Skip to main content
Wiha Insulated Screwdriver Set, 10-Piece 1000V Electrician Tool Kit

Wiha Insulated Screwdriver Set, 10-Piece 1000V Electrician Tool Kit

Bottom line: The Wiha Insulated Screwdriver Set: Each driver individually tested to 10,000V AC, rated for live work at 1,000V AC / 1,500V DC; main trade-off: slotted and Phillips only, no Torx, square or hex in the 10-piece lineup.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC and retro-hardware cleaning and maintenance tools, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Each driver individually tested to 10,000V AC, rated for live work at 1,000V AC / 1,500V DC
  • ✓ VDE certified to EN/IEC 60900, ASTM F1505 and CSA, not just marketing language
  • ✓ Ten tips: slotted 2.0-6.5mm plus Phillips #0-#3 covers panels and fine electronics
  • ✓ SoftFinish dual-durometer grip molded straight to the blade so handles cannot work loose

Cons

  • ✗ Slotted and Phillips only, no Torx, square or hex in the 10-piece lineup
  • ✗ Metric slotted sizing (2.0-6.5mm) takes adjustment if you think in fractional inches
  • ✗ Insulated shafts are thicker than bare drivers, awkward in cramped enclosures
  • ✗ Black oxide finish resists corrosion but shows wear faster than a plated shaft

Manufacturer description

The Wiha 32093 insulated screwdriver set gives you ten 1000V-rated drivers built for work on energized circuits. Every driver is individually tested to 10,000 volts AC and rated to 1,000 volts AC (1,500 volts DC), with VDE certification to EN/IEC 60900, ASTM F1505, and CSA standards. The 10-piece spread covers slotted 2.0, 2.5, 3.0, 3.5, 4.5, and 6.5mm plus Phillips #0, #1, #2, and #3, so one roll handles panel screws, terminal blocks, and fine electronics without reaching for a second kit. Wiha molds its SoftFinish dual-durometer cushion grip directly to the blade, creating a permanent bond…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Wiha Insulated Screwdriver Set, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "Each driver individually tested to 10,000V AC, rated for live work at 1,000V AC / 1,500V DC"; the main trade-off is "Slotted and Phillips only, no Torx, square or hex in the 10-piece lineup". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Can I use these screwdrivers on live electrical circuits?

Yes. Each driver is individually tested to 10,000 volts AC and rated to 1,000 volts AC (1,500 volts DC), VDE certified to EN/IEC 60900, ASTM F1505, and CSA standards. Always follow your own safe work practices and inspect insulation before every use.

What sizes are included in the 10-piece set?

Slotted drivers in 2.0, 2.5, 3.0, 3.5, 4.5, and 6.5mm, plus Phillips #0, #1, #2, and #3. Each tip profile is printed on the handle cap for quick identification.

Does this Wiha set include Torx or square drive tips?

No. The 32093 set is slotted and Phillips only, ten drivers total. If you need Torx or square drive with the same 1000V rating, you would need a separate Wiha insulated set.

Will the cushion grip handles come loose over time?

The SoftFinish dual-durometer grip is molded directly onto the blade for a permanent bond rather than slipped on, so there is no press-fit joint to loosen. Check the product listing for current warranty terms.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 1000-VOLT INSULATED SAFETY: individually tested to 10,000 volts AC and rated to 1,000 volts AC (1,500 volts DC); VDE certified to meet EN/IEC 60900, ASTM F1505, and CSA standards for safe work on energized circuits
  • SOFTFINISH CUSHION GRIP: dual durometer handle molded directly to the blade for a permanent bond; ergonomic cushion grip built for comfort and control through long work sessions
  • COMPLETE TIP VARIETY: set includes 10 precision insulated drivers spanning Slotted & Phillips tips for one dependable kit that covers the job
  • PRECISION TOOL STEEL BUILD: engineered from Wiha premium tool steel with a black oxide finish for corrosion protection; exact fit machined tips reduce cam-out on every turn
  • GERMAN ENGINEERED, BUILT TO LAST: tip profiles clearly labeled on the cap for fast identification; designed and engineered by Wiha in Germany for tradespeople who expect their tools to perform

Full Specifications

BrandWiha
ColorMulti
MaterialBlend
Set NameSlotted & Phillips Set, 10 piece
Head SizeSlotted 2.0, 2.5, 3.0, 3.5, 4.5, 6.5mm | Phillips #0, #1, #2, #3
Head Styleslotted, phillips
Model NameFBA_32093
Unit Count1 Count
Model Number32093
Material TypeBlend
Item Type NameInsulated Cushion Grip Slotted Screwdriver Set, 10 Piece
Item Dimensions3.4 x 6.8 x 11.3 inches
Number of Items1
Special FeatureInsulated SoftFinish
Included ComponentsTools
COMPLETE TIP VARIETYset includes 10 precision insulated drivers spanning Slotted & Phillips tips for one dependable kit that covers the job
Manufacturer Part Number32093
PRECISION TOOL STEEL BUILDengineered from Wiha premium tool steel with a black oxide finish for corrosion protection; exact fit machined tips reduce cam-out on every turn
Recommended Uses For Productfixing
Manufacturer Warranty DescriptionProduct shall be free from defects in materials and workmanship upon delivery

Ready to buy?

Wiha Insulated Screwdriver Set, 10-Piece 1000V Electrician Tool Kit is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Tools & Maintenance

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →