Skip to main content
SATA Card PCIE 3.0, 4 Port with 4 Cables, Controller Expansion Card with Low Profile Bracket, Non-Raid, Boot as System Disk, Support 4 SATA 3.0 Devices
Ziyituod

Ziyituod SATA Card PCIE 3.0

Bottom line: The Ziyituod SATA Card PCIE 3.0: Four 6Gb/s SATA 3.0 ports from one PCIe 3.0 slot; main trade-off: non-RAID card: no onboard array support, motherboard RAID only.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Four 6Gb/s SATA 3.0 ports from one PCIe 3.0 slot
  • ✓ ASMedia ASM1064 chipset with FIS- and command-based port multiplier switching
  • ✓ Bootable: system can boot from a drive on this controller
  • ✓ Four SATA cables and low-profile bracket included in the box
  • ✓ Windows XP/2003/7/8/10, macOS, Linux and NAS driver support

Cons

  • ✗ Non-RAID card: no onboard array support, motherboard RAID only
  • ✗ Vendor notes compatibility varies by motherboard environment
  • ✗ Low-profile bracket fits most but not all chassis (99% claimed)
  • ✗ ASM1064 shares PCIe bandwidth across all four ports under load

Manufacturer description

The Ziyituod SATA Card PCIE 3.0 adds four 6Gb/s SATA 3.0 ports to any desktop with a free PCIe slot, and it ships with the four SATA cables and the low-profile bracket already in the box. That matters if you are reviving an older build or expanding a NAS: you get drive headroom without hunting down accessories separately. The card runs an ASMedia ASM1064 controller, which handles both FIS-based and command-based port multiplier switching, so you can hang multiple large-capacity drives off it and keep them addressable at full SATA III speed. This is a non-RAID host bus adapter, not a hardware…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Ziyituod SATA Card PCIE 3.0, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. On the listing's own facts, the case for it is "Four 6Gb/s SATA 3.0 ports from one PCIe 3.0 slot"; the main trade-off is "Non-RAID card: no onboard array support, motherboard RAID only". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Can I boot Windows from a drive connected to this card?

Yes. Ziyituod states the system can boot from a drive attached to this SATA controller, though the card itself is non-RAID.

Does this card do RAID?

Not on its own. It is a non-RAID controller, but if your motherboard has a RAID function you can build an array using this card's drives through the board.

Which operating systems are supported?

Windows XP, Server 2003, 7, 8 and 10, plus macOS, Linux and NAS operating systems, per the manufacturer's listed compatibility.

Do I need to buy SATA cables separately?

No. The card ships with four SATA cables and a low-profile bracket, so you can connect all four SATA 3.0 devices out of the box.

Will it fit a small form factor case?

The included low-profile bracket is rated by Ziyituod as compatible with 99% of chassis on the market. Confirm your case's slot height before ordering.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • ➤You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card.
  • ➤4 Ports Adapter Card --- You could add 4 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
  • ➤Chipset --- With using The Asmedia1064 chip,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported.
  • ➤For All PCs --- with a low profile Bracket and 4 SATA Cable,compatible with 99% size chassis on the market.Compatibility issues may occur due to the different motherboard environments in which it is installed.
  • ➤System Support --- Connect 4 large capacity storage devices at the same time. Compatible with Windows XP /2003 / 7 / 8 / 10 / MAC / NAS / Linux OS.Any question please connect us: Ziyituod@evisionde.com

Full Specifications

BrandZiyituod
Stylestandard
Style Namestandard
Unit Count1 Count
Model NumberZYT-SA3014
CompatibilityMac, Linux
Mfr Part NumberZYT-SA3014
Compatible DevicesPersonal Computer, Laptop
Hardware InterfacePCI, PCI Express x1, PCIE x 4
Full listing titleSATA Card PCIE 3.0, 4 Port with 4 Cables, Controller Expansion Card with Low Profile Bracket, Non-Raid, Boot as System Disk, Support 4 SATA 3.0 Devices

Ready to buy?

SATA Card PCIE 3.0, 4 Port with 4 Cables, Controller Expansion Card with Low Profile Bracket, Non-Raid, Boot as System Disk, Support 4 SATA 3.0 Devices is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Expansion Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →