HANMATEK
HANMATEK 3 in 1 Handheld Oscilloscope Multimeter with 2 Channels HO52S 3.5"TFT Oscilloscop
Bottom line: The HANMATEK 3 in 1 Handheld Oscilloscope Multimeter ($138.39 on Amazon as of 2026-10-06): Three instruments in one: 50MHz 2-channel scope, 20000-count multimeter, waveform generator; main trade-off: 50MHz bandwidth limits it to low-speed retro logic, not modern high-frequency buses.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Three instruments in one: 50MHz 2-channel scope, 20000-count multimeter, waveform generator
- ✓ 10000 wfms/s refresh with 125MSa/s sampling and 8k record length on both channels
- ✓ Auto-range 4.5-digit meter handles voltage, current, resistance, diode, continuity, capacitance
- ✓ Separate multimeter and oscilloscope inputs, so no probe swapping between modes
- ✓ USB-C charging plus under 3W draw gives roughly 6 hours of untethered bench time
Cons
- ✗ 50MHz bandwidth limits it to low-speed retro logic, not modern high-frequency buses
- ✗ 3.5-inch TFT is cramped for reading up to 6 simultaneous auto-measurements
- ✗ Storage caps at 4 setups, 4 reference waveforms, 4 images and 4 CSV files
- ✗ 125MSa/s real-time rate is only 2.5x the rated bandwidth, thin for single-shot capture
SpecPicks Verdict
SpecPicks scored HANMATEK 3 in 1 Handheld Oscilloscope Multimeter using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. HANMATEK's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- ① Oscilloscope mode: 1. The waveform refresh rate is as fast as 10000wfms / s. 2. Dual channel, bandwidth up to 50MHZ, real-time sampling rate of 125MSa / s, record length up to 8k. 3. Cursor measurement function. 4. Four automatic measurement functions. 5. XY function. 6. One-key automatic setting function convenient for testing and debugging.
- ②Multimeter mode: 4 1/2 digits of the actual effective value, digital display: 20000 reading. 1. Standard voltage, current, resistance, diode, continuity, capacitance test. 2. The automatic range function is convenient for testing and debugging. 3. Maximum input voltage is 750VAC and 1000VDC. 4. Independent multimeter and oscilloscope inputs. 5. Read hold function. 6. Relative measurement function.
- ④ The USB Type-C interface supports not only mobile power supply but also adapter charging. With ultra-low power consumption of less than 3W, it can operate continuously for about 6 hours. Supports computer connection. When connected to a computer, the oscilloscope is recognized as a USB flash drive and can read stored images and CSV waveforms, which is convenient for displaying and analyzing future waveforms and sharing waveform data.
- ⑤ Save function: 4 sets of settings, 4 sets of reference waveforms, 4 images and 4 sets of CSV format waveforms. By displaying the reference waveform and the measured waveform on the same screen, it is easy to compare the waveforms. Self-calibration function. Up to 6 automatically measured values can be displayed on the screen at the same time.
Full Specifications
| Brand | HANMATEK |
|---|---|
| Color | black |
| Model | HO52S |
| Style | Professional 50 Mhz+Generator |
| Style Name | Professional 50 Mhz+Generator |
| Unit Count | 1.0 Count |
| Part Number | HO52S |
| Connectivity | USB |
| Power Source | Battery Powered |
| Item Dimensions | 9.06 x 5.12 x 2.76 inches |
| Measurement Type | Multimeter |
| Specification Met | ETL |
| Compatible Devices | Electronic devices, circuit boards, power supplies, lab equipment |
| Item dimensions L x W x H | 9.06 x 5.12 x 2.76 inches |
| Full listing title | HANMATEK 3 in 1 Handheld Oscilloscope Multimeter with 2 Channels HO52S 3.5"TFT Oscilloscop, 50Mhz Waveform Generator Multimeter Backlit Screen, Auto-Calibration Function, Memory Function, Multi Tester |
Ready to buy?
HANMATEK 3 in 1 Handheld Oscilloscope Multimeter with 2 Channels HO52S 3.5"TFT Oscilloscop, 50Mhz Waveform Generator Multimeter Backlit Screen, Auto-Calibration Function, Memory Function, Multi Tester is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget SATA SSD for Gaming PC Builds in 2026: 5 Picks Tested for Steam Library Speed
- Intel llm-scaler-vllm 1.4: Arc Pro B70 Inference Support Lands
- Local LLMs for Generating Interactive Textbooks On the Fly
- Best SSD for Steam Deck OLED Expansion in 2026: SATA Adapter vs M.2 2230
- Best Sim Racing Wheel and Shifter Combo for Beginners: Logitech G920 + Thrustmaster TH8A
- Best SSD and Controller Pairing for a Living-Room Gaming PC
- Is the Ryzen 7 5800X Still Worth It for 1440p Gaming in 2026?
- Turtle Beach Recon 50 in 2026: Is the $40 Gaming Headset Still Worth It?
- Razer Soma Chroma Gaming Chair Review: RGB vs. Adjustability
- Best Racing Wheels and Controllers for Sim Racing in 2026
- Building a Local LLM Workstation on a Raspberry Pi 5 + Ryzen 7 5800X Hybrid
- Hailo-10H AI Accelerator on Raspberry Pi 5: Real Tok/s for On-Device LLMs
- OpenAI and Anthropic Are Giving Startups Free Compute — Here's the Local Rig That Replaces It
- 4K 60Hz or 1440p 240Hz? Picking a Monitor for an RTX 3060-Class GPU
- Prime Day 2026: Gaming Monitor Deals Worth a Look
- Linux vs Windows 11: AMD Ryzen 9 9950X3D Performance
- 18 LLMs Benchmarked on OCR: Why Cheaper Models Often Win
- Local LLM Use Cases in 2026: What a 12GB Rig Actually Delivers
- 16% of Freelance Jobs Are Now AI-Doable: The Local Agent Rig That Runs Them
- Best Beginner Racing Wheel in 2026: Logitech G920 vs HORI Racing Wheel Overdrive
- Chrome Using Too Much RAM? Fixes + Hardware Upgrades
- Ryzen 9 9950X3D vs Core Ultra 9 285K
- IDE-to-USB and CompactFlash Adapters for Retro PCs: FIDECO vs Unitek vs Vantec
- Best Wireless Gaming Controller for PC and Console (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090