Ferraycle No Clean Soldering Pen and Solder Remover Wick
Bottom line: The Ferraycle No Clean Soldering Pen and Solder Remover Wick: 3 flux pens + 3 solder wicks, 6 pieces total; main trade-off: only one braid width (2.5 mm) included; no finer size.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 3 flux pens + 3 solder wicks, 6 pieces total
- ✓ 10 ml flux pens with soft brush tip for controlled application
- ✓ Brush tip cleans pads without harming copper foil or IC pins
- ✓ Copper braid wick is 59 in (1.5 m) long per piece
- ✓ 2.5 mm wide braid suits through-hole joints and bridged pins
Cons
- ✗ Only one braid width (2.5 mm) included; no finer size
- ✗ Flux chemistry and rosin content not specified
- ✗ No solder, iron, or tips included; consumables only
- ✗ No refill option mentioned for the flux pens
Manufacturer description
The Ferraycle no clean soldering pen and solder remover wick kit gives you two essential rework consumables in one package: 3 liquid flux pens and 3 copper solder braids, 6 pieces in total. It suits anyone repairing PCBs, restoring retro consoles, or fixing through-hole joints on vintage PC boards. Each flux pen holds 10 ml and is about 14.3 cm (5.6 inches) long. A soft brush tip lets the flux flow at a moderate rate, so you can wet pads and IC pins without scrubbing the copper foil. The pen body keeps the solvent sealed, so you won't need an open bottle or a dropper on your bench. The…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Ferraycle No Clean Soldering Pen and Solder Remover Wick, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "3 flux pens + 3 solder wicks, 6 pieces total"; the main trade-off is "Only one braid width (2.5 mm) included; no finer size". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How many flux pens and solder wicks come in the Ferraycle kit?
You get 6 pieces: 3 no clean flux pens and 3 copper solder braid wicks.
How wide and long is the solder wick?
Each braided wick is about 2.5 mm (0.1 inches) wide and 1.5 m (59 inches) long.
How much flux does each pen hold?
Each pen holds 10 ml of liquid flux and is about 14.3 cm (5.6 inches) long, with a soft brush tip.
Can I use this kit for through-hole desoldering on old circuit boards?
Yes. The listing names through-hole solder joints, small PCB error correction, computer and home repairs, and electronics welding as intended uses.
Does the kit include a warranty?
The product details don't state warranty terms. Check the product listing for current warranty and return terms.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Package includes: you will receive 3 pieces of no clean solder pens, and 3 pieces of soldering braided wick, in total of 6 pieces, sufficient quantity and a considerate combination to meet your needs for daily use and replacement
- Suitable size: the rosin pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5m/ 59 inches long and 2.5mm/ 0.1 inches wide, which is convenient to hold in hand; Please check the size carefully before purchasing
- Quality material: these no clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents
- Practical tools: 10-ml solder pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin; The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards
- Wide applications: these soldering pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency
Full Specifications
| Brand | Ferraycle |
|---|---|
| Material | copper |
| Part Number | Ferraycle-Flux Pen-17 |
| Item Package Quantity | 1 |
| Full listing title | No Clean Soldering Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Flux for Electronics Welding Repair Tabbing Wire Maintenance |
Ready to buy?
No Clean Soldering Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Flux for Electronics Welding Repair Tabbing Wire Maintenance is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best SSD for a Local-LLM Rig in 2026: NVMe vs SATA
- When Gemini Debugs Your Linux Boot: Agentic Sysadmin on a Local RTX 3060 Rig
- Best Storage Upgrades for a Legacy or Retro PC in 2026
- 2000s LAN Party Modern Setup Guide: Hardware, Cables, and Server Stack in 2026
- Best Controller for PC Emulation in 2026: Pro 2 vs DualSense
- RTX 5090 vs RTX 5080: Which Should You Buy in 2026?
- Raspberry Pi Projects for Home Automation in 2025
- Sound Blaster on a Retro Gaming PC: Period-Correct Audio and the Modern G6 Bridge
- The Truth About Sega's TradeMark Security System (TMSS)
- Best Wireless Productivity Keyboards Under $50 in 2026
- RX 9070 XT vs RTX 5080 for a 9800X3D Build (2026)
- Best CPU Cooler for AM5 Ryzen 9 Overclocking (2026)
- Best Wireless Gaming Controller for PC and Console (2026)
- Open Source AI Code Reviewers You Can Self-Host in 2025
- Voodoo5 5500 PCI in a Modern Board: Install, Glide & Win98 Setup
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a 2026 Build
- Pushing a 6GB VRAM Laptop to Its Limits With Qwen3.6-35B-A3B
- Best Webcam for Streaming and Video Calls Under $200 (2026)
- CompactFlash as a Retro PC Boot Drive: The 2026 CF-to-IDE Build Guide
- Modern CRT Monitor for Retro Gaming: The 2025 Reality Check
- Qwen 3.6 27B vs Gemma 4 31B Local Inference: VRAM, Tok/s, and Quality Across Quantizations
- CPU Fan Angled Left on a New Prebuilt: Normal or Not?
- Ryzen AI Halo vs a DIY RTX 3060 Box for Local LLMs in 2026
- Rescue a Dying Retro PC: Image Your IDE Drive to CompactFlash First
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090