AVLT
AVLT Dual Monitor Arm Wall Mount for 13-32" Screens
Bottom line: The AVLT Dual Monitor Arm Wall Mount for 13-32" Screens ($71.99 on Amazon as of 2026-10-07): Fits 13-32 inch flat or curved monitors, VESA 75x75 or 100x100; main trade-off: 17.6 lb (8 kg) per-arm ceiling rules out many 32 inch heavy panels.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Fits 13-32 inch flat or curved monitors, VESA 75x75 or 100x100
- ✓ Gas spring gives 11 inches (280mm) of assisted height travel
- ✓ Triple-bolt wall plate anchors to cement, brick, or wood studs
- ✓ 3-year manufacturer warranty plus lifetime tech support from AVLT
Cons
- ✗ 17.6 lb (8 kg) per-arm ceiling rules out many 32 inch heavy panels
- ✗ Wall mount only - no desk clamp or grommet option included
- ✗ Permanent install drills into the wall; repositioning means patching holes
- ✗ Requires locating studs or masonry anchors, so placement is constrained
Manufacturer description
The AVLT Dual Monitor Arm Wall Mount clears your desk entirely by moving two screens onto the wall instead of the desktop. It holds any pair of flat or curved monitors from 13 to 32 inches, up to 17.6 lbs (8 kg) each, using standard VESA 75x75mm or 100x100mm hole patterns. The triple-bolt heavy duty wall plate anchors into cement, brick, or wood, so this is a permanent-mount solution rather than a clamp-on arm. Gas spring assistance gives you 11 inches (280mm) of height travel, and each arm independently handles extension, tilt, swivel, and landscape-to-portrait rotation, so you can dial in…
SpecPicks Verdict
SpecPicks scored AVLT Dual Monitor Arm Wall Mount for 13-32" Screens using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. AVLT's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- FITS 13" TO 32" SCREEN: Dual monitor desk mount fits most of flat/curved computer monitors up to 17.6 lbs (8 kg) each in weight with VESA 75x75mm or 100x100mm mounting holes
- SAVE VALUABLE SPACE: Lift monitors in the air to regain workspace. The triple bolts heavy duty wall plate can be mounted on a cement wall, brick wall, and wood wall
- ERGONOMIC VIEWING HEIGHT: Gas spring monitor arm assists height adjustment up to 11" (280mm). Adjusting the monitor adapts to your posture by arm extension, vertical tilt, horizontal swivel, and landscape or portrait rotation
- DISCOVER PRODUCTIVE SELF: After locking a few screws, the monitor wall mount instantly improve working posture, increase workspace, and hide cables
- RESPOND WITHIN 24HRs: Friendly tech support to help with any questions or concerns. AVLT-DM10-1 is covered by 3-YEAR MANUFACTURER WARRANTY and LIFETIME TECH SUPPORT
- FULL MOTION FLEXIBILITY: Enjoy complete range of motion with extension, swivel, tilt, and rotation capabilities allowing you to position your monitors at the most comfortable viewing angles
Full Specifications
| Brand | AVLT |
|---|---|
| Color | Dual Extended |
| Weight | 8 kg |
| Material | Aluminum |
| Model Number | AVLT-DM10-1 |
| Mounting Type | Wall Mount |
| Movement Type | Articulating, Swivel |
| Mfr Part Number | AVLT-DM10-1 |
| Number of Items | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Aluminum |
| Maximum Tilt Angle | 35 degrees |
| SAVE VALUABLE SPACE | Lift monitors in the air to regain workspace. The triple bolts heavy duty wall plate can be mounted on a cement wall, brick wall, and wood wall |
| RESPOND WITHIN 24HRs | Friendly tech support to help with any questions or concerns. AVLT-DM10-1 is covered by 3-YEAR MANUFACTURER WARRANTY and LIFETIME TECH SUPPORT |
| Warranty Description | 3 Year Warranty |
| FITS 13" TO 32" SCREEN | Dual monitor desk mount fits most of flat/curved computer monitors up to 17.6 lbs (8 kg) each in weight with VESA 75x75mm or 100x100mm mounting holes |
| DISCOVER PRODUCTIVE SELF | After locking a few screws, the monitor wall mount instantly improve working posture, increase workspace, and hide cables |
| Maximum-Supported Screen Size | 32 inches |
| Minimum-Supported Screen Size | 13 inches |
| Full listing title | AVLT Dual Monitor Arm Wall Mount for 13-32" Screens, Full Motion - Silver | Supports flat/curved screens up to 17.6 lbs each. Smooth gas spring, VESA 75x75/100x100 and clean cable routing |
Ready to buy?
AVLT Dual Monitor Arm Wall Mount for 13-32" Screens, Full Motion - Silver | Supports flat/curved screens up to 17.6 lbs each. Smooth gas spring, VESA 75x75/100x100 and clean cable routing is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Noctua NH-U12S vs ML240L RGB on a Ryzen 7 5800X
- Best GPU for Ryzen 7 9800X3D in 2026: Pairing Guide
- Best Controller for PC Gaming in 2026: GameSir G7 SE vs DualSense vs HORI
- Ryzen 7 5800X3D vs 5800X: Does 3D V-Cache Beat Raw Clocks for Gaming?
- Inside China's Mini PC Production: How They're Built
- DeepSeek Seeks More Cash Weeks After $7B Round
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- Boot Windows 98 from CompactFlash: A Silent, Reliable CF-to-IDE Build
- Best Budget GPU for Local 12B–14B LLM Inference: Why the RTX 3060 12GB Still Wins
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Gaming
- Ollama vs LM Studio MLX in 2026: Which Local Runner Wins?
- Best Gaming CPU Coolers Under $100 in 2026
- GPT-5.6 Sol Nearly Matches Fable 5 at a Third the Cost: The Local-Rig Angle
- Forza Horizon 6 Cuts Load Times to 4 Seconds With Advanced Shader Delivery
- 7800X3D vs 5700X3D: Is the AM5 Upgrade Worth It?
- llama.cpp Vulkan on the RTX 3060 12GB: Setup and Measured tok/s for 2026
- Best Hardware for Local OCR and Document AI in 2026
- Best CPU Cooler for Ryzen 7 5800X & AM4 Overclocking (2026)
- Best Streaming Gear for Starting a Channel in 2026
- AMD Ryzen Buying Guide 2026: Every Tier Compared
- Anthropic Launches Claude Science for Researchers
- Logitech Extreme 3D Pro vs DualSense for Flight and Space Sims in 2026
- Half an MI350X in a PCIe Slot: Inside AMD’s 144GB MI350P, the First Air-Cooled CDNA 4 Card
- Best Budget SSDs for Gaming PCs and Consoles in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090