ZAWDIO MIDI to 3.5mm Breakout Cable for
Bottom line: The ZAWDIO MIDI to 3.5mm Breakout Cable for: Type A pinout replaces a lost MPC Studio, MPC Touch, or MPX8 dongle without adapters; main trade-off: only 20 cm end to end, so gear must sit close to the host device.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Type A pinout replaces a lost MPC Studio, MPC Touch, or MPX8 dongle without adapters
- ✓ Wide compatibility list: Akai Force, Korg Electribe 2, NTS-1, SQ-1, Launchpad Pro MK3
- ✓ 20 cm length keeps desks and pedalboards tidy on cramped synth setups
- ✓ Female 5-pin DIN end accepts any standard MIDI cable you already own
Cons
- ✗ Only 20 cm end to end, so gear must sit close to the host device
- ✗ Type A only, so Type B devices need a different pinout cable
- ✗ Not compatible with Launchpad Pro MK2, only MK3
- ✗ Single cable per port, so multi-device rigs need several purchases
Manufacturer description
MIDI to TRS 3.5mm male Type A. It's 20 cm's long end to end.Thinner MIDI devices have manufacturers moving to an external dongle to accommodate the wider midi plug.Zawdio introduces our MIDI TRS Type A cable.This is a non-standard pinout Midi to 3.5mm cable built to replace the missing MIDI dongle from the following manufactures.This pinout, commonly called the Type A cable, is is compatible with:16N FaderbankAddac 221 & 222Akai ForceAkai MPC Studio & Studio BlackAkai MPC TouchAkai MPX-8ALM Busy Circuits PEXP-2 ExpanderBoss RC-10RCritter & Guitari Organelle M Gen 2Dreadbox Lil’ ErebusEmpress…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ZAWDIO MIDI to 3.5mm Breakout Cable for, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the audio & midi category before committing. On the listing's own facts, the case for it is "Type A pinout replaces a lost MPC Studio, MPC Touch, or MPX8 dongle without adapters"; the main trade-off is "Only 20 cm end to end, so gear must sit close to the host device". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Midi (5 Pin DIN) Female to 3.5 mm (1/8") TRS Male Cable
- Type A Compatible with:
- Akai MPC Studio, MPC Touch, & MPX8
- Korg Electribe 2, NTS1, SQ1
- Novation Launchpad Pro MK3 (Not MK2)
- Full list of compatible hardware below:
Full Specifications
| Brand | ZAWDIO |
|---|---|
| Color | Black Blue |
| Model | ZAW_MIDI_003 |
| Cable Type | MIDI |
| Item Shape | Round |
| Unit Count | 1.0 Count |
| Part Number | ZAW_MIDI_003 |
| Connector Type | 3.5mm Trs Midi 5 Pin Din |
| Number of Pins | 5 |
| Number of Items | 1 |
| Special Feature | Braided |
| Connector Gender | Male-to-Female |
| Specification Met | Midi Compliance |
| Compatible Devices | Akai MPC Studio, MPC Touch, MPX8, Korg Electribe 2, NTS1, SQ1, Novation Launchpad Pro MK3, Line-6 Mobilizer, Littlebits - MIDI Module, and others listed in the 'title' and 'bullet_point' fields |
| Data Transfer Rate | 31250 Bits Per Second |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Connectivity Technology | MIDI |
| Recommended Uses For Product | Connecting MIDI devices with 5-pin DIN connectors to other devices with 3.5mm TRS inputs for musical performances and productions |
| Global Trade Identification Number | 00716988700602 |
| Other Special Features of the Product | Braided |
| Full listing title | MIDI to 3.5mm Breakout Cable for - Akai, Korg, Line6, LittleBits - Midi Female to TRS 3.5mm Male - MPC Studio,Touch, MPX8, Electribe 2,SQ-1 |
Ready to buy?
MIDI to 3.5mm Breakout Cable for - Akai, Korg, Line6, LittleBits - Midi Female to TRS 3.5mm Male - MPC Studio,Touch, MPX8, Electribe 2,SQ-1 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Audio & MIDI
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Coding Agents Can Run Hidden Malware: Why a Sandboxed Local Rig Matters
- Intel Arc Stable Diffusion WebUI: Setup & Performance 2026
- Raspberry Pi 5 IOMMU Support Lands in Mainline Linux: What It Means
- Ollama vs vLLM vs llama.cpp on a 12GB GPU: Which Wins for One User?
- Hailo-10H AI Accelerator on Raspberry Pi 5: Real Tok/s for On-Device LLMs
- Sound Blaster Audigy FX in a Period-Correct Win98 Gaming Build
- Ryzen AI Max vs RTX 4060: Which Fits Your Build?
- Gemma 4 31B on a 12GB RTX 3060: Quantization, VRAM, and Real tok/s
- Best Storage for a Raspberry Pi Homelab: SATA SSD over USB vs microSD
- Best CPU for Streaming and Gaming on a Single PC in 2026
- Build a Pocket RetroPie Handheld on a Raspberry Pi Zero W (2026 BOM)
- Sound Blaster Audigy 2 ZS vs Aureal Vortex 2: The Last Great Win98 Audio Battle
- Forza Horizon 6 Advanced Shader Delivery: 4-Second Loads vs 90 Seconds Explained
- Kingston 2GB DDR Modules: Identifying and Buying RAM for a 2004-Era Retro PC
- Linux Fu: Upcycling an Old Router in 2026
- Frontier Models Cheat on Security Tests: Why You Should Eval Locally
- Best Budget Gaming Mouse + Mousepad Combo Under $80 in 2026
- Pentium 4 + Radeon 9700 Pro Windows XP Build in 2026
- Best Budget GPU for Local 12B–14B LLM Inference: Why the RTX 3060 12GB Still Wins
- Benchmarking Open LLMs for Tool-Use: RTX 3060 12GB vs Ryzen 5800X CPU-Only
- Best Sim Racing Wheel Setup 2026: G920 vs HORI vs TH8A
- Gemma 4 Tool-Calling Fix: Re-test Function Calls Locally
- Raspberry Pi 4 as an SMB1 File Server for Windows 98 Retro Rigs
- RTX 5080 vs RTX 4090: Which GPU Is Best in 2026?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090