Klein Tools 80031 Screwdriver Set
Bottom line: The Klein Tools 80031 Screwdriver Set ($34.99 on Amazon as of 2026-10-06): Made in USA kit: #1/#2 Phillips, 3/16 in cabinet, 1/4 in keystone, #2 square; main trade-off: no Torx, hex or security bits for retro consoles and cartridges.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Made in USA kit: #1/#2 Phillips, 3/16 in cabinet, 1/4 in keystone, #2 square
- ✓ Tip-Ident dome markings identify each tip type at a glance
- ✓ Heat-treated, chrome-plated blades resist corrosion
- ✓ Double-flange blades anchor in the handle for twist-resistant torque
- ✓ Narrow 3/16 in cabinet tip reaches screws in tight spaces
Cons
- ✗ No Torx, hex or security bits for retro consoles and cartridges
- ✗ Smallest Phillips is #1; no #0 or #00 for laptops or small electronics
- ✗ Only five fixed drivers; no interchangeable bits
- ✗ No storage case or roll listed in the kit contents
Manufacturer description
The Klein Tools 80031 screwdriver set includes the five tips you reach for most: #1 and #2 Phillips, a 3/16-inch cabinet, a 1/4-inch keystone and a #2 square-recess driver. Every piece is made in the USA, with heat-treated, chrome-plated blades that resist corrosion over the life of the tool. The #1 Phillips sits on a 3-inch round shank that is precision-machined for an accurate fit, so you can drive small screws without slippage. The 3/16-inch cabinet tip is narrow enough to reach screws in tight spaces. The 1/4-inch keystone tip has a bolster-reinforced shank built for demanding, hard-use…
SpecPicks Verdict
SpecPicks scored Klein Tools 80031 Screwdriver Set using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Which screwdriver tips come in the Klein Tools 80031 set?
You get five drivers: #1 Phillips, #2 Phillips, a 3/16-inch cabinet slotted tip, a 1/4-inch keystone slotted tip and a #2 square-recess tip.
Can I use this set to open retro PC cases and game consoles?
The #2 Phillips and slotted tips cover many standard case screws. The set has no Torx or security bits, so consoles and cartridges with security screws need a separate driver.
How long are the screwdriver shanks?
Klein lists a 3-inch round shank on the #1 Phillips and a 4-inch shank on the #2 square driver. Check the product listing for the lengths of the other three drivers.
Will the blades rust or wear quickly?
The blades are heat-treated and chrome-plated for corrosion resistance and durability. Double-flange blades anchor inside the handles so the blade does not twist under torque.
What warranty comes with the Klein Tools 80031?
The product details do not state any warranty terms. Check the product listing or Klein Tools directly for current coverage.
Key Features
- SMART BUY: A complete, high-performance kit that offers convenience and value
- MADE IN USA 5-PIECE SCREWDRIVER SET: Comes with the most frequently used screwdrivers
- ASSORTMENT OF TIPS: Include #1 and #2 Phillips, 3/16-Inch Cabinet, 1/4-Inch Keystone, and #2 Square
- EASY TYPE AND TIP IDENTIFICATION: Tip-Ident provides bold dome markings to quickly align screwdriver tip for greater efficiency and faster tool swapping
- CHROME-PLATED BLADES: Heat-treated and chrome-plated blades provide corrosion resistance and added durability throughout the life of the tool
- CUSHION-GRIP HANDLES: Provide greater torque and comfort for consistent and continual driving
Full Specifications
| Brand | KLEIN TOOLS |
|---|---|
| Color | Black/Yellow |
