The Imaging World Shure SM7B Vocal Microphone
Bottom line: The The Imaging World Shure SM7B Vocal Microphone: Ships as a bundle: SM7B, Cloudlifter CL-1, spare 10-foot XLR cable, microfiber cloth; main trade-off: 634.99 bundle price sits far above entry-level USB streaming mics.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Ships as a bundle: SM7B, Cloudlifter CL-1, spare 10-foot XLR cable, microfiber cloth
- ✓ Cloudlifter adds +25 dB of clean gain, fixing the SM7B's low-output reputation
- ✓ Cardioid pattern plus internal air suspension rejects desk thumps and room bleed
- ✓ Built-in pop filter and bass roll-off / presence boost switches tune voice on the mic
Cons
- ✗ 634.99 bundle price sits far above entry-level USB streaming mics
- ✗ Needs an interface supplying 48V phantom power for the Cloudlifter to work
- ✗ Dynamic XLR mic means no plug-and-play USB option for a laptop-only setup
- ✗ No boom arm, shock mount, or audio interface included in the bundle
Manufacturer description
The Shure SM7B Vocal Microphone is a dynamic microphone with a smooth, flat, wide-range frequency response appropriate for music and speech in all professional audio applications. It features a cardioid polar pattern, bass roll-off and midrange emphasis (presence boost) controls, and shielding against broadband interference. An internal air suspension shock isolation helps to eliminate mechanical noise transmission and a yoke mount facilitates mounting and provides precise control of the mic position.The Cloudlifter CL-1 Mic Activator from Cloud Microphones is a compact, single-input…
SpecPicks Verdict
SpecPicks scored The Imaging World Shure SM7B Vocal Microphone using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. The Imaging World's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Includes: Shure SM7B Microphone + Cloud CL-1 Cloudlifter + Extra XLR Cable + The imaging World MicroFiber Cloth
- Use SM7B For Professional Voice-Over Applications - Flat, Wide-Range Frequency Response - Air Suspension Shock Isolation
- Pop Filter Built-In - Cardioid Polar Pattern - Roll-Off and Presence Boost Controls
- Cloudlifter 1x Mic Input - Improves Signal-to-Noise Ratio - Use with Passive Dynamic & Ribbon Mics - +25 dB of Clean, Transparent Gain
- Requires Only Phantom Power to Operate - Ideal for Long Cable Runs - Use with Low-Output Mics - Use with Noisy or Low-Gain Preamps - Made in the USA
Full Specifications
| Brand | The Imaging World |
|---|---|
| Color | Transparent |
| Includes | Shure SM7B Microphone + Cloud CL-1 Cloudlifter + Extra XLR Cable + The imaging World MicroFiber Cloth |
| Model Name | SM7B |
| Model Number | SM7B Cloud Kit |
| Power Source | Corded Electric |
| Audible Noise | 25 db |
| Polar Pattern | Unidirectional |
| Built-In Media | microphone |
| Connector Type | XLR |
| Mfr Part Number | SM7B Cloud Kit |
| Special Feature | Stand |
| Antenna Location | Singing |
| Audio Sensitivity | 25 db |
| Compatible Devices | Audio Interface |
| Enclosure Material | Microfiber |
| Number of Channels | 1 |
| Included Components | microphone |
| Signal-to-Noise Ratio | 78 db |
| Microphone Form Factor | Handheld |
| Full listing title | Shure SM7B Vocal Microphone with Cloud Microphones Cloudlifter CL-1 Mic Activator and Extra 10' XLR Cable Bundle |
Ready to buy?
Shure SM7B Vocal Microphone with Cloud Microphones Cloudlifter CL-1 Mic Activator and Extra 10' XLR Cable Bundle is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget Streaming Setup for Beginners in 2026
- AI-Assisted Driver Hunting on Voodoo3 + GeForce 4 Ti: A 2026 Win98 Workflow
- hipEngine on Strix Halo + 7900 XTX: Native Qwen 3.6 Inference Without ROCm Drama
- Best Sim Racing Wheel & Pedal Setup in 2026
- Best PC Game Streaming Gear in 2026: 5 Picks for Mic, Light & Capture
- Open-WebUI Self-Hosted on a Ryzen 5 5600G + RTX 3060: A Private ChatGPT at Home
- Qwen3 4B on Raspberry Pi 4 8GB vs Ryzen 5 5600G: Which Cheap Always-On Box Wins?
- Build a Raspberry Pi 4 8GB Starter Home Lab in 2026: BOM + First Services
- Ryzen AI Developer Platform: AMD's Debian Linux for AI Devs
- Best GPU for 1440p 144Hz Esports in 2026: RTX 3060 Ventus Sweet Spot
- Best GPUs for 1440p Gaming in 2026
- Best Sim Racing Wheel for PC and Console in 2026
- Datacenter GPU in a Gaming PC for £200: Is It Worth It?
- Best GPU for gpt-oss 20B in 2026
- Jellyfin on a Raspberry Pi 4 8GB in 2026: The 4K Transcode Reality Check
- Don't Buy Cheap SSDs: Hidden Risks Explained (2026)
- Qwen 3.8 vs Kimi K3: Which Open-Weight Model Fits a 12GB Rig?
- Best Gaming GPUs for 1080p High-Refresh Rate (2026)
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive
- Inside the Creative Katana V2X Soundbar Teardown — and What It Says About Sound Blaster
- Ryzen 7 9800X3D vs Ryzen 9 9900X3D: Which Zen 5 X3D Chip Wins in 2026?
- Best SATA SSD for a 2026 Game Library Drive
- Is the RTX 5050 Really as Bad as Everyone Says?
- Best CPU Coolers for a Quiet Ryzen Gaming PC in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090