Yahboom
Yahboom Jetson Orin Super/Xavier NX Case Acrylic Protective Case Strong and Transparent Precise Hole Design (Without Antenna)
Bottom line: The Yahboom Jetson Orin Super/Xavier NX Case Acrylic Protective Case is a specs-and-price decision rather than a crowd-consensus one in the single-board computers category, priced around $12.99 on Amazon as of 2026-10-07. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Packing List Acrylic Components*6, Rivet*4, Copper screw*N
- ✓ Backed by Yahboom's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
About this item Yahboom uses acrylic case with dual antennas to improve the weak signal caused by the original Jetson board without antenna. The external antenna makes the signal more stable and the wiring can be used normally. (Without Antenna) Yahboom acrylic case, compatible with NIVDIA Jetson Orin Nano，Orin NX，Xavier NX, TX2-NX motherboard, precise hole design, reserved fan holes for heat dissipation Supports the fixation of dual cameras, you can also connect a single camera (the camera module and camera case are not included) Instructions are not included in the package, please check…
SpecPicks Verdict
SpecPicks scored Yahboom Jetson Orin Super/Xavier NX Case Acrylic Protective Case… using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. Yahboom's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Yahboom uses acrylic case with dual antennas to improve the weak signal caused by the original Jetson board without antenna. The external antenna makes the signal more stable and the wiring can be used normally. (Without Antenna)
- Yahboom acrylic case, compatible with NIVDIA Jetson Orin Nano，Orin NX，Xavier NX, TX2-NX motherboard, precise hole design, reserved fan holes for heat dissipation
- Supports the fixation of dual cameras, you can also connect a single camera (the camera module and camera case are not included)
- Instructions are not included in the package, please check the installation video at the bottom of the product page. (Note Before assembling the case, users need to remove the plastic base on the bottom of the Jetson board, otherwise it will not fit successfully.)
- Packing List Acrylic Components*6, Rivet*4, Copper screw*N
Full Specifications
| UPC | 791568692126 |
|---|---|
| ASIN | B08HMHNRPQ |
| Brand | Yahboom |
| Color | Jetson Xavier NX Acrylic Case |
| Material | Acrylic, Aluminum |
| Case Type | Unknown |
| Model Name | Jetson Orin Super/Xavier NX Case Acrylic Protective Case |
| Manufacturer | Yahboom |
| Model Number | Jetson Orin Super/Xavier NX Case Acrylic Protective Case |
| Built-In Media | CD |
| Cooling Method | Air |
| Antenna Location | Business |
| Compatible Devices | NIVDIA Jetson Orin Nano, Orin NX, Xavier NX, TX2-NX motherboard |
| Enclosure Material | Acrylic, Aluminum |
| Total USB 3.0 Ports | 1 |
| Warranty Description | 1 |
| Hard Disk Form Factor | 3.5 Inches |
| Number of USB 3 Ports | 1 |
| Supported Motherboard | Mini ITX |
| Internal Bays Quantity | 6 |
Ready to buy?
Yahboom Jetson Orin Super/Xavier NX Case Acrylic Protective Case Strong and Transparent Precise Hole Design (Without Antenna) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Single-Board Computers
Yahboom Jetson Orin Super/Xavier NX Case Acrylic… head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- CRT vs Monitor for Retro Gaming: Which Wins in 2026
- Best Budget AM4 Build for Local LLM Inference in 2026
- Best Gaming CPUs for 2026: Why the Ryzen 7 9800X3D Leads the Pack
- Best 1440p Monitor for the RTX 3060 in 2026: Picks That Actually Match
- Forza Horizon 6 Boots in 4 Seconds with Advanced Shader Delivery
- Best GPU for ComfyUI and SDXL Under $400 in 2026
- Build a Low-Power Jellyfin Server on a Raspberry Pi 4 8GB in 2026
- Is the Logitech G502 Hero Still the Best FPS Mouse in 2026?
- Building a Period-Correct 2003 LAN Party Rig with Athlon XP and Audigy 2 ZS
- Best Retro Gaming Consoles and Controllers to Buy in 2026
- Linux Now Boots on a Sega Genesis — Here's What That Actually Means
- Sound BlasterX G6 for Retro Gaming PC Audio in 2026
- How to run Qwen 3 32B on AMD Radeon RX 7900 XTX
- Best Quiet CPU Cooler for Ryzen 7 3700X Silent Builds in 2026
- RTX 3060 12GB vs RTX 4060 Ti 16GB for Qwen2.5-Coder 14B (2026)
- Best Streaming and Podcasting Gear for 2026: 5 Picks for Mic, Light, and Monitoring
- Best CPU Cooler for the Ryzen 7 5800X: Air vs 120mm vs 240mm AIO
- Microsoft's SkillOpt Boosts GPT-5.5 With Just a Trained Markdown File
- Asus ProArt PA27USD 27-Inch OLED Review: Color Meets Gaming Speed
- Can Local LLMs Actually Do Anything Useful?
- Best SSD for Retro PC IDE-to-SATA Builds (Win98, WinXP) in 2026
- Best Parts for a Budget Ryzen + RTX 3060 Gaming PC Build in 2026
- Best Streaming Gear for New Streamers in 2026: 5 Picks to Start On-Air
- Running local LLMs on the Ryzen 5 5600G iGPU (no dedicated GPU) in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090