CRJ Electronics CRJ 4-Pin Molex to Dual 15-Pin SATA Power Adapter Cable
Bottom line: The CRJ 4-Pin Molex to Dual 15-Pin SATA Power Adapter Cable: Powers two SATA drives from one spare 4-pin Molex peripheral lead; main trade-off: legacy 4-pin Molex connector is low-tolerance and needs careful pin alignment.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Powers two SATA drives from one spare 4-pin Molex peripheral lead
- ✓ All-black connectors and dense black sleeving hide the run in a windowed case
- ✓ 12-inch (30cm) length reaches drive cages without coiling slack
- ✓ Adds SATA power to older ATX supplies that shipped Molex-only
Cons
- ✗ Legacy 4-pin Molex connector is low-tolerance and needs careful pin alignment
- ✗ Only 12 inches (30cm) end to end, tight for top-mounted or far-side drive bays
- ✗ Two SATA outputs share a single Molex rail, so drive count per lead is capped
- ✗ Sleeving stiffens the cable and limits tight bends behind the motherboard tray
SpecPicks Verdict
SpecPicks scored CRJ 4-Pin Molex to Dual 15-Pin SATA Power Adapter Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. CRJ Electronics's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- This adapter cable allows you to power any two 15-pin SATA devices with a 4-pin peripheral molex connection from your ATX power supply.
- The premium construction of this cable features all black connectors and high density black sleeving for minimal wire visibility.
- Note: due to the low-tolerance nature of the legacy 4-pin connector it's important to align the pins during connector insertion.
- Cable length (including connectors) is 12 inches (30cm)
Full Specifications
| Note | due to the low-tolerance nature of the legacy 4-pin connector it's important to align the pins during connector insertion. |
|---|---|
| Brand | CRJ Electronics |
| Color | Black |
| Model | 4025 |
| Cable Type | SATA |
| Item Shape | Round |
| Model Name | Molex-to-Dual-SATA |
| Unit Count | 1 Count |
| Item Length | 1 Feet |
| Part Number | 4345032970 |
| Connector Type | 4-pin Male Molex |
| Number of Pins | 4 |
| Maximum Voltage | 12 Volts |
| Number of Items | 1 |
| Special Feature | Sleeved |
| Connector Gender | Male-to-Female |
| Specification Met | Ellipsis, RoHS, {'CE': 'compliant'}, {'UL': 'compliant'} |
| Compatible Devices | PC |
| Data Transfer Rate | 6 Gigabits Per Second |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Full listing title | CRJ 4-Pin Molex to Dual 15-Pin SATA Power Adapter Cable - 12-inch (30cm), Black Sleeved - Power Two SATA Hard Drives and SSDs from a 4-Pin Peripheral Molex ATX Power Supply Connection |
Ready to buy?
CRJ 4-Pin Molex to Dual 15-Pin SATA Power Adapter Cable - 12-inch (30cm), Black Sleeved - Power Two SATA Hard Drives and SSDs from a 4-Pin Peripheral Molex ATX Power Supply Connection is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Best Streaming Starter Kits in 2026: Mic, Light, Capture, and the One-Box Builds
- Installing 3dfx Voodoo Glide Drivers on Windows 98 in 2026
- How to run DeepSeek-R1 32B on Apple M4 Max
- CompactFlash to IDE Imaging for Win98: Troubleshooting Common Failures
- Double RTX 3070 VRAM: What's Actually Possible in 2026
- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLMs
- Best Game Controller in 2026: 5 Picks for PC, Console and Retro
- How to run Qwen 3 32B on NVIDIA GeForce RTX 3090
- Stable Diffusion WebUI Forge in 2026: Faster Inference on the RTX 3060 12GB
- IPEX-LLM + Ollama in Docker on Intel Arc: The 2026 Setup Guide
- Best Gaming Controllers for PC in 2026: 5 Picks Tested Across Genres
- 'Count Anything' AI Model Does Object Counting — Harder Than It Sounds
- DeepCool AK620 vs Noctua NH-U12S for the Ryzen 7 5800X
- What Rig Runs an AI Agent Locally? Building for the Agent Era
- Best Game Controller for PC in 2026: 5 Picks Tested Against Real Use
- Ryzen 7 5800X3D vs Core i7-14700K: The DDR4 Gaming Faceoff for 2026 Builders
- Period-Correct 1999 Voodoo3 + Pentium III LAN Party Build Guide
- Ryzen 7 5800X vs 5700X: Best 8-Core AM4 CPU 2026
- Nintendo Switch Steering Wheel V2: A 3D-Printed Accessibility Controller
- Best Internal SSDs Under $100 in 2026
- Microsoft + Nvidia Agent PCs: Hardware to Run Agents Locally
- Sound Blaster Audigy 2 ZS vs Aureal Vortex 2: The Last Great Win98 Audio Battle
- AMD Challenges Nvidia DGX Spark with $3,999 Ryzen AI Halo
- ViewSonic VX2730D-4K Review: 4K Gaming at 163 PPI and 144Hz
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090