2 Pack 3D Replacement Joystick Analog Thumb Stick for Nintendo Switch Joy-Con Controller
Bottom line: The Liphontcta 2 Pack 3D Replacement Joystick Analog Thumb Stick: Two joystick modules per pack - repairs both Joy-Cons or leaves a spare; main trade-off: requires opening the Joy-Con shell yourself - not a plug-in fix.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Two joystick modules per pack - repairs both Joy-Cons or leaves a spare
- ✓ Each stick fits either left or right Joy-Con, no side-specific ordering
- ✓ Ships with 3 tri-wing Y screwdrivers, the bit most repair kits omit
- ✓ Tweezers and pry tools included for ribbon cable and shell separation
Cons
- ✗ Requires opening the Joy-Con shell yourself - not a plug-in fix
- ✗ Mandatory recalibration in Switch settings after every install
- ✗ Third-party Liphontcta part, not a Nintendo OEM joystick module
- ✗ No stated warranty or drift-lifespan figure in the listing
Manufacturer description
If your Joy-Con drifts mid-match, this Liphontcta 2-pack of 3D replacement analog thumb sticks is the repair kit that brings the controller back instead of replacing it. Each stick fits either the left or right Joy-Con, so one package covers both halves of a drifting pair or gives you a spare for the next failure. The kit is built around the part that actually wears out: the analog joystick module, swapped in place of your broken, worn-out, or damaged original. Everything needed for the teardown ships in the box. You get three Y-type tri-wing screwdrivers and two Phillips cross screwdrivers…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Liphontcta 2 Pack 3D Replacement Joystick Analog Thumb Stick, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the joysticks & game port category before committing. On the listing's own facts, the case for it is "Two joystick modules per pack - repairs both Joy-Cons or leaves a spare"; the main trade-off is "Requires opening the Joy-Con shell yourself - not a plug-in fix". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this joystick work in both the left and right Joy-Con?
Yes. Liphontcta lists each of the two included 3D analog sticks as compatible with either the left or right Joy-Con, so a single 2-pack can fix a drifting pair.
What tools come in the box?
Three Y-type tri-wing screwdrivers, two Phillips cross screwdrivers, tweezers, and pry tools - plus a printed installation instruction sheet. No separate tool purchase is needed.
Do I need to do anything after installing the stick?
Yes. The manufacturer specifies calibrating the joystick through the Nintendo Switch settings menu after installation. Skipping calibration can leave the new stick reading off-center.
Will this fix Joy-Con drift?
It replaces the analog stick module itself, which is the component that wears out and causes drift. If your drift comes from the stick, swapping it addresses the source; other faults inside the controller are not covered.
Is this an official Nintendo part, and is it covered by a warranty?
No, it is a third-party Liphontcta replacement, not a Nintendo OEM module. The listing states no warranty terms - check the product listing for current coverage before buying.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Perfect Replacement: Replacement analog joystick for Nintendo Switch Joy-con; Works for Left or Right joy-con controller,Replaces your broken, worn-out or damaged analog, bring your controller back to life
- Package include: 2 x Replacement Joystick for Nintendo Switch Joy-Con
- Professional & Complete Repair Tool: Comes with the 3 Replacement"Y" Tri-wing Screwdriver and2 Replacement "+" Cross Screwdriver repair tools, tweezers, pry tools
- Easy Operation: Providing you a detailed installation instruction, let your operation become easier!
- NOTE: please calibrate the joystick using Nintendo Switch setting after install
Full Specifications
| NOTE | please calibrate the joystick using Nintendo Switch setting after install |
|---|---|
| Brand | Liphontcta |
| Compatibility | Switch |
| Easy Operation | Providing you a detailed installation instruction, let your operation become easier! |
| Package include | 2 x Replacement Joystick for Nintendo Switch Joy-Con |
| Hardware Platform | nintendo switch |
| Compatible Devices | Gaming Console |
| Manufacturer Part Number | MINUSI |
| Professional & Complete Repair Tool | Comes with the 3 Replacement"Y" Tri-wing Screwdriver and2 Replacement "+" Cross Screwdriver repair tools, tweezers, pry tools |
| Full listing title | [New Version] 2 Pack 3D Replacement Joystick Analog Thumb Stick for Nintendo Switch Joy-Con Controller - Include Tri-Wing & Screwdriver Tool Yellow |
Ready to buy?
[New Version] 2 Pack 3D Replacement Joystick Analog Thumb Stick for Nintendo Switch Joy-Con Controller - Include Tri-Wing & Screwdriver Tool Yellow is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- All-AMD Gaming PC Build for 2026: Our Top 5 Ryzen + Radeon Configurations
- Best PC Gaming Peripherals in 2026: 5 Picks for Keyboard, Audio, and Control
- Raspberry Pi Projects for Beginners: 6 No-Solder Builds
- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Gaming CPU in 2026
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5070
- Best Wired Mouse and Pad for FPS in 2026: Logitech G502 Hero and SteelSeries QcK
- RTX 5070 Ti vs RTX 4070 Ti SUPER: Speed vs Price (Nov 2026)
- Open WebUI — self-hosted ChatGPT for your local models
- PC Sim Racing Wheels in 2026: Logitech G29, Thrustmaster and HORI Compared
- Running a Local LLM on the Ryzen 7 5800X + RTX 3060 12GB: Ollama Throughput Per Watt
- KOORUI 27" 4K vs Samsung Odyssey 4K for Console + PC Gaming
- 007 First Light on Steam Deck: Performance & Best Settings
- Raspberry Pi Projects for College Students: 2026 Guide
- Ryzen 5 2600 vs Ryzen 5 5600G for CPU-Only Llama 3.2 3B in 2026
- Ryzen AI Max Mini PC 128GB: Specs, Uses, Alternatives
- MCL8080+ Squeezes an Intel 8080 Emulator into an ATtiny85
- Ultrawide vs 27-Inch 4K for Sim Racing on a G29 and RTX 3060
- Local LLM on Mac: The 2026 Setup Guide
- Minimal Raspberry Pi 5 Case: Friction-Fit 3D Printing Guide
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
- OpenAI Codex Now Repeats Tasks From One Demo: Can a Local RTX 3060 Agent Match It?
- RTX 3060 12GB in 2026: Is It Still a 1080p Value Champion?
- Voodoo 5 6000 FSAA: The Feature That Never Engaged
- Raspberry Pi 4 8GB vs Pi 5 vs Mini-PC for Local LLMs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090