4-Position Switch Joystick Switch Latching Joy Stick Latching Joystick Switch Contactor
Bottom line: The 4-Position Switch Joystick Switch Latching Joy Stick Latching is a specs-and-price decision rather than a crowd-consensus one in the joysticks & game port category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Rubber sleeve cover on stick is to water, oil and dust
- ✓ Backed by Diydeg's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored 4-Position Switch Joystick Switch Latching Joy Stick Latching… using a rating × review-volume × price-fit model applied to published specs and reviews across the joysticks & game port category. Diydeg's joysticks & game port lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for joysticks & game port of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Rubber sleeve cover on stick is to water, oil and dust
- Made of material, this switch is and has good performance
- It can control magnetic starter, contactor, relay and other electrical circuits
- Widely used for industrial control AC 50Hz and DC circuits
- The joystick switch is a latching switch that has 4 normally open contacts
Full Specifications
| Brand | Diydeg |
|---|---|
| Model | Diydegzdvx72rgg6 |
| Material | Rubber |
| Terminal | Push On |
| Unit Count | 1 Count |
| Part Number | Diydegzdvx72rgg6 |
| Switch Type | Temperature Switch |
| Circuit Type | 4 way |
| Contact Type | Normally Open |
| Control Type | Multi-position Latching |
| Compatibility | Switch |
| Material Type | Rubber |
| Mounting Type | Panel Mount |
| Connector Type | Quick Connect |
| Control Method | Touch |
| Operation Mode | ON OFF |
| Maximum Current | 10 A |
| Contact Material | Nickel |
| Specification Met | IEC 60529 |
| Compatible Devices | Magnetic starters, contactors, relays, and other electrical circuits |
| Full listing title | 4-Position Switch Joystick Switch Latching Joy Stick Latching Joystick Switch Contactor for Industrial Control Ac 50Hz and Dc Circuits. |
Ready to buy?
4-Position Switch Joystick Switch Latching Joy Stick Latching Joystick Switch Contactor for Industrial Control Ac 50Hz and Dc Circuits. is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Building a CompactFlash + IDE Storage Stack for Win98 and WinXP Retro Rigs
- Sound Blaster X G6 on a Windows XP Retro Gaming PC: Worth It?
- Best Gaming Desk Setup Essentials in 2026: 5 Picks
- Minimal Raspberry Pi 5 Case: Friction-Fit 3D Printing Guide
- Build a RetroPie Arcade on a Raspberry Pi 4 8GB in 2026
- Best SSD for Gaming and Everyday Builds in 2026
- Ryzen 7 9800X3D vs Ryzen 9 9950X3D: Which X3D Wins at 1440p in 2026?
- KOORUI 27" 4K QD-Mini LED vs Samsung Odyssey 27" 4K: Which 4K Gaming Monitor Wins?
- Why Preassembled PCs Beat DIY Builds in 2026
- Raspberry Pi 4 8GB Cyberdeck Build: A Practical 2026 Parts Guide
- Building a 2002 LAN Party PC: GeForce 4 Ti + Athlon XP
- Silent Cooling for a Retro Sleeper PC: Fitting a Modern Quiet Fan to a Vintage Case
- 3D-Printed Retro PC Case Fits ITX Board, ATX PSU
- Best NVIDIA RTX 3060 Graphics Cards in 2026: 5 AIB Picks Compared
- Run Text-to-SQL Locally on a 12GB GPU After Gemini-SQL2
- Steam Deck Sleep Mode: Should You Leave It Plugged In?
- Best Budget FPS Gaming Setup Under $120: Mouse, Pad, Keyboard and Headset for 2026
- Qwen 3.6 27B vs Llama 3.1 70B on Local Hardware: tok/s, VRAM, and Quality (2026)
- RTX 3060 Driver Crashes and Stuttering: Troubleshooting Guide (2026)
- Jan.ai vs LM Studio vs Ollama: Easiest Local-LLM App for a 12GB Card in 2026
- How to run Llama 3.1 70B on Arc B580
- Logitech G502 Hero in 2026: Is the $40 Classic Still the Mouse to Beat?
- Intel llm-scaler-vllm 1.4: Arc Pro B70 Inference Support Lands
- AMD Ryzen AI Max+ 395 Box (Strix Halo) for Local LLMs: What 128GB Unified Memory Actually Buys You
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090