heads to the Mainline Linux Kernel
- Open-Source NVK Adds DLSS: What RTX 3060 Owners Get
- Best Sim Racing Wheel for Forza on Xbox + PC 2026
- Period-Correct 1999 LAN Rig: Pentium III, Voodoo3 3000, Sound Blaster
- Tesla Capped AI Spend at $200/Week — Build a Local Inference Box for Less
- GeForce 4 Ti 4600 AGP in 2026: Period-Correct Win98 Install Guide
- CompactFlash to IDE Adapter Won't Boot on Windows 98: Troubleshooting Guide 2026
- Best 27-inch 4K Monitor for PC and Console: Odyssey vs KOORUI
- Best Cheap Raspberry Pi Alternatives in 2025
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5070
- Raspberry Pi LLM Cluster: What It Can (and Can't) Do
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090