NANKADF DC Power Supply
Bottom line: The NANKADF DC Power Supply: 0-30V and 0-10A output, adjustable continuously with an encoder knob; main trade-off: 30V ceiling rules out higher-voltage loads like some 36V/48V tool packs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 0-30V and 0-10A output, adjustable continuously with an encoder knob
- ✓ 3 memory presets (M1/M2/M3) recall voltage/current combos in one press
- ✓ Shows voltage, current and power at once; setpoints preview before output
- ✓ OVP, OCP, over-heat and short-circuit protection with a buzzer alarm
- ✓ Compact 7.4 x 3.5 x 5.7 in, 2.5 lb body plus a 5V/3.6A fast-charge USB port
Cons
- ✗ 30V ceiling rules out higher-voltage loads like some 36V/48V tool packs
- ✗ Single adjustable output; no second channel for dual-rail circuits listed
- ✗ Only 3 memory slots, which is tight if you test many different devices
- ✗ Ripple and noise figures are not quantified in the listing
Manufacturer description
The NANKADF DC Power Supply is a 30V 10A bench power supply for repair benches, battery work and electronics labs, with fine control at the bench. An encoder knob lets you set output voltage and current anywhere from 0 to the rated maximum. You can preview the setpoint before you apply it, and the display shows voltage, current and power at the same time. Three memory slots (M1/M2/M3) store the voltage and current pairs you use most. One button press recalls a 5V logic rail or a 12V test setup without turning the knob again. A separate output enable/disable button cuts power to the load…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for NANKADF DC Power Supply, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "0-30V and 0-10A output, adjustable continuously with an encoder knob"; the main trade-off is "30V ceiling rules out higher-voltage loads like some 36V/48V tool packs". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What voltage and current range does the NANKADF bench power supply cover?
Output voltage adjusts continuously from 0 to 30V and current from 0 to 10A using the encoder knob. The display shows voltage, current and power at the same time.
How do the memory presets work?
There are three internal memory groups, M1, M2 and M3. Each one stores a voltage and current combination, and pressing its button recalls that setting so you don't have to dial it in again.
What happens if my circuit shorts while it is connected?
The supply has over-voltage, over-current, over-heat and short-circuit protection. If it detects a short, it stops output automatically and sounds a buzzer alarm.
Can I charge my phone from it?
Yes. It has a 5V/3.6A USB port that supports several fast-charging protocols, separate from the main adjustable output.
How big is it, and does it come with a warranty?
It measures 7.4 x 3.5 x 5.7 in and weighs 2.5 lb. Warranty terms are not stated here, so check the product listing or contact NANKADF for current coverage.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Higher Precision and Easier to Set: This DC power supply has a precise encoder knob. The output voltage and output current can be continuously adjustable between 0 and nominal value by using coding knobs. The setting value can be also pre-displayed for easy use and adjustment. And it can display voltage, current and power at the same time
- 3 Groups of Memory Storage: Different from general dc power supply, this variable power supply is equipped with three groups of internal memories. You can pre-set 3 groups voltage and current combination that you frequently used and then just recall the memories by pressing the button M1/M2/M3. This is a convienient design to save your time
- Output Enable/Disable Button: When using the bench power supply, the output enable/disable button can prevent us from forgetting to turn off the output and causing damage to the load. Just press this button to turn on or turn off the output of the bench power supply. This makes it more convenient and more efficient to use the bench power supply
- Reliable and Multiple Protections: This adjustable power supply comes with four powerful protection function including over-voltage, over-current, over-heat, short-circuit. Designed with perfect OVP and OCP short circuit protection, the variable dc power supply will automatically stop output and send a buzzer to alert the user when short-circuited of the load equipment occured. The stability and ripple coefficient of the variable power supply also work excellently
- Various Application: The variable dc power supply is compact and lightweight and it only weighs 2.5 lb and measures 7.4 x 3.5 x 5.7 in. It also supports a variety of fast charging protocols. The adjustable power supply can be widely used in mobile phone maintenance, computer maintenance, battery charging, aging testing, laboratories, school teaching and production line as well as other requirements
Full Specifications
| Brand | NANKADF |
|---|---|
| Color | Black(Memory Presets) |
| Weight | 2.5 lb |
| Amperage | 10 Amps |
| Material | Shell |
| Dimensions | 7.4 x 3.5 x 5.7 in |
| Form Factor | benchtop |
| Connectivity | USB |
| Model Number | 0-30v 0-10a |
| Maximum Power | 300 Watts |
| Built-In Media | DC POWER SUPPLY,Output cable, power cord, manual |
| Connector Type | usb |
| Output Current | 10 Amps |
| Output Voltage | 30 Volts (DC) |
| Output Wattage | 300 Watts |
| Item Dimensions | 5.31 x 7.68 x 10.43 inches |
| Mfr Part Number | NPY2 |
| Specification Met | OCP |
| Enclosure Material | Shell |
| Connector Type Used on Cable | usb |
| Full listing title | DC Power Supply, 30V 10A Bench Power Supply with Memory Storage & Recall,Variable Power Suppy with Encoder Adjustment Knob, 5V/3.6A USB Quick-Charge & OCP Short Circuit Alarm |
Ready to buy?
DC Power Supply, 30V 10A Bench Power Supply with Memory Storage & Recall,Variable Power Suppy with Encoder Adjustment Knob, 5V/3.6A USB Quick-Charge & OCP Short Circuit Alarm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- RTX 5080 vs RTX 4080 for LLM Inference: Same 16GB, Different Answer (2026)
- Best Dorm Room Gaming Setup in 2026: 5 Picks That Fit One Desk
- GeForce 4 Ti 4600 AGP in a Windows XP Build: Drivers, Gotchas and Benchmarks
- Are We the Last Generation of PC Builders?
- Best Streaming Kit for New Creators in 2026
- CompactFlash as Your IDE Hard Drive: A Silent, Reliable Retro PC Boot Disk
- Best Fight Stick and Pad for Fighting Games on PC (2026)
- Best Hardware for a Home Game Server in 2026
- LEGO Batman: Legacy of the Dark Knight Runs Well on Steam Deck
- Build an 8-Node Raspberry Pi Cluster for Distributed Computing (2026)
- 4K Mini-LED vs 240 Hz QD-OLED: Which Monitor for Work and Play?
- Small Form Factor Gaming PC Build Guide for 2024
- Intel Arc Pro B60 Gaming Guide: 24GB Battlemage in 2026
- TCL 27R944K Review: 165Hz Mini LED Gaming Monitor
- Apple Sues OpenAI Over Alleged Trade-Secret Theft: What It Means
- Build a Wall-Mounted Raspberry Pi 4 Arcade Cabinet: 3D-Printed Case, SSD Boot, Real BOM
- Raspberry Pi 4/5 Wall Mount Case: 3D Printing Guide
- Best Budget Gaming Keyboard Under $50 in 2026
- Sega Genesis Games Loaded Off a Vinyl Record — and What It Means for Retro Collectors
- US Forces Anthropic to Disable Claude Fable 5: Local Fallbacks
- Best 16GB GPU for Local LLM 2026
- Kimi K3 Nears GPT-5.6 at Half the Cost — And What It Means for Home Rigs
- Using a Raspberry Pi 5 with AI to Recover Lost Windows 98 INF Files (2026)
- Best SSD for Expanding Your Steam Library in 2026: SATA Value Picks
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090