Cable Matters VGA Extension Cable, VGA Male to Female, 10ft | Not Dual Male, Not for DB9/Serial Use
Bottom line: The Cable Matters VGA Extension Cable: Male-to-female HD15 extends a VGA cord you already own, no full re-run; main trade-off: not male-to-male, so it cannot connect a PC to a monitor on its own.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Male-to-female HD15 extends a VGA cord you already own, no full re-run
- ✓ Handles 1080p plus SVGA, XGA, UXGA, and WUXGA 1920x1200 modes
- ✓ Integrated ferrite cores cut crosstalk, RFI, and EMI over the 10ft run
- ✓ Hex nuts mate with existing thumbscrews so the joint will not drift loose
Cons
- ✗ Not male-to-male, so it cannot connect a PC to a monitor on its own
- ✗ Will not work on DB9 serial ports despite the similar D-sub shell
- ✗ Analog only, capped at 1080p/WUXGA, no digital or 1440p+ support
- ✗ 10ft is the listed length, so longer runs need chaining or a different cable
Manufacturer description
The Cable Matters VGA Extension Cable solves a specific problem: your existing VGA cable is three feet short of where the monitor needs to sit. This 10-foot male-to-female HD15 extender plugs into the end of a VGA cord you already own, letting you move a display across the room, reach a projector ceiling mount, or route cable behind a desk without pulling the whole run. It carries analog video up to 1080p, and supports SVGA (800x600), XGA (1024x768), UXGA (1600x1200), and WUXGA (1920x1200) modes, which covers most CRT and early LCD panels as well as modern LED-lit monitors running a legacy…
SpecPicks Verdict
SpecPicks scored Cable Matters VGA Extension Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the display & crt accessories category. Cable Matters's display & crt accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for display & crt accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Can I use this to connect my computer directly to a monitor?
No. This is an extension cable with a male end and a female end, so it lengthens an existing VGA cord. A direct PC-to-monitor run needs a VGA male-to-male cable, sold separately.
Will this work with a DB9 serial port?
No. Cable Matters states explicitly that this 15-pin DB-15 cable is not compatible with DB9 serial ports, even though the D-sub connectors look similar.
What is the maximum resolution it supports?
Up to full HD 1080p, including 800x600 SVGA, 1024x768 XGA, 1600x1200 UXGA, and 1920x1200 WUXGA. It carries analog video only, so there is no digital or 1440p-and-above path.
Does it reduce picture quality over the extra 10 feet?
Integrated ferrite cores are built in to minimize crosstalk and suppress RFI and EMI on the run.
Will it screw into my existing cable and monitor securely?
Yes. The female end carries hex nuts that mate with the thumbscrews on a standard VGA cable, so the two lock together rather than relying on friction.
Key Features
- Compatibility Note: This is a VGA extension cable with 15-pin DB-15 Male to Female connectors, designed for extending analog video signals. Not a VGA Male-to-Male cable (not for direct PC-to-monitor connections) — a VGA male-to-male cable is needed (sold separately). Not compatible with DB9 serial ports.
- VGA video extension cable extends the length of an existing HD15 VGA cord; Connect to a monitor across the room or attach to an existing male to male VGA cable in a hard-to-reach location behind a desk with this VGA monitor cord extender; Extend a KVM switch VGA monitor cable with this convenient computer extension cord for VGA
- Monitor cable extension cord supports video resolutions up to full HD 1080p, including 800x600 (SVGA), 1024x768 (XGA), 1600x1200 (UXGA), and 1920x1200 (WUXGA); Connect to an LED-lit and LCD HD monitor with this SVGA extension cable
- Integrated ferrite cores on this male to female VGA cable minimize crosstalk, suppress noise, and protect against radio frequency interference (RFI) and electromagnetic interference (EMI)
- Hex nuts on the VGA male to female extension cable mate with the thumb screws on the existing VGA cable to provide a secure connection; Flexible VGA extender cord extends an RGB cord from a monitor or projector in seconds
Full Specifications
| Brand | Cable Matters |
|---|---|
| Cable Type | VGA |
| Compatibility | PC, Switch |
| Connector Type | VGA |
| Special Feature | Magnetic |
| Compatible Devices | Monitor, PC, Projector |
Ready to buy?
Cable Matters VGA Extension Cable, VGA Male to Female, 10ft | Not Dual Male, Not for DB9/Serial Use is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Display & CRT Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best SSD for a Steam Deck or ROG Ally Upgrade (2026)
- Noctua NH-U12S vs DeepCool AK620 for the Ryzen 7 5800X
- Best PC Game Controllers for 2026: 5 Picks Ranked
- Logitech G29 / G920 Not Detected on Windows 11: Step-by-Step Driver Fix Guide (2026)
- Quietest AM4 CPU Cooler in 2026: Noctua NH-U12S vs DeepCool AK620 vs AC Infinity
- Best Gaming Setup for Kids and Teens in 2026: 5 Picks
- Glide vs OpenGL vs Direct3D: The PC Gaming API War 1996-2003, Benchmarked
- AI-Driven Sound Blaster Driver Install on WinXP via Vision LLM
- Top 20 Most Played Steam Deck Games: April 2026
- Glide vs OpenGL vs Direct3D: The API War That DirectX 9 Ended
- Handheld Gaming PCs Ranked: 2025's Top Picks Compared
- Can You Game While Ollama Runs? RTX 3060 12GB VRAM Contention
- Inkling 975B: Thinking Machines' Open-Weight Speech Model, Explained
- Run Chrome's Tiny Gemini Nano AI on PC Without a GPU
- Best PC Cooling Fans for High-Airflow Gaming PCs in 2026
- AMD Ryzen 9 9950X3D2 Runs Faster on Linux Than Windows 11
- 8BitDo Pro 2 on Win98 SE and WinXP: Mapping a Modern Bluetooth Pad to DOSBox, Glide Games, and…
- Forza Horizon 6 on Steam Deck: Best Settings, Dock & Storage in 2026
- 3D-Printed Retro PC Case Fits ITX Board, ATX PSU
- Raspberry Pi 5 Projects Worth Building in 2026
- Best Retro PC Building Tools & Adapters 2026: The Kit That Ships the Build
- How Many CPU Cores Does a Local-LLM Rig Actually Need?
- Samsung Winds Down Chip Output Before Strike — Brace for SSD Prices
- Retro Console Modding Services: What to Expect in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090