Formulamod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+ EPS 8-P+PCI-E8-P
Bottom line: The Formulamod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+ EPS ($17.99 on Amazon as of 2026-10-07): Covers a full ATX build: 24-pin, 4+4 EPS, and two 8-pin PCI-E in one kit; main trade-off: extensions add length behind the tray, so tight cases get crowded.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Covers a full ATX build: 24-pin, 4+4 EPS, and two 8-pin PCI-E in one kit
- ✓ Pre-bent layering keeps 180-degree bends flat instead of fanned
- ✓ Thick 18AWG wire holds routed shapes without kinking
- ✓ Cable combs included, so no separate comb purchase
- ✓ Extension design works with any PSU, no cable swap needed
Cons
- ✗ Extensions add length behind the tray, so tight cases get crowded
- ✗ Only two PCI-E 8-pin runs, short for triple-connector GPUs
- ✗ Black-only sleeving, no color options in this listing
- ✗ Adds a second connector junction per line versus native cables
Manufacturer description
The Formulamod Sleeve Extension Power Supply Cable Kit turns a cluttered PSU compartment into a clean, show-ready build without replacing your power supply. The kit ships four extensions that cover a standard ATX system: one 24-pin ATX for the motherboard, one 4+4-pin EPS for CPU power, and two 8-pin PCI-E runs for your graphics card. Each cable uses thick 18AWG wire wrapped in a high-density flexible sleeve, so the runs hold a shape when you route them but still bend where you need them to. The detail that separates this Formulamod kit from generic sleeved extensions is the pre-bent design…
SpecPicks Verdict
SpecPicks scored Formulamod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+… using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Formulamod's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will these cables work with my power supply?
Yes. These are extensions, not replacement cables, so they plug in between your PSU's existing cables and your components. Formulamod lists them as compatible with all power supplies.
What cables are included in the kit?
Four extensions: one 24-pin ATX for the motherboard, one 4+4-pin EPS for CPU power, and two 8-pin PCI-E for the graphics card. Cable combs are included.
Do I need to buy cable combs separately?
No. The kit ships with several combs for routing and organizing the runs, so you can set spacing on the 24-pin and PCI-E cables without a separate purchase.
How thick are the wires?
All cables use 18AWG wire inside a high-density flexible sleeve. That gauge is stiff enough to hold a routed bend but still flexible enough to work in a case.
Are these cables good for a build with visible cable runs?
That is the main use case. The pre-bent design makes upper-layer wires slightly longer than lower-layer ones so a 180-degree bend stays neat, and the heat-shrink-less ends keep connectors slim.
Key Features
- Including (1) 24-P ATX, (1) 4 + 4P EPS, (2) 8-P PCI-E
- All cables are manufactured with thick 18AWG wires and come in a high-density flexible protective sleeve allowing for a stiff yet adaptable temperament. Comes with several cable combs to cleanly route and organize.
- Premium sleeved cable extension, compatible with all power supplies
- Pre-bent Design: The upper layer cables are slightly longer than the down layer ones, which make the cables remain a perfect neat look after bent 180° .
- Heat-Shrink-Less Cable Design
Full Specifications
| Brand | Formulamod |
|---|---|
| Color | black |
| Gauge | 18 |
| Model | Fm-NCK1-300 |
| Cable Type | PCI Express |
| Item Shape | Round |
| Model Name | Fm-NCK1 |
| Unit Count | 1 Count |
| Part Number | Fm-NCK1-300 |
| Connector Type | Atx, Eps, Pci-e |
| Number of Pins | 4 |
| Outer Material | plastic" or "rubber |
| Maximum Current | 10.17 A |
| Maximum Voltage | 12 volts_of_direct_current |
| Number of Items | 2 |
| Pre-bent Design | The upper layer cables are slightly longer than the down layer ones, which make the cables remain a perfect neat look after bent 180° . |
| Special Feature | Braided, Pre-bent design |
| Connector Gender | Male-to-Female |
| Specification Met | UL |
| Compatible Devices | PC |
| Full listing title | Formulamod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+ EPS 8-P+PCI-E8-P with Combs for PSU to Motherboard/GPU (Black) |
Ready to buy?
Formulamod Sleeve Extension Power Supply Cable Kit 18AWG ATX 24P+ EPS 8-P+PCI-E8-P with Combs for PSU to Motherboard/GPU (Black) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Gaming Mouse Pad for Esports FPS in 2026
- Ryzen 5 5600G vs Intel i7-9700K for Budget Gaming in 2026
- Best Budget SATA SSD in 2026: BX500 vs SanDisk Plus vs WD Blue
- Best SATA SSD to Revive an Old Gaming PC in 2026
- Apple Intelligence Ships in China on Alibaba's Qwen: What It Means
- Build a Fully Local PDF-to-Audiobook Pipeline on Jetson Orin Nano Super
- Qwen 3.6 27B vs DeepSeek V4: Which Local Model Wins on a Single 5090?
- Best Controller for PC Emulation and Retro Console Crossover (2026)
- Ryzen AI Max 395 Mini PC: Specs, Performance & Buying Guide
- Self-Hosted Personal Finance: n8n + Actual Budget + Claude
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- Best Work-From-Home Kit for Gamers in 2026
- Windows XP Gaming ISO: A Modern Hardware Setup Guide
- 3dfx Voodoo2 SLI on Windows 98 SE: Period-Correct Build, Glide Driver Setup, and Real Quake 3 Benchmarks
- RTX 3060 12GB Showdown: ZOTAC Twin Edge vs MSI Ventus 2X (2026)
- Build a Wireless Fingerprint Door Lock on a Raspberry Pi Zero W
- Imaging and Restoring Vintage IDE Drives in 2026: SATA/IDE-to-USB Adapters Compared
- Raspberry Pi Projects for Beginners: 6 No-Solder Builds
- Best Parts for a Dual RTX 3060 24GB Local-LLM Build in 2026
- Building a Period-Correct 1999 Quake III Arena LAN Rig: Voodoo3, Pentium III, and Win98 SE
- Best Gaming Headset Under $50 for Console + PC (2026)
- AMD Ryzen 7 9800X3D Bundle: DDR5 + MSI B850 Wi-Fi 7 Guide
- Sega Genesis Mini vs SNES Classic Edition: Which Mini Console Wins in 2026?
- Best Coding LLM Stack for an RTX 3060 12GB and 32GB RAM (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090