StarTech.com 15.7 in (400 mm) SATA Power Splitter Adapter Cable
Bottom line: The StarTech.com 15.7 in SATA Power Splitter Adapter Cable ($9.99 on Amazon as of 2026-10-06): Turns one SATA power plug into four receptacles; main trade-off: all four drives share one PSU rail's current budget.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Turns one SATA power plug into four receptacles
- ✓ 400 mm (15.7 in) length reaches across a mid-tower
- ✓ Durable construction per StarTech.com
- ✓ Cheaper than upgrading the whole power supply
Cons
- ✗ All four drives share one PSU rail's current budget
- ✗ 400 mm may be excess cable in a small-form-factor case
- ✗ No power switching or per-port control
- ✗ Adds four more connection points that can work loose
Manufacturer description
1x SATA Power Plug to 4x SATA Power Receptacle Durable construction
SpecPicks Verdict
SpecPicks scored StarTech.com 15.7 in SATA Power Splitter Adapter Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. StarTech.com's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How many drives can I power with the PYO4SATA?
It converts 1 SATA power plug into 4 SATA power receptacles, so four SATA devices off a single PSU lead. Confirm your power supply rail can carry the combined draw.
How long is this SATA power splitter?
15.7 inches, or 400 mm, measured across the cable. That is long enough to run from a PSU to a drive cage in most mid-tower cases.
Will this work in an older or retro PC build?
Yes, as long as your power supply has at least one free SATA power connector to feed it. It is a SATA-to-SATA adapter and does not convert Molex.
Key Features
- 1x SATA Power Plug to 4x SATA Power Receptacle
- Durable construction
Full Specifications
| Size | 1 |
|---|---|
| Brand | StarTech.com |
| Color | Black |
| Model | PYO4SATA |
| Warranty | Lifetime |
| UnitCount | 1 |
| Manufacturer | StarTech.com |
| ItemPartNumber | PYO4SATA |
| Full listing title | StarTech.com 15.7 in (400 mm) SATA Power Splitter Adapter Cable - M/F - 4x Serial ATA Power Cable Splitter (PYO4SATA) |
Ready to buy?
StarTech.com 15.7 in (400 mm) SATA Power Splitter Adapter Cable - M/F - 4x Serial ATA Power Cable Splitter (PYO4SATA) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Build a Raspberry Pi Carputer for Your Daily Driver (2026)
- RetroArch PS2 Emulation: Setup, BIOS & Performance Guide
- Best Steam Deck Accessories in 2026: Docks, Audio, Controllers, and Storage
- Self-Host Immich Photo Backup on a Raspberry Pi 4 8GB in 2026
- Transcend CF133 CompactFlash as a Win98 Boot Drive: Speed Tests, Compatibility, and the Adapter That…
- How to Image a 90s Big-Box CD-ROM to CompactFlash for IDE-Adapter Retro PCs
- SATA SSD vs NVMe for a Ryzen 5 5600G Budget Build in 2026
- Best CPU Cooler for AM4 Ryzen Overclocking in 2026
- Build a Raspberry Pi Retro Handheld with the 8BitDo SN30 Pro
- Claude Limits Cut: Why a Local Fallback Rig Just Got Cheaper
- Aider vs Cline vs Continue.dev for Local-LLM Coding on a 12GB GPU
- Raspberry Pi Air Quality Sensor Guide: Setup & Sensor Picks
- Noctua NH-U12S vs ML240L RGB: Best Cooler for a 5800X
- Why PSU Fans Aren't Built for Repairability
- M5 vs DGX Spark vs Strix Halo vs RTX 6000: AI Workload Guide
- LM Studio vs Ollama on an RTX 3060 12GB: Which Local Runtime in 2026?
- Is the RTX 3060 12GB Still the Best Budget 1080p GPU in 2026?
- Open-Source Linux Driver Lands for the ASUS ZenVision Lid OLED
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD's July Timeline
- Logitech G920 vs HORI Overdrive for Sim Racing in 2026
- Best Quiet PC Cooling Upgrades in 2026
- Best Raspberry Pi Alternative in 2025: Full Buying Guide
- Best GPU for Running Llama 3.1 8B Locally on a Budget (2026)
- Best Gaming Monitors Under $400 in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090