Skip to main content
BENFEI SATA to Molex, 3 Pack 4 Pin Molex to SATA Power Cable - 10 Inches
BENFEI

BENFEI SATA to Molex, 3 Pack 4 Pin Molex to SATA Power Cable - 10 Inches

Bottom line: The BENFEI SATA to Molex: 10-inch length reaches drive bays without excess slack to hide; main trade-off: molex-to-SATA adapters are a known fire-risk category; inspect molding before use.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 10-inch length reaches drive bays without excess slack to hide
  • ✓ Straight connectors stay low-profile in tight cases
  • ✓ Named compatibility list: Antec VP-450W, EVGA 430W, Cooler Master Elite 460W

Cons

  • ✗ Molex-to-SATA adapters are a known fire-risk category; inspect molding before use
  • ✗ Only 10 inches — too short for bottom-mount PSU to top 5.25-inch bay
  • ✗ Straight connectors only; no right-angle option for cramped side clearance
  • ✗ No listed amperage rating, so high-draw drive counts are guesswork

Manufacturer description

Older power supplies came loaded with 4-pin Molex connectors and nothing your modern drives can actually use. The BENFEI SATA to Molex adapter set solves that mismatch directly: each 10-inch cable takes a male Molex LP4 output from your PSU and converts it to a female SATA power plug, so a current SSD, HDD, or optical drive runs off legacy hardware without a full power supply swap. You get three cables per pack, which covers a typical retro or budget build with a spare left over for the next repair job. The 10-inch length is chosen for internal routing — long enough to reach a drive bay from…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for BENFEI SATA to Molex, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "10-inch length reaches drive bays without excess slack to hide"; the main trade-off is "Molex-to-SATA adapters are a known fire-risk category; inspect molding before use". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this let me run a new SATA SSD on an old power supply?

Yes. That is the intended use — it converts a 4-pin Molex LP4 output on a legacy PSU to a female SATA power connector. BENFEI lists the Crucial 256GB, Intel 520 Series 120GB, and Kingston 120GB and 240GB 2.5-inch SSDs among verified drives.

How long are the cables and how many come in the pack?

Each cable is 10 inches, and the pack contains 3 cables. BENFEI specifies that length for internal cable management, so plan your PSU-to-drive-bay run before ordering.

Which direction does it convert — Molex to SATA or SATA to Molex?

Male Molex to female SATA. The 4-pin male end plugs into your power supply's Molex lead; the SATA end plugs into the drive. It does not work in reverse.

Which power supplies are confirmed to work with it?

BENFEI's sample compatibility list names the Antec VP-450W, Coolmax 500W, Cooler Master Elite 460W, and EVGA 430W. Any PSU with a standard 4-pin Molex LP4 output should work, but check the listing for the full list.

Is it good enough to trust with drives I care about?

Molex-to-SATA adapters as a class have a reputation for poor molding on cheap units, so inspect each cable's connector before powering a drive you value, and check the listing for current warranty terms.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • FLEXIBLE SATA POWER CABLE connects the latest Serial ATA hard drives or optical drives to a power supply with legacy Molex LP4 ports; Male to Female Molex to SATA cable with straight connectors is the perfect 10 inch length for internal cable management
  • COST-EFFECTIVE 3-PACK of hard drive power cables provides a spare or replacement SATA for Molex cable when upgrading your computer
  • IDEAL SOLUTION for the DIY computer builder or IT tech repair when installing new or replacement SATA hard drives or DVD drives to a power supply that only has Molex power ports
  • RECYCLE LEGACY EQUIPMENT to connect new SATA HDDs and optical drives to older power supplies with 4 pin Molex ports
  • COMPATIBLE with 5V SATA devices connecting to 12V ATX power supplies; Sample compatibility list includes Antec VP-450W Power Supply, ASUS 24x DVD-RS serial-ATA internal optical drive, ASUS DVD SATA Supermulti Burner, Coolmax 500W Power Supply, Cooler Master Elite 460W Power Supply, Crucial 256GB SATA 2.5" Internal SSD, EVGA 430W Power Supply, Intel 520 Series 120GB SATA 2.5" SSD, Kingston Digital 120GB 2.5" SSD, Kingston Digital 240GB SSDNow 2.5" SSD

Full Specifications

BrandBENFEI
Model000238black-3p
Cable TypeSATA
Item ShapeRound
Unit Count3 Count
Item Length10 Inches
Part Number000238black-3p-stickerless
Connector TypeMolex 4pin, Sata 15pin
Number of Pins4
Maximum Current3 Amps
Maximum Voltage5 Volts
Number of Items3
Connector GenderMale-to-Female
Compatible DevicesDVD Player, PC
Data Transfer Rate6 Gigabits Per Second
Indoor Outdoor UsageIndoor, Outdoor
Customer Package TypeStandard Packaging
Compatible Phone ModelsNo Compatible Phone Models
Recommended Uses For Productinternal cable management, upgrading computers, connecting new SATA hard drives or DVD drives to older power supplies, recycling legacy equipment

Ready to buy?

BENFEI SATA to Molex, 3 Pack 4 Pin Molex to SATA Power Cable - 10 Inches is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →