MYSWEETY
MYSWEETY GRBL 1.1f CNC Controller 3-Axis CNC Router Machine Control Board
Bottom line: The GRBL 1.1f CNC Controller 3-Axis CNC Router Machine Control Board ($29.99 on Amazon as of 2026-10-07): GRBL 1.1f firmware works with Candle, UGS, and GRBL Control on Windows XP-10 and Linux; main trade-off: locked to 24VDC input, so 12V bricks from older 3018 kits will not run it.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ GRBL 1.1f firmware works with Candle, UGS, and GRBL Control on Windows XP-10 and Linux
- ✓ Drop-in fit for CNC 3018, 3018 PRO, 3018 MAX, 1310, and 1610-PRO engravers
- ✓ Drives XYZ plus spindle and laser output from one 24V board
- ✓ Handles Nema17 and Nema23 steppers via replaceable A4988 driver modules
- ✓ CH340 USB and Atmel 328P Nano core keep drivers and flashing straightforward
Cons
- ✗ Locked to 24VDC input, so 12V bricks from older 3018 kits will not run it
- ✗ A4988 drivers cap around 2A and want heatsinking above 1.5A
- ✗ Spindle output tops out at 150W, limiting heavier cutting upgrades
- ✗ 2-pin lasers need the specific white "+ s-" header, which trips up first-time wiring
Manufacturer description
Package include:1x Upgraded 3 Axis GRBL 1.1 Control Board1x USB cableSpecification:Connection: USB (USB-CH340)Input voltage: 24VDC (only support 24VDC input)Control software: GRBL control (candle), Universal Gcode Sender Master chip atmel 328P (arduino nano)Spindle drive chip: MOSFET recommendation 24V DC, current : within 10ASpindle PWM speed: SupportSupport stepper motor: Maximum current of 2A or less, is recommended within 1.5A and additional heat (any nema17 or nema23 stepper motor)Support system: Windows XP / Win 7 / Win 8 / Win 10 (32/64 can be), LinuxPower Interface: 5.5-2.5mm DC…
SpecPicks Verdict
SpecPicks scored GRBL 1.1f CNC Controller 3-Axis CNC Router Machine Control Board using a rating × review-volume × price-fit model applied to published specs and reviews across the controllers & gamepads category. MYSWEETY's controllers & gamepads lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for controllers & gamepads of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Model: Upgraded 3 Axis GRBL 1.1f USB Port GRBL Control Board. Input voltage: 24VDC
- Support Software: GRBL Contol, Candle(3 axis), UGS(Universal Gcode Sender). Support System: Windows XP/7/8/10, Linux
- Applications: The control board can be used with the 1310,1610-PRO, 3018, 3018 PRO and 3018 MAX cnc engraving machine
- Stepper Motor Drive: A4988. Spindle power: 150W. Input voltage: 24V (12-24V). Maximum current of 2A or less is recommended within 1.5A and additional heat (Any stepper motor Nema17, Nema23)
- Support XYZ 3-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")
Full Specifications
| Size | Small |
|---|---|
| Brand | MYSWEETY |
| Color | Transparent |
| Model | Upgraded 3 Axis GRBL 1.1f USB Port GRBL Control Board. Input voltage: 24VDC |
| Material | Other |
| Applications | The control board can be used with the 1310,1610-PRO, 3018, 3018 PRO and 3018 MAX cnc engraving machine |
| Connectivity | USB |
| Compatibility | Linux |
| Support Software | GRBL Contol, Candle(3 axis), UGS(Universal Gcode Sender). Support System: Windows XP/7/8/10, Linux |
| Package Dimensions | 7.09 x 5.28 x 1.02 inches |
| Item Package Quantity | 1 |
| Full listing title | GRBL 1.1f CNC Controller 3-Axis CNC Router Machine Control Board for CNC 3018 Pro 3018 Max 3018Pro-M Milling Machine |
Ready to buy?
GRBL 1.1f CNC Controller 3-Axis CNC Router Machine Control Board for CNC 3018 Pro 3018 Max 3018Pro-M Milling Machine is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Controllers & Gamepads
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Best Peripherals for a Modern Retro-PC LAN Party (2026)
- AI-Driven Sound Blaster Driver Install on WinXP via Vision LLM
- AA-AgentPerf: What the New Agentic Benchmark Means for Local Coding Rigs
- Best SSD for PS4 Pro in 2026: SATA Upgrades That Cut Load Times
- Logitech G502 Hero vs Modern FPS Mice: Is the Classic Still Worth It in 2026?
- What Handheld Console Should I Buy in 2026? A Decision Framework
- Running a Local LLM on the Ryzen 7 5800X + RTX 3060 12GB: Ollama Throughput Per Watt
- HyperX QuadCast 2 vs Blue Yeti for Twitch in 2026
- Self-Hosting Jellyfin on a Ryzen 5 5600G: 4K Transcode on the Cheap
- Do you need a shifter for sim racing? Logitech G29 + Thrustmaster TH8A
- MiniMax-M3 Tops Open-Weight Models at Intelligence Index 55
- Microsoft's Copilot Goes Agentic — Run Your Own Agent Locally on an RTX 3060
- Best Budget Local-AI Workstation Parts in 2026: 5 Picks
- Samsung Odyssey 4K vs KOORUI QD-Mini LED: Best 4K Gaming Monitor?
- How Much VRAM Does 32k Context Use on an RTX 3060 12GB? (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5070
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- ComfyUI on an RTX 3060 12GB: Real Image-Gen Throughput in 2026
- Jan vs LM Studio: The Best No-Terminal Local LLM App for an RTX 3060 (2026)
- Raspberry Pi 5 Secondary Monitor Setup Guide (2025)
- Best IDE & SATA-to-USB Adapters for Retro PC Builds in 2026
- 3dfx Voodoo5 5500 AGP tuning guide — 2026 edition
- DeepCool AK620 vs Noctua NH-U12S for the Ryzen 7 5800X
- Best Parts for a Local LoRA Fine-Tuning Workstation in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090