Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30" X 48" (2.5'x 4')
Bottom line: Per its Amazon listing, the Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30" X 48": top layer Static-“Dissipative Layer” ( 0.5mm thickness ); bottom Layer Conductive layer (1.5mm thickness).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Top layer Static-“Dissipative Layer” ( 0.5mm thickness )
- ✓ Backed by Scientific Americas's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
30" X 48'' With 2 MM Thickness, Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance. Feature two layers rubber; the top layer is dissipative and the bottom layer is conductive. Available in Blue. Dual Bench Ground Mount for Single Conductor Wrist Straps. This is a good complement to our mat grounding cord as it will install under the work bench and provide long term solution. It also provides more workable surface area ( the mat grounding usually is mounted on the corner, top left or right of the mat).
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30" X 48", so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance
- Top layer Static-“Dissipative Layer” ( 0.5mm thickness )
- Bottom Layer Conductive layer (1.5mm thickness)
- Resistance: RTT:3.8 x 10^6 to 1 x 10^8, RTG:2.4 x 10^7 to 1x 10^8, Surface:<10^4 to <10^7
- Heat resistance (600oF, 10 sec no smell, no melt)
Full Specifications
| Brand | Scientific Americas |
|---|---|
| Color | Blue |
| Display | lcd or led |
| Resistance | RTT:3.8 x 10^6 to 1 x 10^8, RTG:2.4 x 10^7 to 1x 10^8, Surface:<10^4 to <10^7 |
| Unit Count | 1 Count |
| Display Type | lcd or led |
| Model Number | XN-2YH4-AEA9 |
| Item Type Name | Mat |
| Included Components | Mat |
| Temperature Stability | 600 degrees_fahrenheit |
| Manufacturer Part Number | 2050-30X48BB |
| Full listing title | Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30" X 48" (2.5'x 4') - 0.08" Thick- with Dual Bench and Wrist Strap-Blue |
Ready to buy?
Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30" X 48" (2.5'x 4') - 0.08" Thick- with Dual Bench and Wrist Strap-Blue is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi 5 Price Guide: What You'll Actually Pay
- Best Buy Cuts $900 Off an Asus 64GB Gaming Laptop — Is a Desktop Smarter?
- Intel Arc Pro B70 vLLM Support Lands — vs RTX 3060 12GB
- Qwen 3.6 35B-A3B on a 16GB GPU: RTX 5060 Ti vs RX 9060 XT Quant Table
- Self-Hosting Jellyfin on a Ryzen 5 5600G: 4K Transcode on the Cheap
- Linux Gaming Keeps Getting Faster: Windows APIs Land in the Kernel
- Intel llm-scaler-vLLM 1.4 with Arc Pro B70: Local Inference vs RTX 3060 12GB
- How Many CPU Cores Does a Local-LLM Rig Actually Need?
- Air vs AIO for the Ryzen 7 5800X: is the Noctua NH-U12S enough?
- LLM-Driven Driver Install on Windows 98, 2000, and XP: Vision-LLM Walkthroughs from a 4-PC Retro Fleet
- Inside the Intel 8087: Decapping a 1980 Math Coprocessor's Microcode
- Q4_K_M Is Fine for Chat, a Trap for Agents: KV Cache Quant Math for Local Coding
- Renting AI Compute vs Running It Home: The RTX 3060 Math
- Pentium III Tualatin Overclocking and Slotket Build Guide: The Forgotten King of Socket 370
- Best GPU for Running Llama 3 8B Locally Under $350 (2026)
- Meta Is 'Token Managing' Now: Cut Local-LLM Cost on a Single RTX 3060
- xAI Open-Sources Grok-Build: Running Agentic Coding on Your Own GPU
- Best Budget GPU for Local LLMs Under $300 in 2026: Why the RTX 3060 12GB Still Wins
- Modern PC Builds vs Period-Correct Retro Rigs: A 2026 Comparison
- FIDECO vs Unitek SATA/IDE-to-USB Adapters: Imaging and Rescuing Vintage Drives in 2026
- Raspberry Pi Zero W Projects for Beginners in 2026
- Qwen3 4B on Raspberry Pi 4 8GB vs Ryzen 5 5600G: Which Cheap Always-On Box Wins?
- Claude Code Artifacts Just Shipped: What It Adds, and the Local Aider Alternative
- GeForce Tensor-Throttle Unlock: RTX 3060 12GB vs RTX 4090 for Local LLMs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090