Skip to main content
PCIe 1x SATA Expansion Card (10-Port), 6 Gbps SATA 3.0 Controller PCIe Expansion Card, Non-RAID, Includes Low-Profile Bracket and 10 Data Cables (Chip: ASM1166)
BEYIMEI

BEYIMEI PCIe 1x SATA Expansion Card (10-Port)

Bottom line: The BEYIMEI PCIe 1x SATA Expansion Card: 10 SATA 3.0 ports at 6Gbps each from a single PCIe slot; main trade-off: non-RAID: arrays must be built in software.

Live pricing on eBay

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 10 SATA 3.0 ports at 6Gbps each from a single PCIe slot
  • ✓ ASMedia ASM1166 controller with an attached heat sink
  • ✓ Fits PCIe x1, x4, x8 and x16 slots; PCIe 3.0 compliant
  • ✓ Ships with 10 SATA data cables and a low-profile bracket
  • ✓ Hot-swap support; works with HDDs, SSDs and optical drives

Cons

  • ✗ Non-RAID: arrays must be built in software
  • ✗ Synology recognizes only 4 of the 10 drives
  • ✗ Windows 7 not recommended by the seller
  • ✗ All 10 ports share one PCIe x1 link, limiting combined throughput

Manufacturer description

The BEYIMEI 10-port PCIe SATA expansion card adds ten SATA 3.0 ports to your system from a single PCI-Express x1 slot. It's built for anyone running out of motherboard SATA headers, whether that's a home NAS, a media server or a desktop full of drives. The card uses the ASMedia ASM1166 controller under a heat sink. It meets the PCIe 3.0 specification and works in PCIe 2.0 and 1.0 slots too. It fits x1, x4, x8 and x16 slots, so you can use whichever slot is free. Each port runs at up to 6Gbps and also supports SATA 2 (3Gbps) and SATA 1 (1.5Gbps) devices. Hard drives, SSDs and optical drives…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for BEYIMEI PCIe 1x SATA Expansion Card, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. On the listing's own facts, the case for it is "10 SATA 3.0 ports at 6Gbps each from a single PCIe slot"; the main trade-off is "Non-RAID: arrays must be built in software". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this 10-port SATA card fit in a PCIe x16 slot?

Yes. The card uses a PCIe x1 connector and works in x1, x4, x8 and x16 slots. The seller recommends a PCIe 3.0 slot for the best speed.

Does the BEYIMEI ASM1166 card support RAID?

No. It is a non-RAID controller that presents each drive on its own. If you need RAID, set it up in your operating system or NAS software.

Can I use all 10 ports in a Synology NAS?

No. The seller notes that Synology systems recognize only 4 hard drives on this card. For all 10 ports, use Windows 8/10, Ubuntu or another Linux distribution.

Does it need drivers on Windows 10 or Linux?

No separate driver install is needed. The card is plug and play on Windows 8, Windows 10, Ubuntu and Linux. The seller does not recommend it for Windows 7.

What comes in the box, and does it fit a low-profile case?

The card comes with 10 SATA data cables and a low-profile bracket, so it fits slim and small form factor cases. SATA power for each drive comes from your power supply.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【10 Ports PCI-E to SATA 3.0】This PCIE SATA CARD allows you to add 10 SATA 3.0 6Gbps devices to your computer. No need to drive, plug and play.
  • 【PCI-Express X1 interface】Compatible with PCI-Express X1 /X4 /X8 /X16 slots.(Recommended under PCI-E 3.0, faster use)
  • 【Powerful chip】ASMedia ASM1166 Chip, with heat sink, long-lasting high temperature resistance, high-speed and stable transmission.
  • 【System support】Compatible with Windows/8/10/Ubuntu/Linux.Support SATA interface hard disk/optical drive/SSD solid state drive.
  • Compatible with SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps)。Comply with PCI-Express 3.0 specification and backward compatible with PCI-Express 2.0.

Full Specifications

BrandBEYIMEI
StyleClassic
Style NameClassic
Unit Count10.0 Count
Model NumberBEYIMEI PCIE 1X SATA Card 10 Ports
CompatibilityLinux
Compatible DevicesPersonal Computer, Server, NAS Device
Hardware InterfacePCI Express x1
Warranty Description1
Full listing titlePCIe 1x SATA Expansion Card (10-Port), 6 Gbps SATA 3.0 Controller PCIe Expansion Card, Non-RAID, Includes Low-Profile Bracket and 10 Data Cables (Chip: ASM1166)

Ready to buy?

PCIe 1x SATA Expansion Card (10-Port), 6 Gbps SATA 3.0 Controller PCIe Expansion Card, Non-RAID, Includes Low-Profile Bracket and 10 Data Cables (Chip: ASM1166) is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

See live eBay listings → Check Amazon listing →

Related Expansion Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →