3PCS PCA9685 16 CH Channel PWM Servo Motor Driver Board Controller 12 bit IIC Interface Module for Arduino or Raspberry pi
Bottom line: The 3PCS PCA9685 16 CH Channel PWM Servo Motor Driver Board Controller 12 is a specs-and-price decision rather than a crowd-consensus one in the single board computers category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 3 pin connectors in groups of 4, so you can plug in 16 servos at one time .
- ✓ Backed by VKLSVAN's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Features:It's an I2C-controlled PWM driver with a built in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running! Output enable pin to quickly disable all the outputs.-The PCA9685 chip is wrapped in the center of the board-16-way steering gear control-Power input terminal-Green power indicator-Using I2C communication, built in PWM driver and a clock.-Compatible with 5V,can also use 3.3V MCU control and safely drive to 6V output.-Address selects pins, so you can put 62 driver board hanging…
SpecPicks Verdict
SpecPicks scored 3PCS PCA9685 16 CH Channel PWM Servo Motor Driver Board Controller… using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. VKLSVAN's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- PCA9685 Contains an I2C-controlled PWM driver with a built-in clock; Power supply voltage is DC5-10V
- It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages).
- Supports using only two pins to control 16 free-running PWM outputs ¨C you can even chain up 62 breakouts to control up to 992 PWM outputs.
- 3 pin connectors in groups of 4, so you can plug in 16 servos at one time .
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
Full Specifications
| Brand | VKLSVAN |
|---|
Hardware benchmark data
Ready to buy?
3PCS PCA9685 16 CH Channel PWM Servo Motor Driver Board Controller 12 bit IIC Interface Module for Arduino or Raspberry pi is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Single Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Muse Spark 1.1 Beats GLM-5.2 at Coding — Does It Change the Local-Rig Question?
- Best Budget SATA SSD for Everyday Upgrades (2026)
- Logitech G29 / G920 Not Detected on Windows 11: Step-by-Step Driver Fix Guide (2026)
- Voodoo 5 6000 Lab Method: Two Motherboards, One Dead BIOS
- Ryzen 7 5800X3D vs Core i7-14700K: The DDR4 Gaming Faceoff for 2026 Builders
- Kimi K2.7 Code on an RTX 3060 12GB: Can a $300 GPU Run It?
- RTX 3060 12GB for Local LLMs: The Complete 2026 Guide
- Gemini Intelligence Hardware Requirements Explained
- Kimi K3 vs Qwen 3.8 for Local Coding Agents in 2026
- Best Budget GPU for CNN & Vision Inference 2026: RTX 3060 12GB
- Best Controller for Steam Deck Docked Mode in 2026
- RTX 3060 12GB vs RTX 4070 12GB for Qwen2.5 14B (2026)
- ATI Radeon 9700 Pro Install Guide: Catalyst Versions, AGP 8x Compatibility, and Period-Correct Drivers
- Sound Blaster Audigy FX in a Period-Correct Win98 Gaming Build
- A Practical Look at the PlayStation Architecture — and Why It Still Matters
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5070
- OpenAI Launches ChatGPT Work: An Agent for Whole Workflows
- AVX-512 Speeds Up Linux Software RAID by Up to 41% on AMD Ryzen
- Playing Pokémon on Steam Deck: The Real 2026 Guide
- Qwen3.7-Plus Goes Agentic: Cloud Model vs Your Local 12GB Rig
- Train a Kick Drum AI Model on 6GB VRAM (Linux Guide)
- Best GPU for i7-13700K at 1440p 180Hz (GTX 1080 Upgrade)
- Best Hardware for Local OCR and Document AI in 2026
- Raspberry Pi 5 8GB Review: Specs, Price & Use Cases (2025)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090