IDE to SATA SATA to IDE ATA ATAPI Serial HDD Mutual Converter Adapter W/Cable

SpecPicks Verdict

SpecPicks scored IDE to SATA SATA to IDE ATA ATAPI Serial HDD Mutual Converter… using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. IDE to SATA SATA to IDE ATA ATAPI Serial HDD Mutual Converter Adapter W/ Cable's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

• Description: NEW IDE HDD to SATA Serial ATA Converter Adapter This Adapter Does it All, SATA Hard Drive To IDE Converter or IDE Drive to SATA Host Converter. This is a Bi-Direction converter for serial and parallel ATA translation. It includes the Serial ATA PHY , Link, Transport and Parallel ATA (application layer) controller. The Serial ATA physical, link and transport layers are compliant to serial ATA I/II . This Converter support a 3GHz Data Rate. With LED indicated
• ower. Easy install & no Driver Needed. Serial ATA 1.0/2.0 Specification Compliant. Automatic Serial ATA 1.5 Gbps Speed negotiation. ATA /ATAPI PIO mode 0 to 4. ATA / ATAPI Ultra DMA of Transfer rate 16.7 , 25, 33, 48, 66, 100, 133 , 150, 300MB/s. ATA /ATAPI LBA48 addressing node associated with 2-byte sector count. Support Serial ATA hot-Plug. Ultra low power Consumption. Work for both AC and DC couple between the transmitter and the receiver. Provide Specified OOB
• ignal detection and Transmission. Support Spread Spectrum Clocking to reduce EMI. Support Partial / Slumber Power Management. Provide adjustable TX signal amplitude and pre-emphasis level. Slave Support. Support for Windows 98/SE/ME/2000/XP/Vista.

Full Specifications

Ready to buy?

IDE to SATA SATA to IDE ATA ATAPI Serial HDD Mutual Converter Adapter W/Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Storage Adapters

⚔️ Compare

StarTech.com

StarTech SATA to USB Adapter, USB 5Gbps, 2.5in SATA III (USB3S2SAT3CB)

$9.90

🛒 Check Price on Amazon Details

⚔️ Compare

UGREEN

2.5" Hard Drive Enclosure USB 3.0 to SATA III Adapter,5Gbps

$9.49

🛒 Check Price on Amazon Details

⚔️ Compare

BENFEI

SATA to USB Cable, 2in1 USB-C/USB 3.0 to SATA III Hard Driver Adapter Compatible for 2.5 inch HDD and SSD

$6.99

🛒 Check Price on Amazon Details

⚔️ Compare

U-Reach

IDE to SATA Adapter, 2-Pack

🛒 Check Price on Amazon Details

⚔️ Compare

Leslied

JM20330 Chipset 3.5" HDD SATA to IDE/PATA Converter Card Adapter Converter Cable (SATA DVD Burner to IDE…

🛒 Check Price on Amazon Details

⚔️ Compare

VCOM

USB 2.0 to SATA/IDE Adapter (CU813)

🛒 Check Price on Amazon Details