Skip to main content
DAOKI CNC Shield V3.0 Expansion Board Kit with Board for Arduino, 4PCS DRV8825 Stepper Motor Driver and Heatsink, 10PCS Jumper Cap, USB Cable for Engraving Machine
DAOKI

DAOKI CNC Shield V3.0 Expansion Board Kit with Board for Arduino

Bottom line: The DAOKI CNC Shield V3.0 Expansion Board Kit with Board for Arduino is a specs-and-price decision rather than a crowd-consensus one in the cooling & fans category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar cooling & fans

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Backed by DAOKI's warranty and support channels

Cons

  • ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

Manufacturer description

Description:CNC Shield Board:Latest Arduino CNC Shield Version 3.0GRBL 0.9 compatible4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )DRV8825 Stepper Motor Driver Module:1.A simple steps and direction control interface2.Six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step3.CAN interface directly with 3.3 V and 5 V systems4.Over-temperature thermal shutdown…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored DAOKI CNC Shield V3.0 Expansion Board Kit with Board for Arduino using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. DAOKI's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • Board for Arduino: Operating Voltage: 5V; Digital I/O Pins: 14 (of which 6 provide PWM output)
  • DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step);Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)
  • Package Content:1 x CNC shield V3.0 Board, 4 x DRV8825 Stepper Motor Driver, 4 x Heatsink, 1 x Board for Arduino, 1 x USB cable, 1 x DC Power Cable, 10 x Jumper Cap

Full Specifications

BrandDAOKI
Model NameDAOKI CNC Shield V3.0
Unit Count1 Count
ConnectivityUSB
Model NumberDR-US-341
Built-In Media1 x CNC shield V3.0 Board, 4 x DRV8825 Stepper Motor Driver, 4 x Heatsink, 1 x Board for Arduino, 1 x USB cable, 1 x DC Power Cable, 10 x Jumper Cap
Mfr Part NumberDR-US-341
Number of Items1
Package Content1 x CNC shield V3.0 Board, 4 x DRV8825 Stepper Motor Driver, 4 x Heatsink, 1 x Board for Arduino, 1 x USB cable, 1 x DC Power Cable, 10 x Jumper Cap
Processor Count1
Total Usb Ports1
Board for ArduinoOperating Voltage: 5V; Digital I/O Pins: 14 (of which 6 provide PWM output)
Compatible DevicesGeneric USB devices, GRBL 0.9 compatible CNC machines
Included Components1 x CNC shield V3.0 Board, 4 x DRV8825 Stepper Motor Driver, 4 x Heatsink, 1 x Board for Arduino, 1 x USB cable, 1 x DC Power Cable, 10 x Jumper Cap
Connectivity TechnologyUSB
Full listing titleDAOKI CNC Shield V3.0 Expansion Board Kit with Board for Arduino, 4PCS DRV8825 Stepper Motor Driver and Heatsink, 10PCS Jumper Cap, USB Cable for Engraving Machine

Ready to buy?

DAOKI CNC Shield V3.0 Expansion Board Kit with Board for Arduino, 4PCS DRV8825 Stepper Motor Driver and Heatsink, 10PCS Jumper Cap, USB Cable for Engraving Machine is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Cooling & Fans

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
DAOKI CNC Shield V3.0 Expansion Board Kit with Board for Arduino, 4PCS DRV8825 Stepper Motor Driver and Heatsink, 10PCS Jumper Cap, USB Cable for Engraving Machine
View on Amazon →