| Material | Alloy Steel |
| Head Size | #1, #2 Phillips; 1/4-Inch, 3/16-Inch Slotted, Square |
| SMART BUY | A complete, high-performance kit that offers convenience and value |
| Head Style | 3/16-Inch Cabinet tip, 1/4-Inch Keystone tip, #1 and #2 Phillips tips, and #2 Square tip |
| Model Name | 80031 |
| Unit Count | 5.0 Count |
| Model Number | 80031 |
| Material Type | Alloy Steel |
| Item Type Name | Screwdriver Set, 5-Piece Kit Includes 2 Slotted, 2 Phillips and 1 Square Tip Screwdriver, Cushion Grip Comfort |
| Item Dimensions | 12 x 9 x 1.5 inches |
| Number of Items | 1 |
| Special Feature | Soft Grip |
| ASSORTMENT OF TIPS | Include #1 and #2 Phillips, 3/16-Inch Cabinet, 1/4-Inch Keystone, and #2 Square |
| Included Components | Screwdriver Set, 5-Piece Kit Includes 2 Slotted, 2 Phillips and 1 Square Tip Screwdriver, Cushion Grip Comfort |
| CHROME-PLATED BLADES | Heat-treated and chrome-plated blades provide corrosion resistance and added durability throughout the life of the tool |
| CUSHION-GRIP HANDLES | Provide greater torque and comfort for consistent and continual driving |
| DOUBLE-FLANGE BLADES | Anchor inside handles to provide solid, twist-resistant connection for greater torque |
| Manufacturer Part Number | 80031 |
| Full listing title | Klein Tools 80031 Screwdriver Set, Made in USA, 5-Piece Kit Includes 2 Slotted, 2 Phillips and 1 Square Tip Screwdriver, Cushion Grip Comfort |
Ready to buy?
Klein Tools 80031 Screwdriver Set, Made in USA, 5-Piece Kit Includes 2 Slotted, 2 Phillips and 1 Square Tip Screwdriver, Cushion Grip Comfort is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Forza Horizon 6: Is 8GB VRAM Enough or Do You Need an RTX 3060 12GB?
- UT99 OldUnreal 469 Patch in 2026: Migration, Servers, and Period-Correct Controller Mapping
- Best GPU for Llama 70B Local Inference in 2026: RTX 3060 12GB Dual vs RTX 3090 vs Gorgon Halo
- Qwen 3.6 35B-A3B vs Qwen 3.6 27B Dense: Which Local LLM Wins on a Single 24GB GPU?
- How to Find and Join Active Retro Multiplayer Servers in 2026 (Quake 3, UT99, CS 1.6, Diablo II)
- Kingston A400 960GB vs Crucial BX500 1TB for a PS4 Pro SSD Upgrade
- OpenAI Tripled Revenue to $5.7B but Burned $3.7B: What It Means for Local AI
- Ling 2.6 1T on Local Hardware: Can You Actually Run a Trillion-Parameter Model at Home in 2026?
- Linux Beats Windows 11 on the Ryzen 9 9950X3D2, Phoronix Finds
- Bilingual Voice Agents: Frontier ASR on Code-Switched Speech
- Best Wireless Gaming Controller for PC and Console (2026)
- CompactFlash to IDE Adapter Won't Boot on Windows 98: Troubleshooting Guide 2026
- Ryzen 7 5700X + RTX 3060 12GB: A Balanced 1440p Build in 2026
- Jensen Huang Heads to Tokyo as Sega's 1996 Bet on Nvidia Is Remembered
- GPT-5.6 Sol Ships Under Government Access OpenAI Calls Unsustainable
- How to Image and Preserve Vintage IDE and CompactFlash Drives in 2026
- Hugging Face Says an AI Agent Breached Its Infrastructure
- RTX 5090 vs RTX 4090 — is the Blackwell upgrade worth it?
- Oomwoo Is a New Open-Source Robot Vacuum You Can 3D Print
- Panther Lake NPU vs RTX 3060 12GB for Local LLM Inference
- Anthropic's Samsung Chip Talks: Why Local Inference on an RTX 3060 Still Matters
- Best Cooler for a Ryzen 7 5800X: ML240L RGB V2 vs Kraken M22
- Building multi-agent AI orchestrators — LangGraph, DSPy, n8n, and picking the right one
- Best 1440p 240Hz Gaming Monitors in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090