StarTech.com
StarTech 6in Cat6a Snagless Ethernet Cable, Black (C6ASPAT6INBK)
Bottom line: The StarTech.com StarTech 6in Cat6a Snagless Ethernet Cable ($11.28 on Amazon as of 2026-10-21 04:23 UTC): Rated for 10 Gigabit Ethernet, ETL verified to ANSI/TIA-568.2-D; main trade-off: 6-inch length only reaches adjacent ports, not desks or other rooms.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Rated for 10 Gigabit Ethernet, ETL verified to ANSI/TIA-568.2-D
- ✓ 6-inch (15 cm) length removes slack at patch panels and in-rack links
- ✓ Shielded STP pairs and RJ45 plugs reduce crosstalk and EMI/RFI noise
- ✓ Supports up to 100W PoE per IEEE 802.3bt for cameras and VoIP phones
Cons
- ✗ 6-inch length only reaches adjacent ports, not desks or other rooms
- ✗ Thin 26 AWG stranded wire suits patching, not long structured runs
- ✗ Shielding pays off fully only with shielded, grounded jacks and ports
- ✗ PVC jacket; listing names no plenum (CMP) rating for air-handling spaces
Manufacturer description
The StarTech.com C6ASPAT6INBK is a 6-inch (15 cm) black Cat6a Ethernet cable built for the shortest runs in your network. Use it to jump from a switch to a patch panel, link servers in the same rack, or connect a hub where a longer cord would only add clutter. It is rated for 10 Gigabit Ethernet. Each cable is individually tested to ANSI/TIA-568-B.2-10 Category 6 requirements, and it is ETL verified to meet ANSI/TIA-568.2-D. Inside are four shielded twisted pairs (STP) of 26 AWG stranded copper in a PVC jacket. Shielded RJ45 connectors help limit near-end crosstalk and EMI/RFI noise, and…
SpecPicks Verdict
SpecPicks scored StarTech.com StarTech 6in Cat6a Snagless Ethernet Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the retro networking cards category. StarTech.com's retro networking cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro networking cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Can this StarTech 6-inch Cat6a cable handle 10 Gigabit Ethernet?
Yes. StarTech.com rates the C6ASPAT6INBK for 10GbE. Each cable is individually tested to ANSI/TIA-568-B.2-10 Category 6 requirements and ETL verified to meet ANSI/TIA-568.2-D.
Does this cable support Power over Ethernet?
Yes. The listing says its 26 AWG stranded copper conductors and UL-rated wiring (E132276-A) support up to 100W PoE and are IEEE 802.3bt compliant. That covers devices like VoIP phones and security cameras.
Is a 6-inch Ethernet cable long enough for my setup?
It is designed for very short connections: switch to patch panel, server to switch within the same rack, or links between adjacent devices. At 15 cm, it will not reach a desk, a wall jack, or another room.
Will it work with older 10/100 network cards and switches?
StarTech.com lists compatibility with multi-speed 10Base-T through NBASE-T equipment, so it connects to older Fast Ethernet gear as well as current 10GbE ports. The link runs at the speed of the slower device.
Key Features
- HIGH PERFORMANCE CAT6A ETHERNET CABLE: 100% copper for consistent & error-free 10 gigabit connection. Individually Tested complies with ANSI/TIA-568-B.2-10 Category 6 requirements; ETL Verified to meet ANSI/TIA-568.2-D standards
- PROTECT YOUR NETWORK: Shielded RJ45 connectors minimize Near-End Crosstalk (NEXT) & protect against noise & electromagnetic (EMI/RFI) interference; Compatible w/ multi-speed 10Base-T/NBASE-T generation
- SPECS: 10 GbE; Length: 6 in (15 cm); Color: Black; Structure: 4 Pair STP; Connector: Snagless; Jacket Type: PVC; Wire Gauge: 26 AWG Copper; Wiring Standard: ANSI/TIA-568-B.2-10; Warranty: Lifetime
- POE SUPPORT: 26 AWG stranded copper conductors & UL Rated Wiring (E132276-A) supports up to 100W for PoE devices like VOIP phone & security systems. IEEE 802.3bt & DTE power compliant prevents cable heating up
- QUALITY CONSTRUCTION: 50-micron gold-plated connectors for clear signal & to stop rust/corrosion. Snagless connector enables easy installation & flexible disconnection of patch cord in wiring conduits
Full Specifications
| Brand | StarTech.com |
|---|---|
| Color | Black |
| Gauge | 26 |
| Model | C6ASPAT6INBK |
| Frequency | 500 MHz |
| Cable Type | Ethernet |
| Item Shape | Round |
| Model Name | C6ASPAT6INBK |
| Unit Count | 1 Count |
| Item Length | 6 inches |
| Part Number | C6ASPAT6INBK |
| Connector Type | RJ45 |
| Item Type Name | StarTech.com C6ASPAT6INBK Cat6a Shielded Patch 6 in, Black, Snagless RJ45 Cable , Ethernet Cord |
| Number of Pins | 8 |
| Outer Material | Polyvinyl Chloride (PVC) |
| Number of Items | 1 |
| Special Feature | High Speed |
| Connector Gender | Male-to-Male |
| Specification Met | 6" |
| Compatible Devices | Server |
Ready to buy?
StarTech 6in Cat6a Snagless Ethernet Cable, Black (C6ASPAT6INBK) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Retro Networking Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- IPEX-LLM + Ollama in Docker: Running Local Models on Intel GPUs
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5080
- BOSGAME VTA-439: AMD Ryzen AI 9 HX 470 Mini PC for Linux
- LG UltraGear 52G930B 52-Inch 5K Gaming Monitor Review
- Intel Axes BigDL/IPEX-LLM: Where Local Inference Goes Now
- Data Center CPU Demand Surge: AI Agents and the GPU Ratio Shift
- Intel Arc for Stable Diffusion: ComfyUI + A1111 setup (2026)
- Crucial BX500 vs Samsung 870 EVO: Best 1TB SATA SSD for Game Storage
- Best Raspberry Pi Starter Kits for Beginners (2026)
- Ryzen 5 5600X vs Ryzen 7 5800X: CPU-Only Qwen2.5 14B (2026)
- Build Your Own Air Quality Monitor: Skip the $300+ Price Tag
- Intel Arc Pro B60 AI Performance: 24GB VRAM Explained
- Raspberry Pi OS Moves to Linux 6.18 LTS — Real Performance Gains
- Apple Intelligence Gets a Second Shot With Google and Nvidia Help
- $1,500 Gaming PC Build 2026: Parts, Cost, 1440p FPS
- Best Racing Wheel Under $300: Logitech G29 vs HORI Force Feedback
- Best AM4 CPU Cooler in 2026: 5 Picks for Ryzen Builds
- Best Steam Deck Dock for 4K Gaming on a TV in 2026
- Best CPU Cooler for Ryzen 7 5800X Overclocking in 2026
- Intel llm-scaler-vllm 1.4: Arc Pro B70 Inference Support Lands
- Kimi K3 Just Launched: What You Can (and Can't) Run Locally Instead
- Is the RTX 3060 12GB Still a Good 1080p Gaming GPU in 2026?
- Best Wired Gear for Tournament-Legal LAN Play in 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090