Skip to main content
Waveshare PoE HAT for Raspberry Pi 4B/3B+, Power Over Ethernet (PoE) Support 802.3af, Compatible with Official Case, Supports Cooling Fan
waveshare

Waveshare PoE HAT for Raspberry Pi 4B/3B+

Bottom line: The Waveshare PoE HAT for Raspberry Pi 4B/3B+ ($20.15 on Amazon as of 2026-11-22 13:15 UTC, orderable but not in stock): 802.3af-compliant PoE delivers 5V/2.5A to a Pi 4B over a single Ethernet run; main trade-off: 2.5A output leaves little headroom for power-hungry USB peripherals.

$20.15 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ 802.3af-compliant PoE delivers 5V/2.5A to a Pi 4B over a single Ethernet run
  • ✓ Fully isolated switched-mode supply separates Pi rails from 37V-57V PoE input
  • ✓ Fits inside the official Raspberry Pi 4 case without modification
  • ✓ Onboard header drives a cooling fan, no separate power feed needed
  • ✓ Compact 65 x 32mm layout clears surrounding GPIO and port space

Cons

  • ✗ 2.5A output leaves little headroom for power-hungry USB peripherals
  • ✗ Only supports 3B+ and 4B, so Pi 5 and older boards are excluded
  • ✗ Requires an 802.3af injector or switch you must supply separately
  • ✗ Fan header specs and included hardware are not listed in the product details

Manufacturer description

About this item Power Over Ethernet HAT for Raspberry Pi 3B+/4B, compatible with official case,support connecting cooling fan. PoE (Power Over Ethernet) capability,IEEE 802.3af-compliant Fully isolated switched-mode power supply (SMPS) Smaller and more flexible with a more compact component layout POE Power Input: 37V~57V DC. POE Power Output: 5V/2.5A DC. Network Standard: 802.3af PoE-compliant. Dimensions: 65.00 × 32.00mm. › See more product details

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Waveshare PoE HAT for Raspberry Pi 4B/3B+, so this read rests on the manufacturer's listed specs and the current price in the single board computers category (how we evaluate). Compare with similarly-priced alternatives in the single board computers category before committing. On the listing's own facts, the case for it is "802.3af-compliant PoE delivers 5V/2.5A to a Pi 4B over a single Ethernet run"; the main trade-off is "2.5A output leaves little headroom for power-hungry USB peripherals". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Power Over Ethernet HAT for Raspberry Pi 3B+/4B, compatible with official case,support connecting cooling fan.
  • PoE (Power Over Ethernet) capability,IEEE 802.3af-compliant
  • Fully isolated switched-mode power supply (SMPS)
  • Smaller and more flexible with a more compact component layout
  • POE Power Input 37V~57V DC. POE Power Output 5V/2.5A DC. Network Standard 802.3af PoE-compliant. Dimensions 65.00 × 32.00mm.

Full Specifications

ASINB0974TK3KD
Brandwaveshare
Model NamePoE HAT
ManufacturerWaveshare
Model NumberBC-Official POE+ HAT for RPi-C
Built-In MediaPoE HAT (E) for Raspberry Pi 3B+/4B
Mfr Part NumberBC-Official POE+ HAT for RPi-C
Compatible DevicesRaspberry Pi 3B+, Raspberry Pi 4B
Included ComponentsPoE HAT (E) for Raspberry Pi 3B+/4B
RAM Memory TechnologyLPDDR4
Connectivity TechnologyEthernet
Item Dimensions L x W x H2.55"L x 1.25"W x 0.11"H
Full listing titleWaveshare PoE HAT for Raspberry Pi 4B/3B+, Power Over Ethernet (PoE) Support 802.3af, Compatible with Official Case, Supports Cooling Fan

Ready to buy?

Waveshare PoE HAT for Raspberry Pi 4B/3B+, Power Over Ethernet (PoE) Support 802.3af, Compatible with Official Case, Supports Cooling Fan is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Current Price on Amazon

*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Single Board Computers

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →